Интеркулери Wagner Tuning за Ford Galaxy 2.3 - 160 коня бензин SEWA - онлайн магазин

Competition Radiator Kit for the BMW F87 M2 The 3.0 Liter S55B30 turbo engine of BMW M2 Competition is equipped with an indirect charge-air cooling circuit. So the cooling of the charged air is not realized by the ambient air as cooling medium (as usual), but made with its own cooling water circuit. A reduction of the temperature of the cooling water is directly equated with an improved cooling performance of the charged air. This is exactly where the advantages of the WAGNERTUNING upgrade water cooler comes into play.The new developed competition racing cores of the WAGNERTUNING high performance water coolers increase the radiator volume of the OEM water coolers by 89% for front mounted and 94% for side mounted. The calculated ratio between the inner and outer cooling surface generates a maximum heat transfer and allows at the same time enough air flow for the surrounding components (for example the engine water cooler) for its own heat exchange. The water coolers are equipped with a heat-conductive anti corrosion coating to ensure a lasting cooling effect. The nearly plug & play installation of the system is simple and easy to perform (an installation instruction is included as well). Dimensions OEM front mounted radiator:590 mm x 308 mm x 25 mm / 23,2Inch x 12,1Inch x 1,0InchV = 4,5 LiterA = 1817 cm² / 280,7Inch² Dimensions WT front mounted radiator:568 mm x 468,4 mm x 32 mm / 22,4Inch x 18,4Inch x 1,26InchV = 8,5 Liter (+89%)A = 2660,5 cm² / 412,2Inch² (+46,4%) Dimensions OEM side mounted radiator:250 mm x 165 mm x 40 mm / 9,8Inch x 6,5Inch x 1,6InchV = 1,65 LiterA = 412,5 cm² / 63,7Inch² Dimensions WT side mounted radiator:252 mm x 188 mm x 68 mm / 9,9Inch x 7,4Inch x 2,7InchV = 3,2 Liter (+94%)A = 473,8 cm² / 73,3Inch² (+14,9%) Kit comes with:1x front mounted radiator (low-temperature circuit)1x side mounted radiator (low-temperature circuit)1x carbon air shroud for side mounted radiator1x mounting material1x installation instruction  

Experience the ultimate performance upgrade with our high performance intercooler for the BMW M135i and M235i. This impressive intercooler sets new standards and is specifically designed to meet the high demands of the big tuning levels. With intecooler core dimensions of 510mm x 345mm x 180mm (stepped 23.56L), our intercooler offers a 165% larger flow area and a whopping 223% more charge air volume than the original intercooler. The high-quality Competition high-performance core with internal turbulators ensures optimum cooling performance. Despite its imposing size, the entire intercooler weighs just 13.8 kg, highlighting its efficiency and lightweight construction. The cast aluminum end boxes of the charge air cooler were optimized using flow analyses in the CFD system to ensure outstanding cooling properties with minimal backpressure. Our kit EVO3 eliminates the original click connections and expands the connection diameters to Ø65mm at the inlet and Ø76mm at the outlet. Additionally, the kit includes reinforced silicone tubing and an aluminum charge air tube in Ø76mm. The result is unmatched cooling performance with a significant increase in power. Our intercoolers are all coated with a high-quality anti-corrosion coating, which not only ensures protection against environmental influences, but also has excellent heat conduction properties. This ensures long-lasting and optimal cooling. Our intercooler kit is supplied complete and is ready for installation. Replacing it with the stock parts is easy thanks to the modified crossmember that comes with it. Due to the extreme size of the intercooler, minor adjustments to the radiator support may be required. Our high performance intercooler has been tested under extreme conditions and is pressure stable up to 6 bar. Each of our products is subject to constant qualitative monitoring to ensure the highest reliability. This intercooler is the perfect choice for racing and lets your vehicle set new standards in power and performance.  APPLICATIONS BMW F30 / F31 / F34 / F35 335i 225KW/306hp (2012-2015) BMW F32 / F36 435i 225KW/306PS (2013-2016)Not suitable for xDrive models.

Competition transmission oil cooler kit for BMW M3/M4 G8X S58 The WagnerTuning transmission oil cooler kit is a must have for all racing enthusiasts as it effectively prevents oil temperatures from rising above optimal levels. Even when subjected to demanding conditions, the additional cooling surface efficiently reduces the oil temperature, which ensures consistent oil pressure. Kit comes with:1x oil cooler (coated black)1x mounting materialKEY FEATURES +81.6% larger frontal flow area +93.6% larger core volume guarantees optimal oil cooling even for tuned cars plug & play installation  APPLICATIONS BMW M3/M4 G8X S58 

The 3.0L R6 biturbo engine of BMW M3/M4 models is equipped with an indirect charge-air cooling circuit. So the cooling of the charged air is not realized by the ambient air as cooling medium (as usual), but made with its own cooling water circuit. A reduction of the temperature of the cooling water is directly equated with an improved cooling performance of the charged air. This is exactly where the advantages of the WAGNERTUNING upgrade water cooler comes into play.The new developed competition racing core of the WAGNERTUNING high performance water coolers increase the radiator volume of the OEM water coolers by a total of 60 %. The calculated ratio between the inner and outer cooling surface generates a maximum heat transfer and allows at the same time enough air flow for the surrounding components (for example the engine water cooler) for its own heat exchange. The water coolers are equipped with a heat-conductive anti corrosion coating to ensure a lasting cooling effect. The plug & play installation of the system is simple and easy to perform (an installation instruction is included as well). Dimensions OEM radiator:505 mm x 605 mm x 30 mmV = 9,16 LiterA = 3055 cm² Dimensions WT radiator:505 mm x 605 mm x 48 mmV = 14,67 LiterA = 3055 cm²APPLICATIONS BMW G87 M2 338kW/460 PS from 2023+ BMW G80/81 M3 (Competition) 353-375KW/480-510PS from 2021+ BMW G82 M4 (Competition/CSL) 353-405KW/480-550PS from 2021+

Discover the revolution in performance tuning for your 3.0-liter S58 turbo M-model engine with the innovative WAGNERTUNING intake manifold with integrated intercooler. Designed to meet the high demands of the S58 engine, this exceptional kit features a special Competition intercooler core that has an impressive 50% larger external core volume compared to the original intercooler. The optimal ratio between inner and outer cooling surface maximizes heat transfer while ensuring the best possible internal airflow. The end boxes are made of high quality aluminum chill casting and have been designed for optimal airflow conditions through CFD simulations, resulting in outstanding cooling characteristics with minimal back pressure. This kit is the perfect choice. Our WAGNERTUNING intercoolers feature a thermally conductive anti-corrosion coating to ensure maximum durability and performance. Installation of the system is straightforward thanks to our detailed installation instructions and can easily be done as a plug and play. Enjoy the numerous benefits of this product:- Achieve significantly improved cooling performance with intake air temperatures that are up to 20° cooler.- Relieve your turbocharger both mechanically and thermally in a maximum way.- Experience an impressive increase in power and torque for your engine.- Benefit from 100% pressure resistance and reliability.- Plug-and-play feature allows for easy installation without modifications.- The intake manifold is suitable for use with prepared intake manifold injectors (optional fuel rail available).- Use the 1/8 NPT ports to measure and monitor additional parameters.- This intake manifold is ideal for all power levels. Get your engine ready for unparalleled performance and take your driving experience to the next level. Opt for the Wagner Tuning intake manifold with integrated intercooler and experience a new dimension of power, speed and driving pleasure. Discover the limits of what is possible and take your performance to the next level.KEY FEATURES significantly better cooling performance (up to 20°C cooler IAT) maximum mechanical discharge of the turbocharger more power and torque for your engine 100% pressure resistance 100% Plug and Play (no modifications) preprocessed port fuel injection (fuel rail optionally available) 1/8 NPT ports for measuring additional parameters this intake manifold is suitable for all performance levels  APPLICATIONS BMW G87 M2 338kW/460 hp BMW G80/G81 M3 353-375kW/480-510hp BMW G82 M4 353-405kW/480-550HP BMW F98 X4M 353-375kW/480-510hp

Unleash the full potential of your vehicle with the revolutionary Competition intercooler - a true performance boost for ultimate driving experiences! Our latest generation of high performance intercoolers take you to a new level of performance. With intercooler core dimensions of 2 x [270mm x 296mm x 115mm] and an impressive charge air volume of 18.4 liters, they offer an incredible 50% more airflow compared to the stock intercooler. In the process, the specially developed performance high-performance core provides superior cooling characteristics and wont let your engine down, even under extreme conditions. With a weight of just 9.0 kg per intercooler, we are setting new standards in lightweight design. The CAD-developed free-form end boxes made of high-quality cast aluminum guarantee optimum internal air flow and impressive pressure resistance of up to 6 bar (tested). Our reinforced silicone hoses and aluminum charge air tube provide excellent flow characteristics while maintaining high pressure resistance. In this way, we minimize back pressure and maximize the performance of your vehicle. To ensure long-lasting durability, all of our intercoolers feature a high-quality anti-corrosion coating with excellent heat conduction properties. This keeps your cooling at optimal levels at all times, and you benefit from a significant performance boost that will inevitably set you apart from the competition. Our ready-to-install kit makes it easy to replace the stock intercooler - no complex modifications required. Because with us, every minute you spend on the race track counts. And to make sure you get only the best, all our products are subject to strict quality monitoring. Are you ready to take racing to a new level? Then choose the Competition intercooler and experience the power you deserve!APPLICATIONS Audi RS Q8 4M 441KW/600PS as of 2019 Lamborghini Urus 478-490KW/650-666PS as of 2018 Porsche Cayenne Turbo GT 471KW/640HP 2019-2023 Porsche Cayenne Turbo 404KW/550HP 2019-2023 Porsche Cayenne Turbo S E-Hybrid 500KW/680HP 2019-2023 Adjustments to the original air duct necessary

Dive into a new dimension of performance and experience a powerful power boost for your 3.0 liter B58.2 turbo engine with our state-of-the-art intake manifold. The integrated intercooler, which is placed directly in the intake manifold, enables an efficient cooling process of the charge air and thus ensures optimum performance. Our WAGNERTUNING intake manifold with integrated intercooler was developed specifically for the high demands and tight spaces of the B58.2 engine. With its new type of performance mesh, it offers an impressive 128% larger external mesh volume compared to the original intercooler. The optimal ratio of internal to external cooling surface area maximizes heat transfer while ensuring the best possible internal airflow. The CNC machined from solid end boxes, optimized using CFD simulations, provide outstanding cooling characteristics with minimal back pressure. This kit is therefore also perfectly suited for racing and allows optimal cooling of the charged air with an impressive increase in performance. Our WAGNERTUNING intake manifold is equipped with a heat-conducting anti-corrosion coating, which ensures a lasting cooling effect and optimally protects your engine. The installation of the system is uncomplicated thanks to our installation instructions and can be carried out Plug & Play without any problems.  KEY FEATURES A significantly improved cooling performance for up to 20° cooler intake air temperatures. Maximum mechanical and thermal relief of the turbocharger for longer engine life and 35% less backpressure. More power and torque for a breathtaking driving experience. 100% pressure resistance for reliable performance. Easy plug and play installation with no modifications. preprocessed port fuel injection Three 1/8 NPT ports for additional parameter measurement. six preprocessed NOS or WMI ports Suitable for all performance levels, from street to racing. Up to 4 years warranty for your complete satisfaction. Important information for the oil service: The oil filter can still be done without disassembling the intake manifold again APPLICATIONS BMW 2 series G42 M240i BMW 3 series G20/G21 M340i BMW 4 series G22/G23/G26 M440i BMW Z4 G29 M40i Toyota GR Supra MK5

The 4.4 Liter V8 biturbo engine (S63 B44T4) of BMW M-models is equipped with an indirect charge-air cooling circuit. So the cooling of the charged air is realized by a watercooled intercooler which will be replaced by this WagnerTuning high-performance intercooler. The WAGNERTUNING high-performance intercooler has got a new performance core with the external core dimensions 192 mm x 156 mm x 128 mm / 8,23Inch x 6,89Inch x 4,33Inch. This intercooler core was directly developed for the high requirements of the BMW M5/M8 engine and offers 75 % more external core volume compared to the stock intercooler. The calculated ratio between the inner and outer cooling surface generates a maximum heat transfer and at the same time the best possible internal air flow. The aluminum cast endtanks were designed in CAD and optimized in CFD simulations. The result is an excellent cooling property with a minimal back pressure. That`s why this kit is also perfect for racing use. An optimal cooling effect of the charged air with a significant increase in performance! All WAGNERTUNING radiators are equipped with a heat-conductive anti corrosion coating to ensure a lasting cooling effect. The plug & play installation of the system is simple and easy to perform (an installation instruction is included as well). core dimensions stock intercooler:152 mm x 143 mm x 100 mmV = 2,19 Liter core dimensions WT intercooler:192 mm x 156 mm x 128 mmV = 3,83 Liter (+75%) Kit comes with:2 Intercooler5 Silicone hoses1 Mounting material  KEY FEATURES significantly better cooling performance more power and torque for your engine mechanical discharge of the turbocharger additional WMI-Ports (we recommend using Part No.SP30401 from Snow Performance) 100% pressure resistance 100% Plug and Play up to 4 years warranty APPLICATIONS BMW F90 M5 441KW/600PS (2017+) BMW F90 M5 Competition 460KW/625PS (2018+) BMW F90 M5 CS 467KW/635PS (2021+) BMW F91/92/93 M8 441KW/600PS (2019+)

This Fuel Rail for BMW/Toyota B58 and the EVO1 Intake Manifold/Intercooler are designed for Bosch EV14 Compact injectors and has 2 ORB-8 3/4x16 ports.  

The 3.0 Liter B58.1 turbo engine of the specified BMW models is equipped with an indirect charge-air cooling circuit. So the cooling of the charged air is realized by a watercooled intercooler, which is integrated directly into the intake manifold. The WAGNERTUNING intake manifold with integrated intercooler has got a new performance core which was specially developed for the high requirements and individual mounting position of the B58.1 engine and offers 128% more external core volume compared to the original intercooler. The calculated ratio between the inner and outer cooling surface generates a maximum heat transfer and at the same time the best possible internal air flow. With the help of CFD simulations, the CNC-milled endtanks were designed for optimal air flow conditions. The result is an excellent cooling property with a minimal back pressure. That`s why this kit is also perfect for racing use. An optimal cooling effect of the charged air with a significant increase in performance! All WAGNERTUNING radiators are equipped with a heat-conductive anti corrosion coating to ensure a lasting cooling effect. The plug & play installation of the system is simple and easy to perform (an installation instruction is included as well).  KEY FEATURES significantly better cooling performance (up to 20°C cooler IAT) maximum mechanical discharge of the turbocharger (35% less back pressure) more power and torque for your engine 100% pressure resistance 100% Plug and Play (no modifications) preprocessed port fuel injection three 1/8 NPT ports for measuring additional parameters six preprocessed NOS or WMI ports this intake manifold is suitable for all performance levels up to 4 years warranty important information for oil service: the oil filter still can be replaced without removing the intake manifold again! APPLICATIONS BMW 1er F20/21 M140i BMW 2er F22/23 M240i BMW 3er F30/31 M340i BMW 4er F32/33/36 M440i

Competition Radiator Kit for Mercedes Benz AMG GTMercedes C190 AMG GT 340-390KW/462-530PS (2015-2020)Mercedes C190 AMG GT S 340-390KW/462-530PS (2015-2020)Mercedes C190 AMG GT C 410KW/557PS (2017+)Mercedes C190 AMG GT R 430KW/585PS (2017+)The 4.0L V8 biturbo engine of the specified AMG GT models is equipped with an indirect charge-air cooling circuit. So the cooling of the charged air is not realized by the ambient air as cooling medium (as usual), but made with its own cooling water circuit. A reduction of the temperature of the cooling water is directly equated with an improved cooling performance of the charged air. This is exactly where the advantages of the WAGNERTUNING upgrade water cooler comes into play.The new developed competition racing core of the WAGNERTUNING high performance water coolers increase the radiator volume of the OEM water coolers by a total of 75 %. The calculated ratio between the inner and outer cooling surface generates a maximum heat transfer and allows at the same time enough air flow for the surrounding components (for example the engine water cooler) for its own heat exchange. The water cooler is equipped with a heat-conductive anti corrosion coating to ensure a lasting cooling effect. The plug & play installation of the system is simple and easy to perform (an installation instruction is included as well).Dimensions OEM front mounted radiator:640 mm x 420 mm x 26 mmV = 7,00 LiterA = 2688 cm²Dimensions WT front mounted radiator:645 mm x 395 mm x 52 mmV = 12,2 Liter +75%A = 2546 cm²

Performance INTERCOOLER KIT Mercedes AMG GTMercedes C190 AMG GT 340-390KW/462-530PS (2015-2020)Mercedes C190 AMG GT S 340-390KW/462-530PS (2015-2020)Mercedes C190 AMG GT C 410KW/557PS (2017+)Mercedes C190 AMG GT R 430KW/585PS (2017+)The 4.0 Liter V8 biturbo engine (M178 DE 40 AL) of AMG models is equipped with an indirect charge-air cooling circuit. So the cooling of the charged air is realized by a watercooled intercooler which will be replaced by this WagnerTuning high-performance intercooler.The WAGNERTUNING high-performance intercooler has got a new performance core with the external core dimensions 209 mm x 175 mm x 110 mm / 8,23Inch x 6,89Inch x 4,33Inch. This intercooler core was directly developed for the high requirements of the AMG engine and offers 86 % more external core volume compared to the stock intercooler. The calculated ratio between the inner and outer cooling surface generates a maximum heat transfer and at the same time the best possible internal air flow. The aluminum cast endtanks were designed in CAD and optimized in CFD simulations. The result is an excellent cooling property with a minimal back pressure. That`s why this kit is also perfect for racing use. An optimal cooling effect of the charged air with a significant increase in performance!All WAGNERTUNING radiators are equipped with a heat-conductive anti corrosion coating to ensure a lasting cooling effect. The plug & play installation of the system is simple and easy to perform (an installation instruction is included as well).Advantages of this product:- significantly better cooling performance- less pressure drop- more power and torque for your engine- mechanical discharge of the turbocharger- 100% pressure resistance- 100% Plug and Play- up to 4 years warrantycore dimensions stock intercooler:177 mm x 153 mm x 80 mmV = 2,16 Litercore dimensions WT intercooler:209 mm x 175 mm x 110 mmV = 4,02 Liter (+86%)Kit comes with:2 Intercooler4 Silicone hoses1 Mounting material

Competition Radiator Kit for the Mercedes Benz C63 (S) AMGMercedes Benz W205 C63 AMG 350KW/476PS (since 2015)Mercedes Benz W205 C63S AMG 375KW/510PS (since 2015)The 4.0L V8 biturbo engine of the specified C63 (S) models from AMG is equipped with an indirect charge-air cooling circuit. So the cooling of the charged air is not realized by the ambient air as cooling medium (as usual), but made with its own cooling water circuit. A reduction of the temperature of the cooling water is directly equated with an improved cooling performance of the charged air. This is exactly where the advantages of the WAGNERTUNING upgrade water cooler comes into play.The new developed competition racing core of the WAGNERTUNING high performance water coolers increase the radiator volume of the OEM water coolers by a total of 80 %. The calculated ratio between the inner and outer cooling surface generates a maximum heat transfer and allows at the same time enough air flow for the surrounding components (for example the engine water cooler) for its own heat exchange. The water coolers are equipped with a heat-conductive anti corrosion coating to ensure a lasting cooling effect. The plug & play installation of the system is simple and easy to perform (an installation instruction is included as well).Dimensions OEM front mounted radiator:640 mm x 430 mm x 27 mmV = 7,43 LiterA = 2752 cm²Dimensions WT front mounted radiator:645 mm x 395 mm x 52 mmV = 13,25 LiterA = 2548 cm²Dimensions OEM side mounted radiator:240 mm x 250 mm x 27 mmV = 1,62 LiterA = 600 cm²Dimensions WT side mounted radiator:240 mm x 240 mm x 52 mmV = 3,00 LiterA = 576 cm²

Competition Intercooler Kit EVO3 for Audi TTRS 8S now available with TÜV certificate and two different intercooler core optionsImportant note:We recommend to use the standard version for power applications up to 600HP and the X-version for power application above 600HP.The high performance intercooler has the following core dimension (515mm x 367mm x 95mm = 16.500cm³) and thus offers a 84% larger cooling surface and 101% more charge air volume compared to the original intercooler. Our engineers have increased the intercooler core size and efficiency, as well as improved the end tank design to remove any OEM bottlenecks, resulting in increased flow rating and charge cooling properties. This Audi RS3 intercooler uses our award winning WAGNERTUNING Competition Intercooler Core, which is made specifically for this application. Constructed of the highest quality Tube and Fin intercooler cores with inside turbulators combined with cast aluminum endtanks optimized by CFD for best possible internal airflow. With the help of additional air guides, inside inlet, a uniform filling of the intercooler is provided. The result is excellent cooling properties with minimum pressure drop. So this kit is just the right thing for racing. The intercooler and the original crossmember form a stable unit and weighs only 11.7 kg. It is mounted to the original mounting points and is easy to perform (simple adjustments necessasy - check installation instruction). Optimum cooling of the charged air with a clear increase in performance! 68mm In and Outlets.OEM intercooler:cooling surface 1024cm²(158,7Inch²)charge-air-volume 8,2L (500,4Inch³)WT EVO 3 Competition:cooling surface 1890cm² (293Inch²)charge-air-volume 16,5L (1006,9Inch³)kit comes with:1 intercooler including crossmember1 mounting material1 installation instruction1 TÜV Certification (*only for Non-OPF cars)

new product- beginning 2022!Competition INTERCOOLER KIT for Audi RS6 C8Item no.: 200001180*Customizations required when the vehicle is equipped with a parking heaterThe Wagner Tuning Audi RS6 C8 Intercooler Kit has the following core size (2 x [265mm x 340mm x 105mm] = 18,9L)/(2x[10,4Inch x 13,4Inch x 4,1Inch = 1050,64Inch³), providing 41% more volume compared to the stock mounted intercooler. Our engineers have increased the intercooler core size and efficiency, as well as improved the end tank design to remove any OEM bottlenecks, resulting in increased flow rating and charge cooling properties. This intercooler Kit uses a new developed Wagner Tuning Competition Intercooler Core which is made specifically for this application. It is one of the highest quality Tube Fin cores available on the market. Each intercooler has just a weight of 6,5kg. Flow analyses and simulations were created to optimise the design for best possible Internal Airflow. The Intercooler Kit also includes 2pcs suitable carbon air shroud to ensure optimum airflow to the intercooler. This intercooler kit is the best choice when it comes to performance gains and low intake temperatures. Anti Corrosion protective Coating with perfect thermal heat dissipating character. Optimal cooling with clearly more power. Kit is ready for installation. Fitment is easy, replacing the OEM intercooler. All of our products undergo rigorous quality control and are also tested by compressive strength of up to 6 bar. This intercooler kit is suitable for racing.Stock Intercooler:V = 13,4 LA = 1490 cm²WAGNERTUNING Intercooler:V = 18,9 L (+41%)A = 1802 cm² (+21%)Kit comes with:2 Intercooler (black powder coated)2 Carbon air shrouds4 Silicone hoses1 Mounting Material1 Installation Instruction

Competition - Radiator - Kit for Audi RS4 B9 / RS5 F5Fits plug and play to following models:Audi RS4 B9 331KW/450PS from 2017Audi RS5 F5 331KW/450PS from 2017The 2.9L V6 biturbo engine of Audi RS4 / RS5 models is equipped with an indirect charge-air cooling circuit. So the cooling of the charged air is not realized by the ambient air as cooling medium (as usual), but made with its own cooling water circuit. A reduction of the temperature of the cooling water is directly equated with an improved cooling performance of the charged air. This is exactly where the advantages of the WAGNERTUNING upgrade water cooler comes into play.The new developed competition racing core of the WAGNERTUNING high performance water coolers increase the radiator volume of the OEM water coolers by a total of 55 %. The calculated ratio between the inner and outer cooling surface generates a maximum heat transfer and allows at the same time enough air flow for the surrounding components (for example the engine water cooler) for its own heat exchange. The water coolers are equipped with a heat-conductive anti corrosion coating to ensure a lasting cooling effect. The plug & play installation of the system is simple and easy to perform (an installation instruction is included as well).Dimensions OEM radiator:720 mm x 485 mm x 25 mmV = 8,73 LiterA = 3492 cm²Dimensions WT radiator:690 mm x 490 mm x 40 mmV = 13,52 LiterA = 3381 cm²

 Performance INTERCOOLER KIT Audi RS4 B9 / RS5 F5The 2.9 Liter V6 biturbo engine (VW EA839) of RS4/RS5 models is equipped with an indirect charge-air cooling circuit. So the cooling of the charged air is realized by a watercooled intercooler which will be replaced by this WagnerTuning high-performance intercooler.The WAGNERTUNING high-performance intercooler has got a new performance core with the external core dimensions 222 mm x 200 mm x 120 mm / 8,74Inch x 7,87Inch x 4,72Inch. This intercooler core was directly developed for the high requirements of the RS4/RS5 engine and offers 185 % more external core volume compared to the stock intercooler. The calculated ratio between the inner and outer cooling surface generates a maximum heat transfer and at the same time the best possible internal air flow. The aluminum cast endtanks were designed in CAD and optimized in CFD simulations. The result is an excellent cooling property with a minimal back pressure. That`s why this kit is also perfect for racing use. An optimal cooling effect of the charged air with a significant increase in performance!All WAGNERTUNING radiators are equipped with a heat-conductive anti corrosion coating to ensure a lasting cooling effect. The plug & play installation of the system is simple and easy to perform (an installation instruction is included as well).Advantages of this product:- significantly better cooling performance- less pressure drop- more power and torque for your engine- mechanical discharge of the turbocharger- 100% pressure resistance- 100% Plug and Play- up to 4 years warrantycore dimensions stock intercooler:220 mm x 100 mm x 85 mmV = 1,87 Litercore dimensions WT intercooler:222 mm x 200 mm x 120 mmV = 5,33 Liter (+185%)Kit comes with:1 Intercooler2 Silicone hose (air)6 Silicone hoses (water)1 Mounting material1 Intstallation instruction

Competition Intercooler Kit EVO1 for Audi RS3 8V / 8Y and TTRS 8SAudi RS3 8V Sportback 270KW/367PS 04/2015-04/2016Audi RS3 8V Sportback/Sedan 294KW/400PS 08/2017+Audi RS3 8Y Sportback/Sedan 294KW/400PS 2021+Audi TTRS 8S 294KW/400PS 11/2016+Audi RSQ3 F3 294KW/400PS 10/2019+The Competition Intercooler has the following core dimensions (660x180x110 = 13.070cm³). The high performance intercooler core provides a 14% larger frontal area and 57% more volume compared to the stock mounted intercooler. Our engineers have increased the intercooler core size and efficiency, as well as improved the endtank design to remove any OEM bottlenecks, resulting in increased flow rating and charge cooling properties. We use our award winning WAGNERTUNING Competition Intercooler Core which is made specifically for this application. Constructed of the highest quality Tube Fin intercooler cores with inside turbulators combined with cast aluminum endtanks optimized by CFD for best possible internal airflow. The result is excellent cooling properties and less pressure drop then the stock intercooler. Despite of it´s size the weight of the complete intercooler is only 8,3kg. This Intercooler Kit is the best choice when it comes to performance gains and low intake temperatures and also the right thing for racing. All of our intercooler use an anti corrosion protective coating with perfect thermal heat dissapating character. Optimal cooling with clearly more power. Kit is ready for installation, 100% plug and play. All of our products undergo rigorous quality control.Dimensions stock Intercooler:640mm x 163mm x 80mmV=8,3 LiterA=1043 cm²Dimensions WAGNERTUNING intercooler:660mm x 180mm x 110mmV=13,07 LiterA=1188 cm²packing list:1 intercooler (coated black)1 installation instruction

The Competition Intercooler has the following core size (590mm x 170mm x 100mm = 10.030cm³), providing a 70% larger frontal area and 112% more volume compared to the original intercooler. Our engineers have increased the intercooler core size and efficiency, as well as improved the end tank design to remove any OEM bottlenecks, resulting in increased flow rating and charge cooling properties. Competition intercooler core with turbulators (weight: 6,6kg). Constructed of the highest quality Tube and Fin intercooler cores combined with cast aluminum optimized by CAD. Flow analyses and simulations were created to optimise the design for best possible internal airflow. This intercooler is the best choice when it comes to performance gains and low intake temperatures. A lot less pressure drop then OEM intercooler. Anti corrosion protective coating with perfect thermal heat dissapating character. Optimal cooling with clearly more power. Kit is ready for installation (plug & play), using the stock plumming. Fitment is easy, replacing the OEM intercooler. All of our products undergo rigorous quality control. On both sides the connection diameter is 55mm.The Competition Intercooler Kit for VAG 1,4 /2,0 TSI fits to:Audi A1 1,4 TSI 136KW/185PS (2010+)Audi A1 Quattro 2,0TFSI 188KW/256PS (2012) limited EditionAudi A1 1,6TDI 66-77KW/90-105PS (2011-2014)Audi A1 2,0TDI 105KW/143PS (2011-2014)Skoda Fabia RS 1,4 TSI 132KW/180PS (2010+)Skoda Fabia 1,6TDI 66-77KW/90-105PS (2010-2014)VW Polo 6R GTI 1,4 TSI 132KW/180PS (2010-2014)VW Polo 6R WRC 2,0 TSI 162KW/220PS (2013-2014)VW Polo 6C GTI 1,8 TSI 141KW/192PS (2015+)Fits with slight adjustment work for the following models, too:Seat Ibiza / Cupra 1,4 TSI /1,8TSI ( Explanation is located on the last page of the Installation Instruction )Seat Ibiza 1,6/2,0TDI 66-105KW/90-143PS (2009-2015) ( Explanation is located on the last page of the Installation Instruction )Package:1 charge air cooler1 installation instructions

COMPETITION INTERCOOLER KIT for:VW Polo AW GTI 2,0TSI (147KW/200PS) from 2018Audi A1 GB 40TFSI (147KW/200PS) from 2018* Note: The Audi A1 requires minimal adjustments to the interior of the bumper.The WAGNERTUNING high-performance intercooler has got a new competition core (Tube Fin) with the dimensions 600 mm x 167 [101] mm x 125 [90] mm [stepped] / 23,6 Inch x 6,6 [4] Inch x 4,9 [3,5] Inch [stepped], which was developed especially for the requirements of the VW Polo GTI. This high-performance core offers an 24 % larger frontal surface and 73 % more core volume compared to the stock intercooler.The aluminum cast endtanks were designed in CAD and optimized in CFD simulations (for an ideal internal airflow). The result is a excellent cooling property with a minimal back pressure. The newly developed competition high-performance core is very light and provides the adjoining components (for example the watercooler) enough air flow. That`s why this kit is perfect for racing use. An optimal cooling effect of the charged air with a significant increase in performance!An anti-corrosion powder coating with perfect heat-conducting properties protects the WAGNERTUNING intercooler from all environmental influences, so a lasting and optimal cooling effect can be guaranteed. The installation is done by replacing the original intercooler and is easy to perform (plug and play). All our products are subject to a continuous quality monitoring.Inlet diameter: Ø60 mm/2,36 Inch ; Outlet diameter Ø60 mm/2,36 InchDimensions stock intercooler:700 mm x 115 mm x 80 mm / 27,5 Inch x 4,5 Inch x 3,15 InchV = 6,44 L / 393 Inch³A = 805 cm²/ 124,7 Inch²Dimensions WAGNERTUNING intercooler:600 mm x 167 [101] mm x 125 [90] mm [stepped] / 23,6 Inch x 6,6 [4] Inch x 4,9 [3,5] Inch [stepped]V = 11,14 L / 680 Inch³A = 1002 cm²/ 155 Inch²kit comes with:1 intercooler2 silicone hoses (black)1 mounting material1 installation instruction

Updated Competition Gen.2 Intercooler Kit for VAG-models with 2,0T(F)SI engine of 1st & 2nd generation.This Competition Intercooler has the following core size (610mm x 440mm x 65mm), providing a 10% larger frontalarea and 50% more volume compared to the original Audi S3 intercooler.WAGNERTUNING competition core with high cooling performance and light weight (9,2KG). Optimized by CAD, the new competition high speed core and cast aluminum endtanks give this intercooler excellent cooling properties. Flow analyses and simulations were created to optimise the design for best possible internal airflow. This intercooler is the best choice when it comes to performance gains and low intake temperatures. A lot less pressure drop then OEM intercooler. Anti corrosion protective coating with perfect thermal heat dissapating character. Optimal cooling with clearly more power. Kit is ready for installation, 100% perfect fit. Fitment is easy, replacing the OEM intercooler. All of our products undergo rigorous quality control. Including TÜV certificate.Gen.2 new features:-CNC machined hose connection for maximum pressure stability.-Internal air guide inside the endtank for uniform air distribution.The WAGNERTUNING Competition Intercooler Kit made for the VAG 2.0 TFSI / TSI engine fits in to:• Audi A3 8P 1,8 TFSI 118KW/160PS (2007-2012) / except for convertible models with original intake!• Audi A3 8P 2,0 TFSI 147KW/200PS (2004-2012) / except for convertible models with original intake!• Audi S3 8P 195KW/265PS (2006-2012)• Audi TT 8J 1,8 TSI 118KW/160PS (2008-2014)• Audi TT 8J 2,0 TFSI 147-155KW/200-211PS (2006-2014) (does not Fit cars with Engine Code CETA; CESA)• Audi TTS 8J 200KW/272PS (2008-2014) (does not Fit cars with Engine Code CETA; CESA)• Volkswagen Golf 5 GTI (incl. ED 30) 147-169KW/200-230PS (2004-2008)• Volkswagen Golf 6 GTI (incl. ED 35) (Cabrio) 155-173KW/211-235PS (2009-2013) (USA - does not Fit cars with Engine Code CBFA 2011+)• Volkswagen Golf 6 R (incl. Cabrio) 199KW/270PS (2009-2013)• Volkswagen Scirocco 3 2,0 TSI 147-162KW/200-220PS (2008-2015)• Volkswagen Scirocco 3 R 195-206KW/265-280PS (2009-2015)• Volkswagen EOS 2,0 TFSI 147KW/200PS (2006-2009)• Volkswagen EOS 2,0 TFSI 155KW/211PS (2009-2014)• Volkswagen Jetta 5 2,0 TFSI 147KW/200PS (2005-2010)• Volkswagen Jetta 6 2,0 TSI 147-155KW/200-211PS (2010-2014)• Volkswagen Passat B6 1,8 TSI 118KW/160PS (2007-2010)• Volkswagen Passat B6 2,0 TSI 147KW/200PS (2005-2010)• Volkswagen Passat B7 1,8 TSI 118KW/160PS (2010-2012)• Volkswagen Passat B7 2,0 TSI 155KW/211PS (2010-2014)• Volkswagen Passat CC 1,8 TSI 118KW/160PS (2008-2012)• Volkswagen Passat CC 2,0 TFSI 147KW/200PS (2008-2010)• Volkswagen Passat CC 2,0 TSI 155KW/211PS (2010-2014)• Volkswagen Beetle 2,0 TSI 147-162KW/200-220PS (2011-2016)• Skoda Octavia 1Z 1,8 TSI 118KW/160PS (2008-2013)• Skoda Octavia 1Z MK2 RS 147KW/200PS (2005-2009)• Skoda Octavia 1Z MK2 RS 155KW/211PS (2009-2013)• Skoda Suberb 3T 2,0 TSI 147KW/200PS (2010-2013)• Seat Leon 1P 1,8 TFSI 118KW/160PS (2009-2012)*• Seat Leon 1P 2,0 TFSI 136KW/185PS (2005-2006)*• Seat Leon 1P FR 147KW/200PS (2006-2009)*• Seat Leon 1P FR 155KW/211PS (2009-2012)*• Seat Leon 1P Cupra 177KW/241PS (2007-2011)*• Seat Leon 1P Cupra R 195KW/265PS (2009-2012)*• Seat Leon 1P Copa Edition 210KW/286PS (2008)*• Seat Leon 1P Cupra R310 LE 228KW/310PS (2009-2012)*• Seat Leon 1P Cupra R310 WCE 228KW/310PS (2009-2012)** slight modifications to the vehicle requiredPackage:1 charge air cooler2 silicone Hoses4 hose clamps1 aluminium Adapter1 installation instructions1 TÜV certificate

High performance at the highest levelThis Competition Intercooler has the following core size (640mm x 410mm x 65mm), providing 90% more volume compared to the original intercooler. Our engineers have increased the intercooler core size and efficiency, as well as improving the endtank design to remove any OEM bottlenecks, resulting in increased flow rating and charge cooling properties. This Golf MK7 intercooler uses our award winning WAGNERTUNING competition intercooler core which is made specifically for this application. Constructed of the highest quality tube and fin intercooler cores with inside turbulators combined with cast aluminum endtanks optimized by CFD for best possible internal airflow. With the help of additional air guides, inside inlet, an uniform filling of the intercooler is provided. The result is excellent cooling properties and a lot less pressure drop then the stock intercooler. Despite of it´s size the weight of the complete intercooler is only 8,9kg. The inlets and outlets of the intercooler have been increased to Ø 70mm, so this kit comes with reinforced silicone hoses. This Intercooler Kit is the best choice when it comes to performance gains and low intake temperatures and also the right thing for racing. All of our intercooler use an anti corrosion protective coating with perfect thermal heat dissapating character. Optimal cooling with clearly more power. Kit is ready for installation, 100% perfect fit. Fitment is easy, replacing the OEM intercooler. All of our products undergo rigorous quality control.The WAGNERTUNING Competition Intercooler Kit made for the VAG 1,8TSI - 2.0 TSI engine fits in to:- VW Golf 7+7.5 GTI 2,0 TSI 162-228KW/220-310PS (incl. facelift- performance, clubsport[S] and TCR models)- VW Golf 7+7.5 R 2,0 TSI 221-228KW/300-310PS (incl. facelift models)- VW T-Roc 2,0TSI 4Motion 140KW/190PS (not included to the TÜV certificate)- VW T-Roc R 4Motion 221KW/300PS (not included to the TÜV certificate)- VW Arteon 2,0 TSI 140-206KW/190-280PS (only 7 Speed automatic transmission DSG)- Skoda Superb 3V 2,0TSI 162KW/220PS- Skoda Superb 3V 2,0TSI 206KW/280PSWith further modifications to the car, the intercooler fits also to:- Audi Q2 40TFSI 140KW/190PS* (not included to the TÜV certificate)- Audi SQ2 221KW/300PS (not included to the TÜV certificate)- Audi A3 8V 1,8TSI 132KW/180PS*- Audi A3 8V 2,0TSI 140KW/190PS*- Audi S3 8V 2,0TSI 221-228KW/300-310PS*- Audi TT 8S 2.0TFSI 169KW / 230PS*- Audi TTS 8S 2,0TSI 228KW/310PS*- Seat Leon 5F Cupra 2,0TSI 195-272KW/265-370PS* (incl. Cupra ST 265-370 & Cupra R)- Skoda Octavia 5E 1,8TSI 132KW/180PS*- Skoda Octavia 5E RS 2,0TSI 162-180KW/220-245PS*Because of the additional adjustments the installation effort increases to a total of approx. 5-6 hours.:kit comes with:1 charge air cooler2 silicone hoses2 hose clamps1 mounting material1 installation instruction1 TÜV certificate (excluding OPF-models)

High performance at the highest levelThis Competition Intercooler has the following core size (620mm x 440mm x 65mm), providing 132% more volume compared to the original intercooler. Our engineers have increased the intercooler core size and efficiency, as well as improving the endtank design to remove any OEM bottlenecks, resulting in increased flow rating and charge cooling properties. This Golf MK8 intercooler uses our award winning WAGNERTUNING competition intercooler core which is made specifically for this application. Constructed of the highest quality tube and fin intercooler cores with inside turbulators combined with cast aluminum endtanks optimized by CFD for best possible internal airflow. With the help of additional air guides, inside inlet, an uniform filling of the intercooler is provided. The result is excellent cooling properties and a lot less pressure drop then the stock intercooler. Despite of it´s size the weight of the complete intercooler is only 9,2kg. The inlets and outlets of the intercooler have been increased to Ø 70mm, so this kit comes with reinforced silicone hoses. This Intercooler Kit is the best choice when it comes to performance gains and low intake temperatures and also the right thing for racing. All of our intercooler use an anti corrosion protective coating with perfect thermal heat dissapating character. Optimal cooling with clearly more power. Kit is ready for installation, 100% perfect fit. Fitment is easy, replacing the OEM intercooler. All of our products undergo rigorous quality control.The WAGNERTUNING Competition Intercooler Kit made for the VAG 2.0 TSI (EA888 Gen.4 engine) fits in to:VW Golf VIII Typ CD2.0 GTI 180kW / 245PSVW Golf VIII Typ CD2.0 GTI Clubsport 220KW/300PSVW Golf VIII Typ CD2.0 R 235KW/320PSCupra Formentor VZ 2.0TSI 180kW / 245PSCupra Formentor VZ 2.0TSI 228kW / 310PSSkoda Octavia 2.0 TSI RS 180kW / 245PSkit comes with:1 charge air cooler2 silicone hoses4 hose clamps1 mounting material1 installation instruction

Competition Intercooler Kit EVO3 for BMW E82 E90The BMW Competition Intercooler Kit EVO III has the following core dimensions (510mm x 303mm x 180mm / stepped, 20,65L)(20Inch x 11,9Inch x 7,09Inch / stepped, 1260,14Inch³) . The high performance intercooler core provides a 162% larger frontal area and 182% more volume compared to the stock mounted intercooler. Our engineers have increased the intercooler core size and efficiency, as well as improved the endtank design to remove any OEM bottlenecks, resulting in increased flow rating and charge cooling properties. We use our award winning WAGNERTUNING Competition Intercooler Core which is made specifically for this application. Constructed of the highest quality Tube Fin intercooler cores with inside turbulators combined with cast aluminum endtanks optimized by CFD for best possible internal airflow. The stock click connections have been eleminated and increased to a connection diameter of Ø70mm/2,756Inch ( for In- and Outlet, so this kit comes with reinforced silicone hoses. The result is excellent cooling properties and a lot less pressure drop then the stock intercooler. Despite of it´s size the weight of the complete intercooler is only 13,2kg. This Intercooler Kit is the best choice when it comes to performance gains and low intake temperatures and also the right thing for racing. All of our intercooler use an anti corrosion protective coating with perfect thermal heat dissapating character. Optimal cooling with clearly more power. Kit is ready for installation, 100% perfect fit. Easy installation, only some little adjustments at the plastic cooler support are necessary. All of our products undergo rigorous quality control.The BMW Competition Intercooler Kit EVO III from WAGNERTUNING fits to the following cars with N54 & N55 engine:BMW 335 (x)i E90/E91/E92/93 2006-2011 (without ACC)BMW 335is E92 2009-2013 (without ACC)BMW 135i E82/E88 2007-2013 (without ACC)BMW 1erM E82 2011-2013 (without ACC)kit comes with:1 intercooler black2 silicone hoses, HD1 aluminum adapter1 mounting material1 installation instruction

Competition - Radiator - Kit for the BMW B48 & B58 EngineFits plug and play to following models:BMW 1er F20/F21 LCI from 09/2015 - 120i, 125i, M140iBMW 2er F22/F23 LCI from 09/2016 - 220i, 230i, M240iBMW 3er F30/F31/F34/F35 LCI from 09/2014 - 320i, 330i, 340iBMW 4er F32/F33/F36 LCI from 05/2016 - 420i, 430i, 440iThe 2.0 Liter B48B20 and 3.0 Liter B58B30M0 turbo engine of the specified BMW models is equipped with an indirect charge-air cooling circuit. So the cooling of the charged air is not realized by the ambient air as cooling medium (as usual), but made with its own cooling water circuit. A reduction of the temperature of the cooling water is directly equated with an improved cooling performance of the charged air. This is exactly where the advantages of the WAGNERTUNING upgrade radiator comes into play. The new developed competition racing core of the WAGNERTUNING high performance radiator increase the radiator volume of the OEM water cooler by a total of 117 %. The calculated ratio between the inner and outer cooling surface generates a maximum heat transfer and allows at the same time enough air flow for the surrounding components (for example the engine radiator) for its own heat exchange. Furthermore, using an increased amount of cooling water, the entire system thermics can be kept at a lower level over a longer period of time.All WAGNERTUNING radiators are equipped with a heat-conductive anti corrosion coating to ensure a lasting cooling effect. The plug & play installation of the system is simple and easy to perform (an installation instruction is included as well).Dimensions OEM radiator: 576 mm x 495 mm x 27 mm V = 7,70 Liter A = 2851 cm² Dimensions WT radiator:524 mm x 468 mm x 68 mmV = 16,70 LiterA = 2454 cm²

The 3.0 Liter S55B30 turbo engine of BMW M2 Competition / M3 / M4 models is equipped with an indirect charge-air cooling circuit. So the cooling of the charged air is realized by a watercooled intercooler which will be replaced by this WagnerTuning high-performance intercooler. The WAGNERTUNING high-performance intercooler has got a new competition core (Tube Fin) with the external core dimensions 287 mm x 185 mm x 115 mm / 11,3Inch x 7,3Inch x 4,5Inch. This intercooler core was directly developed for the high requirements of the S55 engine and offers 114 % more external core volume compared to the stock intercooler. The calculated ratio between the inner and outer cooling surface generates a maximum heat transfer and at the same time the best possible internal air flow. The aluminum cast endtanks were designed in CAD and optimized in CFD simulations. The result is an excellent cooling property with a minimal back pressure. That`s why this kit is also perfect for racing use. An optimal cooling effect of the charged air with a significant increase in performance! All WAGNERTUNING intercooler are equipped with a heat-conductive anti corrosion coating to ensure a lasting cooling effect. The plug & play installation of the system is simple and easy to perform (an installation instruction is included as well). core dimensions stock intercooler:276 mm x 136 mm x 76 mm / 10,9Inch x 5,3Inch x 3,0InchV = 2,85 Liter core dimensions WT intercooler:287 mm x 185 mm x 115 mm / 11,3Inch x 7,3Inch x 4,5InchV = 6,10 Liter  KEY FEATURES significantly better cooling performance less pressure drop more power and torque for your engine mechanical discharge of the turbocharger 100% pressure resistance 100% Plug and Play up to 4 years warranty APPLICATIONS  BMW M2/M3/M4 S55

Competition Radiator Kit for the BMW F80-82-83 M3/M4 The 3.0 Liter S55B30 turbo engine for BMW M3/M4 models is equipped with an indirect charge-air cooling circuit. So the cooling of the charged air is not realized by the ambient air as cooling medium (as usual), but made with its own cooling water circuit. A reduction of the temperature of the cooling water is directly equated with an improved cooling performance of the charged air. This is exactly where the advantages of the WAGNERTUNING upgrade water cooler comes into play.The new developed competition racing cores of the WAGNERTUNING high performance water coolers increase the radiator volume of the OEM water coolers by 89% for front mounted and 94% for side mounted. The calculated ratio between the inner and outer cooling surface generates a maximum heat transfer and allows at the same time enough air flow for the surrounding components (for example the engine water cooler) for its own heat exchange. The water coolers are equipped with a heat-conductive anti corrosion coating to ensure a lasting cooling effect. The plug & play installation of the system is simple and easy to perform (an installation instruction is included as well). Dimensions OEM front mounted radiator:590 mm x 308 mm x 25 mm / 23,2Inch x 12,1Inch x 1,0InchV = 4,5 LiterA = 1817 cm² / 280,7Inch² Dimensions WT front mounted radiator:568 mm x 468,4 mm x 32 mm / 22,4Inch x 18,4Inch x 1,26InchV = 8,5 Liter (+89%)A = 2660,5 cm² / 412,2Inch² (+46,4%) Dimensions OEM side mounted radiator:250 mm x 165 mm x 40 mm / 9,8Inch x 6,5Inch x 1,6InchV = 1,65 LiterA = 412,5 cm² / 63,7Inch² Dimensions WT side mounted radiator:252 mm x 188 mm x 68 mm / 9,9Inch x 7,4Inch x 2,7InchV = 3,2 Liter (+94%)A = 473,8 cm² / 73,3Inch² (+14,9%) Kit comes with:1x front mounted radiator (low-temperature circuit)1x side mounted radiator (low-temperature circuit)1x carbon air shroud for side mounted radiator1x mounting material1x installation instruction

This Competition intercooler has the following core size (520mm x 210mm x 150mm / stepped = 13,572 cm³ ), providing a 85% larger frontal area and 90% more volume compared to the original intercooler. Our engineers have increased the intercooler core size and efficiency, as well as improved the end tank design to remove any OEM bottlenecks, resulting in increased flow rating and charge cooling properties. Wagner-Tuning "Competition" Core with high cooling performance and light weight (7,4kg) combined with cast aluminum optimized by CAD. Flow analyses and simulations were created to optimise the design for best possible Internal Airflow. This intercooler is the best choice when it comes to performance gains and low intake temperatures. A lot less pressure drop then OEM Intercooler. Anti Corrosion protective Coating with perfect thermal heat dissapating character. Optimal cooling with clearly more power. Kit is ready for installation, 100% perfect fit. Fitment is easy, replacing the OEM intercooler. All of our products undergo rigorous quality control. Fits the following models: BMW 335 (x)i E90/E91/E92/93 2006-2011 BMW 335is E92 2009-2013 BMW 135i E82/E88 2008-2013 BMW 1erM E82 2011-2013

The BMW Intercooler Kit EVO II Competition has the following core dimensions (520mm x215mm x145mm /stepped 13.840cm³ / Stock IC 510mm x130mm x110mm, 7.293cm³). The high performance intercooler core provides a 68% larger frontal area and 90% more volume compared to the stock mounted intercooler. Our engineers have increased the intercooler core size and efficiency, as well as improved the end tank design to remove any OEM bottlenecks, resulting in increased flow rating and charge cooling properties. Despite of it´s size the weight of the complete intercooler is only 8,6kg. Constructed of the highest quality Tube Fin intercooler cores with inside turbulators combined with cast aluminum endtanks optimized by CFD for best possible internal airflow. This intercooler kit is the best choice when it comes to performance gains and low intake temperatures. Directly designed for the high requirements of BMW 135i and 335i. packing list:1 intercooler1 mounting material1 installation instruction  KEY FEATURES A lot less pressure drop then stock intercooler. Maximum cooling performance with clearly more power. Anti corrosion protective coating with perfect thermal heat dissapating character. Ready for installation (plug & play), only replacing the stock intercooler. APPLICATIONS BMW 114i F20 / F21 75KW/102PS (2012-2015) BMW 116i F20 / F21 100KW/136PS (2011-2015) BMW 116i F20 / F21 80KW/109PS (2015+) BMW 118i F20 / F21 125KW/170PS (2011-2015) BMW 118i F20 / F21 100KW/136PS (2015+) BMW 120i F20 / F21 130KW/177PS (2014-06/2016) BMW 125i F20 / F21 160KW/218PS (2012-06/2016) BMW M135i(x) F20 / F21 235-240KW/320-326PS (2011-2016) BMW 114d F20 / F21 70KW/95PS (2012+) BMW 116d F20 / F21 85KW/116PS (2011+) BMW 118d(x) F20 / F21 105-110KW/143-150PS (2011+) BMW 120d(x) F20 / F21 135-140KW/184-190PS (2011+) BMW 125d F20 / F21 160-165KW/218-224PS (2012+) BMW 218i F22 / F23 100KW/136PS (2015+) BMW 220i F22 / F23 135KW/184PS (2014-06/2016) BMW 228i(x) F22 / F23 180KW/245PS (2014-06/2016) BMW M235i(x) F22/F23 240KW/326PS (2014-2016) BMW M2 F87 272KW/370PS (2016+) BMW 218d F22 / F23 103-110KW/143-150PS (2014+) BMW 220d(x) F22 / F23 135KW/184PS (2014+) BMW 225d F22 / F23 165KW/224PS (2014+) BMW 316i F30 / F31 / F34 100KW/136PS (2011-2015) BMW 318i F30 / F31 / F34 100KW/136PS (2015+) BMW 320i(x) F30 / F31 / F34 135KW/184PS (2011-2015) BMW 328i(x) F30 / F31 / F34 180KW/245PS (2011-2015) BMW 335i(x) F30 / F31 / F34 235KW/320PS (2011-2015) BMW 316d F30 / F31 / F34 85KW/116PS (2012+) BMW 318d(x) F30 / F31 / F34 105KW/143PS (2012+) BMW 320d(x) F30 / F31 / F34 135KW/184PS (2011+) BMW 325d F30 / F31 / F34 160KW/218PS (2013+) BMW 330d(x) F30 / F31 / F34 190KW/258PS (2012+) BMW 335d(x) F30 / F31 / F34 230KW/313PS (2013+) BMW 420i(x) F32 / F33 / F36 135KW/184PS (2013-2015) BMW 428i(x) F32 / F33 / F36 180KW/245PS (2013-2016) BMW 435i(x) F32 / F33 / F36 225KW/306PS (2013-2016) BMW 418d F32 / F33 / F36 105-110KW/1143-150PS (2014+) BMW 420d(x) F32 / F33 / F36 135-140KW/184-190PS (2013+) BMW 425d F32 / F33 / F36 160-165KW/218-224PS (2014+) BMW 430d(x) F32 / F33 / F36 190KW/258PS (2013+) BMW 435d(x) F32 / F33 / F36 230KW/313PS (2013+)

Stepped Competition Intercooler Core. Size 520 x 210 x130, 11.752cm³ Volume (OEM 510x130x110mm, 7293cm³ Volume). Approx. 85% bigger surface over OEM IC. CAD / FEM optimized Aluminum Cast Endtanks. Plug & Play Installation using the stock plumming, no cutting or bumper removal required. Weight 6,6kg Including TÜV certificate! Fits the following models: BMW 114i F20 / F21 75KW/102PS (2012-2015) •BMW 116i F20 / F21 100KW/136PS (2011-2015) •BMW 116i F20 / F21 80KW/109PS (2015+) •BMW 118i F20 / F21 125KW/170PS (2011-2015) •BMW 118i F20 / F21 100KW/136PS (2015+) •BMW 120i F20 / F21 130KW/177PS (2014-06/2016) • BMW 125i F20 / F21 160KW/218PS (2012-06/2016) • BMW M135i(x) F20 / F21 235-240KW/320-326PS (2011-2016) • BMW 114d F20 / F21 70KW/95PS (2012+) • BMW 116d F20 / F21 85KW/116PS (2011+) • BMW 118d(x) F20 / F21 105-110KW/143-150PS (2011+) • BMW 120d(x) F20 / F21 135-140KW/184-190PS (2011+) • BMW 125d F20 / F21 160-165KW/218-224PS (2012+) • BMW 218i F22 / F23 100KW/136PS (2015+) • BMW 220i F22 / F23 135KW/184PS (2014-06/2016) • BMW 228i(x) F22 / F23 180KW/245PS (2014-06/2016) • BMW M235i(x) F22/F23 240KW/326PS (2014-2016) • BMW M2 F87 272KW/370PS (2016+) • BMW 218d F22 / F23 103-110KW/143-150PS (2014+) • BMW 220d(x) F22 / F23 135KW/184PS (2014+) • BMW 225d F22 / F23 165KW/224PS (2014+) • BMW 316i F30 / F31 / F34 100KW/136PS (2011-2015) • BMW 318i F30 / F31 / F34 100KW/136PS (2015+) • BMW 320i(x) F30 / F31 / F34 135KW/184PS (2011-2015) • BMW 328i(x) F30 / F31 / F34 180KW/245PS (2011-2015) • BMW 335i(x) F30 / F31 / F34 235KW/320PS (2011-2015) • BMW 316d F30 / F31 / F34 85KW/116PS (2012+) • BMW 318d(x) F30 / F31 / F34 105KW/143PS (2012+) • BMW 320d(x) F30 / F31 / F34 135KW/184PS (2011+) • BMW 325d F30 / F31 / F34 160KW/218PS (2013+) • BMW 330d(x) F30 / F31 / F34 190KW/258PS (2012+) • BMW 335d(x) F30 / F31 / F34 230KW/313PS (2013+) • BMW 420i(x) F32 / F33 / F36 135KW/184PS (2013-2015) • BMW 428i(x) F32 / F33 / F36 180KW/245PS (2013-2016) • BMW 435i(x) F32 / F33 / F36 225KW/306PS (2013-2016) • BMW 418d F32 / F33 / F36 105-110KW/1143-150PS (2014+) • BMW 420d(x) F32 / F33 / F36 135-140KW/184-190PS (2013+) • BMW 425d F32 / F33 / F36 160-165KW/218-224PS (2014+) • BMW 430d(x) F32 / F33 / F36 190KW/258PS (2013+) • BMW 435d(x) F32 / F33 / F36 230KW/313PS (2013+)