Пазарувай с до -23% намаление

Гейтове за турбо за BMW Z4 Cabrio E89 sDrive 23 i - 204 коня бензин N52 B25 A, N52 B25 BF - онлайн магазин

BMW
Пазарувай онлайн 24/7
BMW Z4 Cabrio E89
BMW Z4 Cabrio E89
204 к.с - бензин
03.2009 - 08.2011
Марка: BMW Модел: Z4 Cabrio E89 Модиф.: sDrive 23 i - бензин
Шаси: кабриолет Година: 03.2009 - 08.2011 Задвижване: задно
Цил./Куб.: 6 цил. / 2497 куб. см. Мощност: 204 к.с / 150 kW Kод двигател: N52 B25 A, N52 B25 BF Управление: Ангренажна верига Моторно масло: 6,50 литра с филтър Моторно масло за с допълнителен маслен радиатор: 7,00 литра с филтър Вискозитет: 0W-30, 0W-40, 5W-30, 5W-40 Спецификация: BMW Longlife-04 Спецификация: BMW Longlife-01 Спецификация: BMW Longlife-01 FE Антифриз: 8,20 литра
Гараж+Информация
Филтри0
Сортиране
Продукти:
    Филтри2ИзчистиПриложи
    Сортиране
    • Най-евтини
    • Най-продавани
    • Най-скъпи
    Производител
    • Garrett
    • TiAL Products
    • TiAL Sport
    • Turbosmart
    Приложи
    • Garrett GVW external Wastegate Kit Garrett 2100589.4 BMW Z4 Cabrio E89 sDrive 23 i
      Информация:

      External Wastegate Kit by Garrett GVW

      The latest external wastegates from Garrett. From the engineers who also designed the G-Series and GTX Gen II turbochargers.

      Valve body is cast from high temperature stainless steel and designed for exhaust temperatures up to 1050°C.
      CFD optimized for maximum flow and thermal efficiency.
      Our Nomex-reinforced elastomer diaphragm provides exceptional durability and fatigue resistance.
      GVW wastegates are set at 1 bar (14.5 PSI) base pressure and can be configured from 0.2 bar (2.9 PSI) to 1.7 bar (24.7 PSI) (allowing for a 1:1 back pressure).

      Actuator design allows for multiple air/fluid port orientations.

      Features:

      • Available in three sizes: 40mm, 45mm, 50mm
      • four color combinations: Red, Blue, Black, Silver
      • CFD tested for maximum flow and thermal efficiency
      • Optimized actuation stability and temperature resistance for superior durability
      • Replaceable valve and bushing components to extend service life
      • Rugged design for easy diaphragm replacement
      • Liquid-cooled actuator ports for use in demanding applications (up to 52% reduction in body temperature)
      • Anodized aluminum actuator cover

      All mounting hardware, springs, fittings, V-bands, clamps and flanges included.

      753 лв. цена с ДДС
    • Гейтове за турбо TiAL F38 (38mm) 0,9bar TiAL Products 002909 BMW Z4 Cabrio E89 sDrive 23 i
      Model:
      Wastegate
      Color:
      blue
      Boost pressure:
      0,9bar
      Wastegate:
      TiAL F38
      Доставка:
      5 работни дни
      Wastegate TiAL F38 (38mm)Color: blueBoost pressure: 0,9bar The classic 2 bolt flange wastegate. We first produced the F38 back in 2001 and it's still going strong today. This wastegate has a 38mm valve - same as the MV-S, and its body is about an inch taller. - High temp NiCrFe based alloy is used for valve and 347SS valve housing will offer longer product life compared to competing designs. - High temperature silicone Nomex reinforced actuator diaphragm. - 17-7 PH Stainless Steel actuator spring gives consistent pressure at high temperature, resist "relaxing" at temperature to 900F (483C). - Nitronic 60 Stainless Steel is used for the valve seat, and valve bushing. - All Stainless Steel hardware. - Mating weld flanges are 304L or 1018 - Color anodized aluminum actuator (Silver, Red, Blue, Purple, Black). If the wastegate is availble only with an other color or boost pressure, please contact us. We may can change the spring.
      842 лв. цена с ДДС
    • Гейтове за турбо TiAL F38 (38mm) 0,48-0,5bar TiAL Products 002891 BMW Z4 Cabrio E89 sDrive 23 i
      Model:
      Wastegate
      Color:
      purple
      Boost pressure:
      0,48bar / 0,5bar
      Wastegate:
      TiAL F38
      Доставка:
      5 работни дни
      Wastegate TiAL F38 (38mm)Color: purpleBoost pressure: 0,5bar The classic 2 bolt flange wastegate. We first produced the F38 back in 2001 and it's still going strong today. This wastegate has a 38mm valve - same as the MV-S, and its body is about an inch taller. - High temp NiCrFe based alloy is used for valve and 347SS valve housing will offer longer product life compared to competing designs. - High temperature silicone Nomex reinforced actuator diaphragm. - 17-7 PH Stainless Steel actuator spring gives consistent pressure at high temperature, resist "relaxing" at temperature to 900F (483C). - Nitronic 60 Stainless Steel is used for the valve seat, and valve bushing. - All Stainless Steel hardware. - Mating weld flanges are 304L or 1018 - Color anodized aluminum actuator (Silver, Red, Blue, Purple, Black). If the wastegate is availble only with an other color or boost pressure, please contact us. We may can change the spring.
      842 лв. цена с ДДС
    • Гейтове за турбо TiAL F38 (38mm) 0,9bar TiAL Products 002911 BMW Z4 Cabrio E89 sDrive 23 i
      Model:
      Wastegate
      Color:
      purple
      Boost pressure:
      0,9bar
      Wastegate:
      TiAL F38
      Доставка:
      5 работни дни
      Wastegate TiAL F38 (38mm)Color: purpleBoost pressure: 0,9bar The classic 2 bolt flange wastegate. We first produced the F38 back in 2001 and it's still going strong today. This wastegate has a 38mm valve - same as the MV-S, and its body is about an inch taller. - High temp NiCrFe based alloy is used for valve and 347SS valve housing will offer longer product life compared to competing designs. - High temperature silicone Nomex reinforced actuator diaphragm. - 17-7 PH Stainless Steel actuator spring gives consistent pressure at high temperature, resist "relaxing" at temperature to 900F (483C). - Nitronic 60 Stainless Steel is used for the valve seat, and valve bushing. - All Stainless Steel hardware. - Mating weld flanges are 304L or 1018 - Color anodized aluminum actuator (Silver, Red, Blue, Purple, Black). If the wastegate is availble only with an other color or boost pressure, please contact us. We may can change the spring.
      842 лв. цена с ДДС
    • Tial 38mm external Wastegate (F38) TiAL Sport tial-f38.25 BMW Z4 Cabrio E89 sDrive 23 i
      Информация:

      "TIAL F38 external Wastegate for Turbo engines on a low cost basis made in USA. Suitable for engines up to 500hp.


      347 Stainless Steel Alloy is used for valve and valve housing.

      High temperature silicone Nomex reinforced actuator diaphragm (membran).

      17-7 PH Stainless Steel actuator spring gives consistent pressure at high temperature, resists "

      851 лв. цена с ДДС
    • Tial 41mm external Wastegate (F41) TiAL Sport tial-f41.2 BMW Z4 Cabrio E89 sDrive 23 i
      Информация:

      TIAL F41 external wastegate suitable for turbo engines up to about 600hp. 

      The F41 Tial Wastegate has a valve with a 41mm diameter. 

      Both the housing and the valve are made of 347SS stainless steel to withstand the highest temperatures. 

      The inner diaphragm is made of temperature resistant Nomex and is additionally reinforced. 

      Tial uses a very high quality stainless steel spring to ensure a constant spring rate over the entire temperature range. 

      For the valve seat and valve guide, TIAL uses Nitronic 60 stainless steel. 

      Included in delivery: 

      • F41 Wastegate original 
      • TIAL F41 valve seat ring Nitronic 60 
      • 8x TiAL stainless steel cover screws 
      • 8x TiAL stainless steel washers 
      • 2x TiAL air connector

      988 лв. цена с ДДС
    • Tial MV-R 44mm external Wastegate water cooled TiAL Sport tial-mv-r.1 BMW Z4 Cabrio E89 sDrive 23 i
      Информация:

      "TIAL MV-R external Wastegate for Turbo engines on a low cost basis made in USA. Suitable for engines up to 600hp.

      Watercooled version with Dash 4 connections.
      Water cooling ports that cycle a small amount of coolant through the actuator top to keep the temperatures down in extreme conditions such as road racing. These are leak tested after installation from the factory and can be removed if not needed.

      347 Stainless Steel Alloy is used for valve and valve housing.

      High temperature silicone Nomex reinforced actuator diaphragm (membran).

      17-7 PH Stainless Steel actuator spring gives consistent pressure at high temperature, resists "

      1215 лв. цена с ДДС
    • Tial MV-S 38mm external Wastegate water cooled TiAL Sport tial-mvs-38 BMW Z4 Cabrio E89 sDrive 23 i
      Информация:

      "TIAL MV-S external Wastegate for Turbo engines on a low cost basis made in USA. Suitable for engines up to 600hp.

      Watercooled version with Dash 4 connections.
      Water cooling ports that cycle a small amount of coolant through the actuator top to keep the temperatures down in extreme conditions such as road racing. These are leak tested after installation from the factory and can be removed if not needed.

      347 Stainless Steel Alloy is used for valve and valve housing.

      High temperature silicone Nomex reinforced actuator diaphragm (membran).

      17-7 PH Stainless Steel actuator spring gives consistent pressure at high temperature, resists "

      Spring for 0,3 to 1,7 bar boost.

      1029 лв. цена с ДДС
    • Wastegate Diaphragm for TiAL MV-R TiAL Sport 2100274 BMW Z4 Cabrio E89 sDrive 23 i
      Информация:

      For 44mm TiAL MVR Wastegates

      In rare cases it happens that a Wastegate diaphragm is damaged or ruptures, for example due to excessive temperature loads. Here a relatively simple exchange is possible.
      New and original as a replacement

      206 лв. цена с ДДС
    • Wastegate Diaphragm for TiAL MV-S TiAL Sport 2100278 BMW Z4 Cabrio E89 sDrive 23 i
      Информация:

      For 38mm TiAL MVS / V38 wastegates

      In rare cases it happens that a Wastegate diaphragm is damaged or ruptures, for example due to excessive temperature loads. Here a relatively simple exchange is possible.

      New and original as a replacement.

      186 лв. цена с ДДС
    • 2 or 4-cylinder flange ALV40 Gen-V Anti-Lag valve Turbosmart TS-0550-3100 BMW Z4 Cabrio E89 sDrive 23 i
      Model:
      single flange
      Material:
      Stainless Steel
      Product Type:
      Wastegate flange
      Доставка:
      5 работни дни
      2 or 4-cylinder flange ALV40 Gen-V Anti-Lag valveALV40 Gen-V Anti-Lag exhaust flange for 2 or 4-cylinder enginesOutlet weld-on flange for Turbosmart ALV40 GEN 5 Anti-Lag WastegateStainless steel outlet welding adapter for 2 or 4-cylinder engines, suitable for the Turbosmart ALV40 Gen-V Anti-Lag Wastegate.Tech facts about Anti Lag:The wastegate requires the excess charge air (when the throttlebody is closed) to be directed into the manifold via the ALV40 Anti-Lag valve. There it is then ignited by ECU programmed fuel injection. Thus the exhaust gas pressure is maintained and the turbine wheel in the turbocharger is kept at speed, so there is no turbo lag during and after a gear change. This technology comes from the WRC and has been used for 40 years.A similar principle is used for the deactivated drive in coast, in this mode fuel injection continues and the ignition is programmed to "late". This means that the mixture ignites only in the exhaust manifold and the familiar"Bank Bang"occurs. This principle is however in the long run very harmful for the engine and should only be used in racing events. Note: Suitable for 2 or 4-cylinder enginesMaterial: stainless steel
      150 лв. цена с ДДС
    • 4 or 8-cylinder flange ALV40 Gen-V Anti-Lag WG Turbosmart TS-0550-3098 BMW Z4 Cabrio E89 sDrive 23 i
      Model:
      single flange
      Material:
      Stainless Steel
      Product Type:
      Wastegate flange
      Доставка:
      5 работни дни
      4 or 8-cylinder flange ALV40 Gen-V Anti-Lag WGALV40 Gen-V Anti-Lag exhaust flange for 4 or 8-cylinder enginesOutlet weld-on flange for Turbosmart ALV40 GEN 5 Anti-Lag WastegateStainless steel outlet welding adapter for 4 or 8-cylinder engines, suitable for the Turbosmart ALV40 Gen-V Anti-Lag Wastegate.Tech facts about Anti Lag:The wastegate requires the excess charge air (when the throttle body is closed) to be directed into the manifold via the ALV40 Anti-Lag valve. There it is then ignited by ECU programmed fuel injection. Thus the exhaust gas pressure is maintained and the turbine wheel in the turbocharger is kept at speed, so there is no turbo lag during and after a gear change. This technology comes from the WRC and has been used for 40 years.A similar principle is used for the deactivated drive in coast, in this mode fuel injection continues and the ignition is programmed to "late". This means that the mixture ignites only in the exhaust manifold and the familiar "Bank Bang" occurs. This principle is however in the long run very harmful for the engine and should only be used in racing events. Note: Suitable for 4 or 8-cylinder enginesMaterial: stainless steel
      150 лв. цена с ДДС
    • ALV40 aluminium inlet weld on flange Turbosmart TS-0550-3101 BMW Z4 Cabrio E89 sDrive 23 i
      Model:
      single flange
      Material:
      Aluminium
      Product Type:
      Wastegate flange
      Доставка:
      5 работни дни
      ALV40 aluminium inlet weld on flangeInlet weld on flange made of Aluminium for Turbosmart ALV40 Gen-V Anti-Lag valveAluminium Inlet adapter 44,5 mm to connect the Turbosmart anti-lag GEN 5 valve with a boost pipeThis flange is welded to the intercooler pipe, it is the counterpart of the adapter flange (TS-0550-3103, TS-0550-3102) which is screwed to the ALV40 inlet. The two flanges are connected with a V-band clamp.Tech facts about Anti Lag:The wastegate requires the excess charge air (when the throttle body is closed) to be directed into the manifold via the ALV40 Anti-Lag valve. There it is then ignited by ECU programmed fuel injection. Thus the exhaust gas pressure is maintained and the turbine wheel in the turbocharger is kept at speed, so there is no turbo lag during and after a gear change. This technology comes from the WRC and has been used for 40 years.A similar principle is used for the deactivated drive in coast, in this mode fuel injection continues and the ignition is programmed to "late". This means that the mixture ignites only in the exhaust manifold and the familiar "Bank Bang" occurs. This principle is however in the long run very harmful for the engine and should only be used in racing events. Note: Suitable with ALV40 Gen-V Anti-Lag Valve inlet adapters (TS-0550-3103, TS-0550-3102)Material: Aluminium
      114 лв. цена с ДДС
    • Inlet flange 44,5 mm for ALV40 Gen-V Anti-Lag valve Turbosmart TS-0550-3102 BMW Z4 Cabrio E89 sDrive 23 i
      Diameter:
      44 mm
      Model:
      single flange
      Material:
      Aluminium
      Product Type:
      Wastegate flange
      Доставка:
      5 работни дни
      Inlet flange 44,5 mm for ALV40 Gen-V Anti-Lag valveTurbosmart ALV40 Gen-V Anti-Lag valve inlet flange made of AluminiumAluminium Inlet adapter 44,5 mm to connect the Turbosmart anti-lag GEN 5 valve with a boost pipeThis inlet flange is required to connect the inlet of the Turbosmart ALV40 Anti Lag Wastegate to a boost pressure pipe.Tech facts about Anti Lag:The wastegate requires the excess charge air (when the throttle body is closed) to be directed into the manifold via the ALV40 Anti-Lag valve. There it is then ignited by ECU programmed fuel injection. Thus the exhaust gas pressure is maintained and the turbine wheel in the turbocharger is kept at speed, so there is no turbo lag during and after a gear change. This technology comes from the WRC and has been used for 40 years.A similar principle is used for the deactivated drive in coast, in this mode fuel injection continues and the ignition is programmed to "late". This means that the mixture ignites only in the exhaust manifold and the familiar "Bank Bang" occurs. This principle is however in the long run very harmful for the engine and should only be used in racing events. Fits for: Suitable for ALV40 Gen-V Anti-Lag ValveMaterial: AluminiumConnection diameter: 44,5 mm (1 3/4")
      122 лв. цена с ДДС
    • Inlet flange 38 mm for ALV40 Gen-V Anti-Lag valve Turbosmart TS-0550-3103 BMW Z4 Cabrio E89 sDrive 23 i
      Model:
      single flange
      Diameter:
      38 mm
      Material:
      Aluminium
      Product Type:
      Wastegate flange
      Доставка:
      5 работни дни
      Inlet flange 38 mm for ALV40 Gen-V Anti-Lag valveTurbosmart ALV40 Gen-V Anti-Lag valve inlet flange made of AluminiumAluminium Inlet adapter 38 mm to connect the Turbosmart anti-lag GEN 5 valve with a boost pipeThis inlet flange is required to connect the inlet of the Turbosmart ALV40 Anti Lag Wastegate to a boost pressure pipe.Tech facts about Anti Lag: The wastegate requires the excess charge air (when the throttle body is closed) to be directed into the manifold via the ALV40 Anti-Lag valve. There it is then ignited by ECU programmed fuel injection. Thus the exhaust gas pressure is maintained and the turbine wheel in the turbocharger is kept at speed, so there is no turbo lag during and after a gear change. This technology comes from the WRC and has been used for 40 years.A similar principle is used for the deactivated drive in coast, in this mode fuel injection continues and the ignition is programmed to "late". This means that the mixture ignites only in the exhaust manifold and the familiar "Bank Bang" occurs. This principle is however in the long run very harmful for the engine and should only be used in racing events. Fits for: Suitable for ALV40 Gen-V Anti-Lag ValveMaterial: AluminiumConnection diameter: 38 mm (1 1/2")
      122 лв. цена с ДДС
    • Гейтове за турбо E-WG45 120 Psi - 8,3 Bar black Turbosmart TS-0553-1502 BMW Z4 Cabrio E89 sDrive 23 i
      Model:
      Wastegate
      Boost pressure:
      other
      Доставка:
      5 работни дни
      E-WG45 120 Psi / 8,3 Bar blackTurbosmart new 45mm electronic external Wastegateincluded inlet and outlet stainless weld flanges In 2016, Turbosmart rolled out the Gen-V External wastegate range and one of the key benefits of this design is the modular architecture; allowing a rotatable diaphragm housing, optional water cooling and the ability to swap actuators housings between gate sizes, ensuring Turbosmart had a gate, for every customer need, no matter the size, or control requirements. Turbosmart’s e-WG45 and e-WG60 give you all the flow & interchangeability of Turbosmart’s Gen-V range of External wastegates, with the kind of control never seen before, independent of any reference signal, without the need for compressed gas or boost hoses and is fully adjustable from your tuning interface, no need for changing springs: Boost control is completely adjustable from your laptop. Mechanically actuated wastegates are truly tried & tested over the years. The Gen-V range particularly has proven itself in the harshest of environments & continues to set world records and claim fans with their reliability and performance. As boost control strategies become more and more complex however, Turbosmart went back to the drawing board for a solution that maintains all the performance & reliability of the Gen-V range and adds truly infinite control. Supplied with: Inlet and outlet stainless weld flanges, inlet and outlet V-Band clamps and valve seat. Valve Sizer: 45mm Color: black Spring: Not necessary, WG is electronically controlled Will an e-WG fit my existing manifold? Yes. The Turbosmart e-WG range works with the modular housings of the Gen-V products, so wherever your Turbosmart Gen-V products are fitted, the e-WG will bolt on as they use the same mounting & flange orientation. The Actuator housings of the new e-WG range are different though, so you’ll need to make sure there is room for the new design in your engine bay. How fast is the e-WG range? 21mm per second - Full travel can be achieved in 600ms. Fast. What spring options does the e-WG range have? Just the one option: None. The Turbosmart e-WG is fully adjustable without the need for springs. It can actuate boost against extreme levels of backpressure and does so without any springs. Nothing to change, ever. It also features a special ‘zero-backdrive’ to further bolster its ability against high drive pressures. How many wires does the e-WG have? The Turbosmart e-WG has 5 wires, 2 for motor control and 3 for the onboard position sensor. Can I use an e-WG instead of my Compressed Gas (co2) setup? Yes you can - In fact, it's one of the situations that the e-WG would be ideal for. You will not need the external compressed gas tank, the lines or the solenoid - You just need the e-WG. What do I need to control it? You will need a programmable ECU (Engine Control Unit). You will need a ‘high current’ (20amp) output and a spare analogue input to make it work. Most quality ECU’s have the capability to drive the gate for accurate boost control. Best speak to your specialist, or calibrator about your needs if you have any questions on what is needed.
      2159 лв. цена с ДДС
    • Гейтове за турбо E-WG60 80 Psi - 5,5 Bar black Turbosmart TS-0555-1502 BMW Z4 Cabrio E89 sDrive 23 i
      Model:
      Wastegate
      Boost pressure:
      other
      Доставка:
      5 работни дни
      E-WG60 80 Psi / 5,5 Bar blackTurbosmart new 60mm electronic external Wastegateincluded inlet and outlet stainless weld flanges In 2016, Turbosmart rolled out the Gen-V External wastegate range and one of the key benefits of this design is the modular architecture; allowing a rotatable diaphragm housing, optional water cooling and the ability to swap actuators housings between gate sizes, ensuring Turbosmart had a gate, for every customer need, no matter the size, or control requirements. Turbosmart’s e-WG45 and e-WG60 give you all the flow & interchangeability of Turbosmart’s Gen-V range of External wastegates, with the kind of control never seen before, independent of any reference signal, without the need for compressed gas or boost hoses and is fully adjustable from your tuning interface, no need for changing springs: Boost control is completely adjustable from your laptop. Mechanically actuated wastegates are truly tried & tested over the years. The Gen-V range particularly has proven itself in the harshest of environments & continues to set world records and claim fans with their reliability and performance. As boost control strategies become more and more complex however, Turbosmart went back to the drawing board for a solution that maintains all the performance & reliability of the Gen-V range and adds truly infinite control. Supplied with: Inlet and outlet stainless weld flanges, inlet and outlet V-Band clamps and valve seat. Color: black Spring: Not necessary, WG is electronically controlled Will an e-WG fit my existing manifold? Yes. The Turbosmart e-WG range works with the modular housings of the Gen-V products, so wherever your Turbosmart Gen-V products are fitted, the e-WG will bolt on as they use the same mounting & flange orientation. The Actuator housings of the new e-WG range are different though, so you’ll need to make sure there is room for the new design in your engine bay. How fast is the e-WG range? 21mm per second - Full travel can be achieved in 600ms. Fast. What spring options does the e-WG range have? Just the one option: None. The Turbosmart e-WG is fully adjustable without the need for springs. It can actuate boost against extreme levels of backpressure and does so without any springs. Nothing to change, ever. It also features a special ‘zero-backdrive’ to further bolster its ability against high drive pressures. How many wires does the e-WG have? The Turbosmart e-WG has 5 wires, 2 for motor control and 3 for the onboard position sensor. Can I use an e-WG instead of my Compressed Gas (co2) setup? Yes you can - In fact, it's one of the situations that the e-WG would be ideal for. You will not need the external compressed gas tank, the lines or the solenoid - You just need the e-WG. What do I need to control it? You will need a programmable ECU (Engine Control Unit). You will need a ‘high current’ (20amp) output and a spare analogue input to make it work. Most quality ECU’s have the capability to drive the gate for accurate boost control. Best speak to your specialist, or calibrator about your needs if you have any questions on what is needed.
      2932 лв. цена с ДДС
    • GenV Comp-Gate WG40 Blue 14 PSI - 1 bar Turbosmart TS-0552-1011 BMW Z4 Cabrio E89 sDrive 23 i
      Wastegate:
      Turbosmart
      Color:
      blue
      Boost pressure:
      0,96bar / 1bar
      Доставка:
      5 работни дни
      GenV Comp-Gate WG40 Blue 14 PSI / 1 barGen 5 WG40 external Wastegate with 40 mm valveGeneration 5 WG40 Wastegate includes inlet and outlet welding adapters The GenV WG40 CompGate60 External Wastegate is a Motorsport proven, cost effective external wastegate. The GenV provides extensive user configurability, world leading extended thermal performance, fatigue resistance and best in class flow performance for optimum control and longevity. The GenV External Wastegate from Turbosmart was a ground up rework of a classic and the only feature that rolled over from the Gen4 range was the mounting orientation. CFD optimized and validated in-house for maximum flow and thermal management, the GenV range has more features, options and performance than any other gate like it. A direct fit upgrade to all Gen4 Turbosmart wastegates and feature our unique collar-locking system, variable actuator cap and base for easy, 360 degree optional routing of reference hoses, strap-type V-band clamps, optional liquid-cooling provision, 1/8" NPT reference ports and are provided with the full range of available springs. Color: Blue Spring force: 14 Psi / 1 Bar Optional vailable: - Also available In black, blue, red and purple - Optional Wastegate position sensor version & upgrade - Compressed Gas (ex: Co2) Version - eWG (Electronically Actuated) Version Features:Class leading, thermal performanceClass leading, CFD & bench validated flow performanceClass leading fatigue resistanceNitronic 60 valve guide & high temp 347 SS body17/7 PH stainless steel springsLiquid actuator cooling optionStrap type V-Band clampsUser adjustable actuator positionModular design for actuator interchangeability Supplied with:GenV Wastegate unitAll springs included in boxWastegate pre-fitted as per descriptionGenV SS316 valve seatGenV inlet & outlet V-Band clampsGenV inlet & outlet flangesMounting bolts and nutsCollar tool (master/slave)4 x 1/8” NPT plugs (1x installed)2 x 1/8” NPT nipplesTurbosmart decal
      853 лв. цена с ДДС
    • GenV Comp-Gate WG40 Black 14 PSI - 1 bar Turbosmart TS-0552-1012 BMW Z4 Cabrio E89 sDrive 23 i
      Wastegate:
      Turbosmart
      Color:
      black
      Boost pressure:
      0,96bar / 1bar
      Доставка:
      5 работни дни
      GenV Comp-Gate WG40 Black 14 PSI / 1 barGen 5 WG40 external Wastegate with 40 mm valveGeneration 5 WG40 Wastegate includes inlet and outlet welding adapters The GenV WG40 CompGate60 External Wastegate is a Motorsport proven, cost effective external wastegate. The GenV provides extensive user configurability, world leading extended thermal performance, fatigue resistance and best in class flow performance for optimum control and longevity. The GenV External Wastegate from Turbosmart was a ground up rework of a classic and the only feature that rolled over from the Gen4 range was the mounting orientation. CFD optimized and validated in-house for maximum flow and thermal management, the GenV range has more features, options and performance than any other gate like it. A direct fit upgrade to all Gen4 Turbosmart wastegates and feature our unique collar-locking system, variable actuator cap and base for easy, 360 degree optional routing of reference hoses, strap-type V-band clamps, optional liquid-cooling provision, 1/8" NPT reference ports and are provided with the full range of available springs. Color: Black Spring force: 14 Psi / 1 Bar Optional vailable: - Also available In black, blue, red and purple - Optional Wastegate position sensor version & upgrade - Compressed Gas (ex: Co2) Version - eWG (Electronically Actuated) Version Features:Class leading, thermal performanceClass leading, CFD & bench validated flow performanceClass leading fatigue resistanceNitronic 60 valve guide & high temp 347 SS body17/7 PH stainless steel springsLiquid actuator cooling optionStrap type V-Band clampsUser adjustable actuator positionModular design for actuator interchangeability Supplied with:GenV Wastegate unitAll springs included in boxWastegate pre-fitted as per descriptionGenV SS316 valve seatGenV inlet & outlet V-Band clampsGenV inlet & outlet flangesMounting bolts and nutsCollar tool (master/slave)4 x 1/8” NPT plugs (1x installed)2 x 1/8” NPT nipplesTurbosmart decal
      902 лв. цена с ДДС
    • WG40 Compgate 40mm - 14 PSI - 1 bar Blue Turbosmart TS-0505-1009 BMW Z4 Cabrio E89 sDrive 23 i
      Доставка:
      5 работни дни
      WG40 Compgate 40mm - 14 PSI / 1 bar Blue40mm External WastegateIncluded Inlet and Outlet Stainless Weld Flanges Turbosmart’s 40mm external wastegate was designed to fit into tight engine bays while still offering superior flow and heat handling capabilities. The revolutionary new actuator housing is 25% smaller than our current range and allows for easy spring changes and gives the ability to index the cap orientation in 12 different positions. Supplied with: Inlet and Outlet Stainless Weld Flanges, Inlet and Outlet V-Band Clamps, 1/16 NPT Hose Barbs (5mm), 1/16 NPT Port Blanking Plugs, Locking Collar Tool, Valve Seat, Brown/Purple 7psi Middle Spring and Brown/Pink 7psi Outer Spring (installed). Color: Blue Spring force: 14PSI / 1 bar
      821 лв. цена с ДДС
    • Turbosmart Blow Off Valve Compact Dual Port Ford Focus RS 2016 2.3L Ecoboost Turbosmart 2100707 BMW Z4 Cabrio E89 sDrive 23 i
      Информация:

      The Turbosmart Kompact Shortie VR08 fits your 2016 Ford Focus RS. This easy to install replacement for the prone OEM plastic blow off valve offers improved turbo response. 

      The dual port valve is a 50-50 recirculation/atmospheric valve for the classic vent-atmospheric sound at high charge pressure and quiet operation at low charge pressure. 

      The Kompact Shortie Blow-Off Valve for the Focus RS was designed with the high charge pressure of the Focus in mind for improved performance and durability. Plastic OEM blow-off valves like those in the RS have a history of failure - They leak and become porous and brittle over time, eventually breaking and causing serious problems. With a charge pressure of around 23 PSI in stock form, the Focus is already pushing the limits of the standard plastic blow off valve - and there's not much room to increase the charge pressure before the standard valve gives up. 

      The Kompact Shortie from Turbosmart is made of billet aluminum, not plastic. Its brass piston is strong and lightweight, and each BOV is individually matched with the correct piston to ensure the best fit, which in turn means no O-ring is needed to seal the housing from the piston. This gives the shortie unmatched durability and responsiveness, and requires less maintenance than aftermarket BOVs that use o-rings to seal the piston. 

      The Kompact Shortie for the Focus RS can be used in Dual Port and Plumb Back versions. The Plumb Back is a fully recirculating blow off valve that offers similar volume to the standard valve, so you can have all the performance of a Turbosmart blow off valve while flying under the radar. The dual port valve provides split operation between recirculation and venting to the environment, resulting in quiet operation at low charge pressure and mind blowing venting noise at high charge pressure - a great addition to the rally character of the Focus. The Kompact Shortie for the Focus RS features enlarged orifices compared to previous shorties, giving the RS the flow it needs. 

      These direct replacement blow off valves provide an easy performance upgrade without the need for custom fabrication or special tools. It's another addition to Turbosmart's ever-growing lineup of parts for Ford's newest EcoBoost vehicle lineup.

      519 лв. цена с ДДС
    • Turbosmart Blow Off Valve Compact EM Plumb Back VR18 Turbosmart 2100703 BMW Z4 Cabrio E89 sDrive 23 i
      Информация:

      The award-winning Kompact EM series of retrofit blow-off valves is the world's first true plug-and-playupgrade solution for your factory recirculation valve. Remove the connector and unscrew your OEM valve, and use the Kompact EM valve in its place. No adapters, hoses or additional mounting are required.

      The Kompact EM valve series from Turbosmart uses motorsports proven billet valve technology and adds a patented solenoid system and internal pressure control channels for a simple plug and play valve with full OE integration and control. There are no reference hoses, no separate solenoids, and no complicated parts - just bolt it on and plug it in!

      You can count on unmatched performance and reliability as a direct replacement for your factory recirculation valve. The Kompact EM valves avoid the common failures associated with plastic factory valves with the boost balance valve design (the more charge you have, the better it seals), positive seal o-ring on the piston face, and billet construction. Regardless of your application, the Compact EM Series will hold more charge pressure and respond better in any environment.

      Features

      • Boost balance valve technology
      • Patented integrated pressure control
      • True plug & play upgrade
      • Integrated patented high temperature solenoid valve
      • Billet design with high temperature O-rings
      • Installation Available as plumback or dual port options

      Suitable for newer VAG vehicles such as the Mk8 Golf GTI, Audi S4 and Audi SQ5!

      538 лв. цена с ДДС
    • Turbosmart BOV Compact EM Plumb Back VR2 Turbosmart 2100638 BMW Z4 Cabrio E89 sDrive 23 i
      Информация:

      The award-winning Kompact EM series of retrofit bypass valves is the world's first true plug-and-playupgrade solution for your factory bypass valve. Unplug your OEM valve and install a Kompact EM valve in its place. No adapters, hoses or additional components are required.

      The Kompact EM valve series from Turbosmart uses motorsports proven billet valve technology and adds a proprietary solenoid system and internal pressure control channels for a simple plug and play valve with full OE integration and control. There are no connecting hoses, no separate solenoids, and no complicated parts - just bolt it on and plug it in!

      You can count on unmatched performance and reliability as a direct replacement for your factory bypass valve. The Kompact EM valves overcome the common failures with plastic factory valves through our boost balance valve design (The more charge you have, the better it seals), o-ring with positive seal on piston face and billet construction. Regardless of your application, the Compact EM Series will hold more charge pressure and be more responsive in every way.

      Features

      • Boost balance valve technology
      • Patented integrated pressure control
      • True plug-and-play upgrade
      • Integrated proprietary high temperature solenoid valve
      • Billet design with high temperature O-rings
      • Can be installed in plumback or dual port versions
      538 лв. цена с ДДС
    • Turbosmart BOV Compact Shortie Plumb Back Ford Fiesta 1.6L EcoBoost Turbosmart 21fo082 BMW Z4 Cabrio E89 sDrive 23 i
      Информация:

      This little blow-off valve may look small, but it's anything but a flyweight in terms of performance. With its billet aluminum construction and lightweight, two-piece brass/aluminumpiston, perfectly matched to the precision-machined springs, the shortie valve offers razor-sharp response to the charge pressure and significantly better boost pressure handling of up to 30 PSI. The Plumb Back is a fully recirculating BOV, so its operation is quiet and will not draw unwanted attention. It blends seamlessly with the vehicle's stock mapping, making it perfect for drivers who want to get great performance out of their ST while staying under the radar.

      Like the Dual Port, the Plumb Back Shortie directly replaces the Fiesta's stock plastic blow off valve, which can leak and break, especially at elevated charge pressure. The shortie is a far more robust replacement and bolts directly to Ford's turbo compressor cover, allowing you to boost your Fiesta's performance without costly custom fabrications.

      538 лв. цена с ДДС
    • Turbosmart charge pressure Reference Adapter Ford Fiesta EcoBoost Turbosmart 2100704 BMW Z4 Cabrio E89 sDrive 23 i
      Информация:

      Boost Reference Adapter - Fits Ford Fiesta ST EcoBoost

      Boost Reference Adapters (BRAs) from Turbosmart provide access to reliable boost pressure control without interfering with the operation of the vehicle's stock sensors and control systems.

      186 лв. цена с ДДС
    • Turbosmart Gen4 IWG WG38/40/45/50L 5PSI Spring Blow Off Turbosmart 2100640 BMW Z4 Cabrio E89 sDrive 23 i
      Информация:
      Turbosmarts springs are designed to work with our Plumb Back, Dual Port and Supersonic blow off valves. They offer a wide range of spring rates to suit your riding style and application. Manufactured from high quality materials, Turbosmarts springs are designed to maintain peak performance of your blow-off valve in the most extreme conditions. Choose from our selection of Turbosmart springs to get the perfect fit for your car and the best performance from your blow-off valve.
      139 лв. цена с ДДС
    • Turbosmart Gen4 WG38/40/45/50L 10PSI outer spring - Brown / Blue Turbosmart 2100705 BMW Z4 Cabrio E89 sDrive 23 i
      Информация:

      Spring - Fits Turbosmart Ultra-Gate38 (38mm), Comp-Gate40 (40mm), Hyper-Gate45 (45mm) external wastegates and internal Wastegate actuators (IWG-75).

      147 лв. цена с ДДС
    • Turbosmart Gen4 WG38/40/45/50L 11PSI medium spring - Brown / Red Turbosmart 2100706 BMW Z4 Cabrio E89 sDrive 23 i
      Информация:

      Spring - Fits Turbosmart Ultra-Gate38 (38mm), Comp-Gate40 (40mm), Hyper-Gate45 (45mm) external wastegates and internal Wastegate actuators (IWG-75).

      147 лв. цена с ДДС
    • Turbosmart GenV IWG BorgWarner EFR Twin Port 14psi Turbosmart 2100708 BMW Z4 Cabrio E89 sDrive 23 i
      Информация:

      Turbosmart GenV Twin Port Internal Wastegate Actuator to fit Borg Warner EFR Series Turbochargers. This IWG actuator has all the technology of the award winning GenV series external wastegates and offers unparalleled actuator performance.

      The Turbosmart GenV IWG (Internal Wastegate Actuator) series offers improved boost control over your factory actuator. The large working area of the unique diaphragm system provides improved response and boost control at any power or boost level.

      Turbosmart's locking system also lets you quickly change the base spring selection from 5 to 26 psi. The Nitronic guide and hard-chrome intermediate rod, paired with the swivel joint system, ensure the best possible lower chamber seal for true twin-scroll control, unmatched actuation ranges and control.

      Features 

      • GenV cap with 1/8NPT ports
      • True Twin Port Control for a wide boost control window
      • Hard-chrome plated intermediate rod and Nitronic guide for cycle-tested and proven reliability
      • Proprietary swivel linkage for full linear actuation
      • 3 secondary rods included to ensure installation in all B1 & B2 single & twin scroll EFR's

      This is an aftermarket solution for Borg Warner EFR series turbochargers, including B1 and B2 single and twin scroll turbochargers. Accessories are supplied to fit all variants, including all spring options.

      617 лв. цена с ДДС
    • Turbosmart GenV WG60 PowerGate60 14psi Black Turbosmart 2100632.3 BMW Z4 Cabrio E89 sDrive 23 i
      Информация:

      The GenV WG60 PowerGate60 External Wastegate is a motorsports proven, cost effective external Wastegate - the largest in the Turbosmart GenV range and the Wastegate with the highest flow in the world.

      The GenV offers extensive user configuration options, world-beating increased thermal performance, fatigue resistance and best-in-class flow for optimal control and longevity.

      The GenV External Wastegate from Turbosmart was a major redesign of the classic and the only feature carried over from the Gen4 series was the mounting position. CFD optimized and internally tested for maximum flow and thermal management, the GenV series offers more features, options and performance than any other gate of its kind.

      They are a direct upgrade to all Gen4 Turbosmart wastegates and feature our unique closure system, variable actuator and base for easy optional 360 degree routing of connecting wires, V-band clamps, optional liquid cooling, 1/8″ NPT connection and are equipped with the full range of available springs.

      Features 

      • Leading in class, thermal performance
      • Leading in class, CFD and tested flow ratings
      • Class leading wear resistance
      • Nitronic 60 valve guide & high temperature 347 stainless steel body
      • 17/7 PH stainless steel springs
      • Actuator liquid cooling option
      • V-belt clamps with belt
      • Custom actuator position adjustment
      • Modular design for interchangeable actuators
      1477 лв. цена с ДДС
    • Turbosmart IWG75 Ford Focus ST / XR5 2.5L Turbo 7 PSI Pressure Can Turbosmart 2100631 BMW Z4 Cabrio E89 sDrive 23 i
      Информация:

      The Turbosmart Upgraded Wastegate Actuators are designed to provide the maximum possible boost response for your factory standard turbocharger. The Turbosmart IWG75 series of upgraded actuators benefit from greater efficiency than the factory design, resulting in improved response to the charge pressure throughout the RPM range.

      This improved efficiency level is achieved by increasing the effective diaphragm area and revising the built-in springs, resulting in greater power transfer to the actuator (boost and back pressure) while still maintaining very high responsiveness.

      When operating at the same base pressure as from the factory, you can expect a more extensive charge pressure- and torque curve as peak boost pressure is reached earlier in the RPM range and held longer, all the way up to higher RPMs. These improvements can be amplified with higher base pressures, but tuning and recalibration will likely be required.

      Features 

      • Proprietary silicon Nomex diaphragm
      • Choice of springs from 3psi to 26psi (optional)
      • High quality billet aluminum construction
      • Stainless steel rods and clevises
      • Unique Turbosmart closure system
      499 лв. цена с ДДС
    • Turbosmart IWG75 Universal Actuator (UNF) 150mm 14PSI Turbosmart 2100637 BMW Z4 Cabrio E89 sDrive 23 i
      Информация:

      The Turbosmart Wastegate actuators are designed to provide the best possible response to the charge pressure for your factory turbocharger. The Turbosmart IWG75 series of upgraded actuators benefit from an increased "work ratio" over stock equipment, resulting in improved boost response throughout the RPM range.

      This improved efficiency is achieved by increasing the effective diaphragm area and revising the built-in springs, resulting in greater leverage of the forces the actuator opposes (boost and backpressure) while remaining very responsive.

      If you upgrade with the same base pressure as from the factory, you can expect a wider charge pressure- and torque curve, as peak boost pressure is reached earlier in the revs and held longer, up to higher rpm. These benefits can be enhanced with higher boost pressures, but tuning and retuning will most likely be required.

      Features

      • Self-developed silicon Nomex diaphragm
      • Optional springs from 3psi to 26psi (optional)
      • High quality billet aluminum construction
      • Stainless steel linkage and clevis pins
      • Unique Turbosmart closure system
      382 лв. цена с ДДС
    • Turbosmart IWG75 Universal Pressure Box M6 140mm Rod 10PSI Turbosmart 2100630 BMW Z4 Cabrio E89 sDrive 23 i
      Информация:

      The Turbosmart Upgraded Wastegate Actuators are designed to provide the maximum possible boost response for your factory standard turbocharger. The Turbosmart IWG75 series of upgraded actuators benefit from greater efficiency than the factory design, resulting in improved response to the charge pressure throughout the RPM range.

      This improved efficiency level is achieved by increasing the effective diaphragm area and revising the built-in springs, resulting in greater power transfer to the actuator (boost and back pressure) while still maintaining very high responsiveness.

      When operating at the same base pressure as from the factory, you can expect a more extensive charge pressure- and torque curve as peak boost pressure is reached earlier in the RPM range and held longer, all the way up to higher RPMs. These improvements can be amplified with higher base pressures, but tuning and recalibration will likely be required.

      Features 

      • Proprietary silicon Nomex diaphragm
      • Choice of springs from 3psi to 26psi (optional)
      • High quality billet aluminum construction
      • Stainless steel rods and clevises
      • Unique Turbosmart closure system
      382 лв. цена с ДДС
    • Turbosmart Wastegate WG40 Gen-V Compgate 40-0-5 Turbosmart 2100439 BMW Z4 Cabrio E89 sDrive 23 i
      Информация:

      Water cooled external Wastegate valve from Turbosmart.

      The valve comes complete with V-band stainless steel flanges for easy installation. The housing is made of anodized aluminum and can be ordered in blue or xblack. The Wastegate can be used with or without water cooling. Due to the compact design, the Wastegate can be installed almost anywhere. The Wastegate lid can be twisted in 12 different positions.

      Features:

      • 40mm V-band flange
      • Complete with flanges and freely configurable
      • Modular configurable actuator
      • 0.5 bar spring pre-installed
      • High temperature resistant
      • Stainless steel valve body
      • 2 different colors
      • Diaphragm made of temperature resistant Nomex silicone
      • 1/8″ NPT control ports
      • 1/8″ NPT water connections
      • Integrated water cooling if needed!
      • Includes spring kit for charge pressures from 0.2 - 1.79 bar

      Included in kit:

      Turbosmart Gen-V Wastegate, valve seat, input V-band, input V-band flange, output V-band, output V-band flange, spring kit, Turbosmart connection kit, adjustment tool

      753 лв. цена с ДДС
    • Turbosmart Wastegate WG40 Gen-V Compgate 40-1 Turbosmart 2100440 BMW Z4 Cabrio E89 sDrive 23 i
      Информация:

      Water-cooled external wastegate valve from Turbosmart.

      The valve comes complete with V-band stainless steel flanges for easy installation. The housing is made of anodized aluminum and can be ordered in blue or black. The Wastegate can be used with or without water cooling. Due to the compact design the Wastegate can be installed almost everywhere. The Wastegate can be turned in 12 different positions.

      Features:

      • 40mm V-Band flange
      • Complete with flanges and freely configurable
      • Modular configurable actuator
      • 1 bar spring pre-installed
      • High temperature resistant
      • Stainless steel valve body
      • 2 different colours
      • Diaphragm made of temperature-resistant Nomex silicone
      • 1/8″ NPT Control ports
      • 1/8″ NPT Water connections
      • Integrated water cooling, if required!
      • Incl. spring kit for charging pressures from 0.2 - 1.79 bar

      Included in the kit:

      Turbosmart Gen-V Wastegate, valve seat, inlet V-band, inlet V-band flange, outlet V-band, outlet V-band flange, spring kit, Turbosmart connection kit, adjustment tool

      753 лв. цена с ДДС
    • Turbosmart Wastegate WG45 Gen-V HyperGate 45-0-5 Turbosmart 2100441 BMW Z4 Cabrio E89 sDrive 23 i
      Информация:

      Water-cooled, external wastegate valve from Turbosmart.

      The valve comes complete with V-band stainless steel flanges for easy installation. The housing is made of anodized aluminum and can be ordered in blue or black. The Wastegate can be used with or without water cooling. Due to the compact design the Wastegate can be installed almost everywhere. The Wastegate can be turned in 12 different positions.

      Features:

      • 45mm V-Band flange
      • Complete with flanges and freely configurable
      • Modular configurable actuator
      • 0,5 bar spring pre-installed
      • High temperature resistant
      • Stainless steel valve body
      • 2 different colours
      • Diaphragm made of temperature-resistant Nomex silicone
      • 1/8″ NPT Control ports
      • 1/8″ NPT Water connections
      • Integrated water cooling, if required!
      • Incl. spring kit for charging pressures from 0.2 - 1.79 bar

      Included in the kit:

      Turbosmart Gen-V Wastegate, valve seat, inlet V-band, inlet V-band flange, outlet V-band, outlet V-band flange, spring kit, Turbosmart connection kit, adjustment tool

      988 лв. цена с ДДС
    • Turbosmart Wastegate WG45 Gen-V HyperGate 45-1 Turbosmart 2100442 BMW Z4 Cabrio E89 sDrive 23 i
      Информация:

      Water-cooled, external wastegate valve from Turbosmart.

      The valve comes complete with V-band stainless steel flanges for easy installation. The housing is made of anodized aluminum and can be ordered in blue or black. The Wastegate can be used with or without water cooling. Due to the compact design the Wastegate can be installed almost everywhere. The Wastegate can be turned in 12 different positions.

      Features:

      • 45mm V-Band flange
      • Complete with flanges and freely configurable
      • Modular configurable actuator
      • 0,5 bar spring pre-installed
      • High temperature resistant
      • Stainless steel valve body
      • 2 different colours
      • Diaphragm made of temperature-resistant Nomex silicone
      • 1/8″ NPT Control ports
      • 1/8″ NPT Water connections
      • Integrated water cooling, if required!
      • Incl. spring kit for charging pressures from 0.2 - 1.79 bar

      Included in the kit:

      Turbosmart Gen-V Wastegate, valve seat, inlet V-band, inlet V-band flange, outlet V-band, outlet V-band flange, spring kit, Turbosmart connection kit, adjustment tool

      988 лв. цена с ДДС
    Спирачна система
    Спирачна система
    Окачване на колелата
    Окачване на колелата
    Кормилна система
    Кормилна система
    Задвижване на колелата
    Задвижване на колелата
    Трансмисия
    Трансмисия
    Ремъчно задвижване
    Ремъчно задвижване
    Части за двигател
    Части за двигател
    Части за цилиндров блок
    Части за цилиндров блок
    Гарнитури
    Гарнитури
    Охладителна система
    Охладителна система
    Климатична система
    Климатична система
    Отопление и вентилация
    Отопление и вентилация
    Отопление и вентилация - BMW Z4 Cabrio E89 sDrive 23 i
    Затвори
    Филтри
    Филтри
    Масла и течности
    Масла и течности
    Запалителна система
    Запалителна система
    Датчици и сензори
    Датчици и сензори
    Горивна система
    Горивна система
    Електрическа система
    Електрическа система
    Стартова система
    Стартова система
    Почистване на стъклата
    Почистване на стъклата
    Ауспуси и гърнета
    Ауспуси и гърнета
    Едрогабаритни части
    Едрогабаритни части
    Светлини
    Светлини
    Интериор
    Интериор
    Добавки
    Добавки
    Тунинг
    Тунинг
    Автоаксесоари
    Автоаксесоари
    Задължително оборудване
    Задължително оборудване
    Инструменти
    Инструменти
    Аксесоари и облекло
    Аксесоари и облекло
    Аксесоари и облекло - BMW Z4 Cabrio E89 sDrive 23 i
    Затвори
    Технически характеристикиТехнически характеристики
    Общи данни Общи данни
    Контролни стойности за изгорелите газове Контролни стойности за изгорелите газове
    Данни за ходовата част Данни за ходовата част
    Спирачна уредба Спирачна уредба
    Електроника Електроника
    Консумативи Консумативи
    Осветление Осветление
    Интервали за смяна Интервали за смяна
    Общи данни
    Общи сведения основни стойности
    Вид на управлението на двигателя
    Ангренажна верига
    Ход
    79,00 мм
    Вътрешен диаметър на цилиндъра
    82,00 мм
    Вентили за един цилиндър
    4
    Ъгъл на гнездото на вентила - всмукателен клапан
    45°
    Ъгъл на гнездото на вентила - изпускателен клапан
    45°
    Количество на нужните запалителни свещи/нагревателни свещи
    6
    Налягане при сгъстяване
    9,00 - 18,00 bar
    Степен на сгъстяване
    11,00 :1
    Минимално налягане на маслото при празен ход
    1,50 bar
    При двигател в топло работно състояние.
    Максимално забавяне глава на цилиндъра
    надлъжно
    0,100 мм
    Максимално забавяне глава на цилиндъра
    напречно
    0,050 мм
    Минимална височина на цилиндричната глава
    111,65 - 111,75 мм
    Контролни стойности за изгорелите газове
    Общи стойности, съществени за изгорелите газове
    Положение щепсел за диагноза
    Контактът за диагностика се намира от страната на водача, в пространството за крака при A конзола.
    photoicon
    Данни за ходовата част
    Джанти и гуми
    Налягане при пълнене на гумите отпред
    0,00 bar
    виж стикера от вътрешната страна на вратата на водача или B - колона.
    Налягане при пълнене на гумите отзад
    0,00 bar
    виж стикера от вътрешната страна на вратата на водача или B - колона.
    Ходова част размери
    База
    2496 мм
    Спирачна уредба
    Измерения на спирачката
    Дебелина на спирачния диск преден мост
    при диаметър на спирачните дискове 384
    30,00 мм
    Дебелина на спирачния диск преден мост
    при диаметър на спирачните дискове 330
    24,00 мм
    Дебелина на спирачния диск преден мост
    при диаметър на спирачните дискове 300
    24,00 мм
    Дебелина на спирачния диск граница на износване преден мост
    при диаметър на спирачните дискове 384
    28,40 мм
    Дебелина на спирачния диск граница на износване преден мост
    при диаметър на спирачните дискове 330
    22,40 мм
    Дебелина на спирачния диск граница на износване преден мост
    при диаметър на спирачните дискове 300
    22,40 мм
    Максимално странично биене на спирачния диск преден мост
    0,01 мм
    Дебелина на спирачния диск заден мост
    при диаметър на спирачните дискове 324
    20,00 мм
    Дебелина на спирачния диск заден мост
    при диаметър на спирачните дискове 300
    20,00 мм
    Дебелина на спирачния диск граница на износване заден мост
    18,40 мм
    Максимално странично биене на спирачния диск заден мост
    0,01 мм
    Дебелина на спирачната накладка граница на износване преден мост
    без задна пластина
    3,70 мм
    Дебелина на спирачната накладка граница на износване заден мост
    Работна спирачка, без задна пластина
    3,70 мм
    Спирачен диск диаметър преден мост
    Вариант 1
    300,00 мм
    Спирачен диск диаметър преден мост
    Вариант 2
    330,00 мм
    Спирачен диск диаметър преден мост
    Вариант 3
    384,00 мм
    Спирачен диск диаметър заден мост
    Вариант 1
    300,00 мм
    Спирачен диск диаметър заден мост
    Вариант 2
    324,00 мм
    Електроника
    Общи сведения за електрическата част
    Напрежение на акумулатора
    12 волта
    Консумативи
    Количество запълващи вещества и спецификации
    Двигателно масло с филтър
    6,50 литра
    Двигателно масло с филтър
    с допълнителен маслен радиатор
    7,00 литра
    Вискозност моторно масло
    BMW Longlife -01
    0W-30, 0W-40, 5W-30, 5W-40
    Вискозност моторно масло
    BMW Longlife -01 FE
    SAE 0W-30
    Вискозност моторно масло
    BMW Longlife -04
    SAE 0W-30|SAE 0W-40|SAE 5W-30|SAE 5W-40
    Спецификация двигателно масло
    Вариант 1
    BMW Longlife-04
    Спецификация двигателно масло
    Вариант 2
    BMW Longlife-01
    Спецификация двигателно масло
    Вариант 3
    BMW Longlife-01 FE
    Масло за скоростната кутия
    Скоростна кутия GS6-17BG/DG, Ново запълване
    1,40 литра
    Масло за скоростната кутия
    Скоростна кутия GS6-17BG/DG, Количество за смяна
    1,30 литра
    Спецификация масло за скоростна кутия
    Скоростна кутия GS6-17BG/DG
    MTF-LT-3
    Масло за автоматична скоростна кутия
    Ново запълване
    9,00 литра
    Спецификация масло за автоматична скоростна кутия
    83 22 0 142 516
    Оригинално масло
    Антифриз
    със скоростна кутия
    8,20 литра
    Антифриз
    с автоматична скоростна кутия
    8,50 литра
    Спецификация охладителна течност
    83 19 2 211 191
    Спирачна течност при смяна
    с автоматична скоростна кутия
    1,00 литра
    Спирачна течност при смяна
    със скоростна кутия
    1,25 литра
    Спецификация спирачна течност
    DOT 4 Class 6
    Средства за охлаждане климатична инсталация
    570 - 590 грама
    Спецификация охлаждащи средства
    R134a
    Обем на резервоара за гориво
    55 литра
    Осветление
    Предни фарове
    Къси светлини
    D1S 85V 35W PK32d-2
    photoicon
    Дълги светлини
    D1S 85V 35W PK32d-2
    photoicon
    Светлини за дневно каране
    H8 12V 35W PGJ19-1
    photoicon
    Светлини за дневно каране
    Принадлежащи артикули
    DAY1
    Габарити
    H8 12V 35W PGJ19-1
    photoicon
    Мигач преден
    PY24W 12V 24W PGU20/4
    Мигач страничен
    LED
    Оригинален детайл
    Задни фарове
    Мигач заден
    LED
    Оригинален детайл
    Задна светлина
    LED
    Оригинален детайл
    Стоп
    W16W 12V 16W W2,1x9,5d
    photoicon
    Светлини за обратен ход
    W16W 12V 16W W2,1x9,5d
    photoicon
    Задни фарове за мъгла
    H21W 12V 21W BAY9s
    photoicon
    Осветление на табелата с регистрационния номер
    LED
    Оригинален детайл
    Допълнителни стопове
    LED
    Оригинален детайл
    Вътрешни лампи
    Лампа в багажника
    W5W 12V 5W W2,1x9,5d
    photoicon
    Лампа за подовото пространство
    W5W 12V 5W W2,1x9,5d
    photoicon
    Лампа за четене
    Xenon W6 12V 6W W2,1x9,5d
    photoicon
    Лампа на жабката
    C5W 12V 5W SV8,5 (11x35)
    photoicon
    Интервали за смяна
    За сервизни данни
    Въздушен филтър интервал за смяна
    при всеки 2. смяна на маслото в двигателя
    Запалителни свещи интервал за смяна
    при всеки 2. смяна на маслото в двигателя
    Спирачна течност интервал за смяна
    до 2011/02
    на всеки 2 години
    Спирачна течност интервал за смяна
    от 2011/03 и нагоре
    първо след 3 години, след това на всеки 2 години
    Моторно масло и филтър интервал за смяна
    съгл. сервизен индикатор
    Филтър купе интервал за смяна
    при всяка смяна на маслото в двигателя
    Избраното МПС е успешно добавено във вашия гараж. +
    BMW Z4 Cabrio E89 sDrive 23 i - 204 коня Въведете рама
    BMW Запази
    Изчисти цялата история

    ТОП производители

    star star star star star
    Потребителят не е написал отзив, а направи само оценка. G
    Valco Zlatanov
    Valco Zlatanov
    19 March 2024
    star star star star star
    Потребителят не е написал отзив, а направи само оценка. G
    Todor Georgiev
    Todor Georgiev
    17 March 2024
    star star star star star
    Потребителят не е написал отзив, а направи само оценка. G
    Bayram Bayramov
    Bayram Bayramov
    16 March 2024
    star star star star star
    Потребителят не е написал отзив, а направи само оценка. G
    lyubomir petrov
    lyubomir petrov
    15 March 2024
    star star star star star
    Потребителят не е написал отзив, а направи само оценка. G
    Mihko Syarov
    Mihko Syarov
    15 March 2024
    star star star star star
    Потребителят не е написал отзив, а направи само оценка. G
    Nicola
    Nicola
    15 March 2024