Монтажни части за Ford Mondeo MK 2 Saloon (BFP) 2.5 24V - 170 коня бензин SEB, SEC - онлайн магазин
170 к.с - бензин
06.2000 - 09.2000
-
M8 stud bolt for all TFSI and TSI Gen.2 Cylinderheads made by ARP.
This studs are failing very often during dismounting of the exhaust manifold. (Stud is mounted in the head)
ARP has developed a special alloy for this application.
Further advantages of these ARP studs:- 100% reusable
- extrem heat resistant
- keeps manifold seal
- non rusting
Price COMPLETE studs Kit together with ARP nut and washer as shown on picture.
It will fit following engines:
- 2.0L TFSI engines
- 2.0L TSI engines -
Turbocharger assembly and sealing kit for all 2.0L TSI engines as used in Golf 7 GTI, S3 und Golf 7 R and many more.
Contains all required parts for mounting the loader.
- Stud bolt + nuts downpipe
- Stud bolts + nuts exhaust manifold
- Gsaket downpipe
- Gasket exhaust manifold
- Copper sealing rings
- Oilline sealing
-
Turbocharger assembly and sealing kit for all 1.8T engines.
Contains all required parts for mounting the loader.
- Stud bolt + nuts downpipe
- Stud bolts + nuts exhaust manifold
- Gsaket downpipe
- Gasket exhaust manifold
- Copper sealing rings
- Oilline sealing
Please choose your engine
-
This kit allows you to drive the K04-064 turbocharger from the 2.0L TFSI on your 1.8T engine.
Through the TFSI integral charger you have the advantage that the exhaust manifold and turbocharger are one component. As a result, leakage problems or loose screw connections are a thing of the past.
The slide bearing of the 064 Turbo is significantly more wear-free than the ball bearing of Garret or EFR loaders.
Due to the downmount manifold no heat is reflected on the turbo as it hangs under the manifold.
Internal Wastgates & ready-mounted pressure cans save a lot of money and nerves, since no own bracket must be built, as is often the case with topmount manifolds with Garrett and EFR.
The original engine compartment look is retained. Since the intake pipe even fits under the engine cover, nothing indicates a conversion.
features:
- Original optic
- Perfect fit
- Mounting material made of temperature-resistant stainless steel alloy
- Flow-efficient transitions from cylinder head to manifold
- Individual power of up to 500 hp with our V3 Upgrade Turbo with early response
- Milled from the solid
What you get:
- Bolt-on adapter incl. 5 clamping plates and large centering strip
- Multi-layer metal seals for 1.8T for adapters & manifolds
- All required studs, screws, self-locking copper nuts, anti-vibration washers
- fit all transversely mounted 1.8T engines
-
Turbocharger assembly and sealing kit for all 2.0L TFSI & 2.0L TSI engines of the second generation as used in Golf 5 GTI, Golf 6 GTI, S3 und Golf 6 R and many more.
Contains all required parts for mounting the loader.
- Stud bolt + nuts downpipe
- Stud bolts + nuts exhaust manifold
- Gsaket downpipe
- Gasket exhaust manifold
- Copper sealing rings
- Oilline sealing
-
This closure plate is used to close the connection for engine ventilation on the turbocharger.
Ideal for the installation of a Catchtank system with external crankcase ventilation.
Fits all VW Golf 5 & 6 2.0L TFSI, Audi A3 and all other 2.0L TFSI transverse engines
6061 aluminum alloy plate, CNC machined and black anodized. -
When running a big turbo setup on a 2.0L TFSI this flange makes plumbing a -10AN oil line simple. Manufactured in house out of 6061 aircraft grade aluminum with precise CNC machines. Sold in a kit with a -10AN adapter flange, o ring, and two stainless steel bolts. Finished in a bright red anodize.
Features:
-6061 aluminum
-10AN male outlet
-including O-Ring and bolts
Fits 2.0L TSI engines with chain driven.
Click here for our hose systems! -
2.0L TSI EA888 Evo4 Gasket / combustion ring for turbocharger.
This gasket is located directly at the outlet of the turbocharger and should always be replaced at Downpipe - or turbocharger change.
A leaking exhaust system directly at the turbocharger can lead to poor engine running or error messages up to the engine fire!(Turbocharger is only used to illustrate the mounting position)You need this kit if you want to install a K04 turbocharger on your 2.0L TSI.
The kit consists of a 90 degree silicone hose for connection to the pressure tube to the intercooler and the aluminum tube from the valve cover to the turbocharger.
Seal, clamps and screws are also included.
2.0L TSI EA888 (MQB) Gasket / combustion ring for turbocharger.
This gasket is located directly at the outlet of the turbocharger and should always be replaced at Downpipe - or turbocharger change.
A leaky exhaust system directly at the turbocharger can lead to a bad engine run or error messages up to the engine fire!(Turbocharger is only used to show the mounting position)2.0L TSI Clamp for Turbocharger
Should be replaced after each tightening.
A leaking exhaust system directly at the turbocharger can lead to a bad engine run or error messages up to engine fireJust convert the oil and water lines to Dash? Other turbocharger installed and the OEM performance no longer fit? No problem! With our billet aluminum oil connector for your CEP & CZG block you can easily convert to Dash lines. Individual and always replaceable or expandable.
The best part about our connector is that they work with the OEM o-ring and are compatible with every Dash 4 fitting on the market.
Features:
- Billet 6061 aluminum
- easy connection to EA855 block
- no tinkering
- clean solution
- OEM O-ring for sealing
- Dash 4
- Custom Dash line
2.5L TFSI EA855 Clamp for turbocharger.
This clamp is located directly at the outlet of the turbocharger and should always be replaced at Downpipe - or turbocharger change.
A leaking exhaust system directly at the turbocharger can lead to poor engine running or error messages and even engine fire!Turbocharger mounting and gasket kit for your 2.5L TFSI EA855evo engine like RS3, TTRS or RSQ3.
Contains all necessary parts to mount the turbocharger. We recommend replacing the gaskets every time you disassemble or reassemble.
Among other things:
- Stud bolt + nuts manifold
- Gasket manifold
- Copper gaskets
- Oil line gasket
Just convert the oil and water lines to Dash? Other turbocharger installed and the OEM performance no longer fit? No problem! With our billet aluminum oil connector for your DAZA & DNW block you can easily convert to Dash lines. Individual and always replaceable or expandable.
The best part about our connector is that they work with the OEM o-ring and are compatible with every Dash 4 fitting on the market.
Features:
- Billet 6061 Aluminum
- easy connection to the EVO block
- no tinkering
- clean solution
- OEM O-ring for sealing
- Dash 4
- Customized Dash line
Just convert the oil and water lines to Dash? Other turbocharger installed and the OEM performance no longer fit? No problem! With our billet aluminum water connection for your DAZA & DNW block you can easily convert to Dash lines. Individual and always replaceable or expandable.
The best part about our connector is that they work with the OEM o-ring and are compatible with every Dash 6 fitting on the market.
Features:
- Billet 6061 Aluminum
- easy connection to the EVO block
- no tinkering
- clean solution
- OEM O-ring for sealing
- Dash 6
- Customized Dash line
This billet port cover closes the port of the rear breather on the turbocharger
This is perfect for installing a catch can system.
Will fit all 2.5L TFSI like RS3 and TT RS
Made of 6061 aircraft aluminum and red coated.Audi 2.7L Biturbo manifold gasket/combustion ring.
Gasket between manifold and turbocharger.
The gasket should be renewed with every assembly.
For the Biturbo 2 gaskets are needed. Price per gasket.
Assembly and gasket kit for a turbocharger in your 4.0L TFSI EA825 engine such as installed in the RSQ8, Cayenne or Urus.
Contains all necessary parts to mount the supercharger. We recommend replacing the gaskets every time you disassemble or reassemble.
Among other things:
- Combustion rings manifold
- Combustion rings Downpipe
- Y-pipe gasket
- Heat resistant nuts Y-pipe
- O-rings oil lines
- O-rings water pipes
- Gasket turbo inlet
Special screw kit for Garrett turbochargers to fix the exhaust side to the fuselage assembly.
6 high strength and temperature resistant screws with inch thread. 2 matching retaining brackets.
The Garrett screw kit fits all Garrett loaders such as
T3
T4
GT25R
GT28R
GT30R
GT35R GT
25R
GT28R
GT30R
GT35R
and of course the new GTX series.
In principle for all turbos with 6 screw mounting.
Not suitable for special cases with V-band or GT32, GT40, GT42.
Garret part number 449028-0001/ZSealing plug for securely closing the opening of the exhaust gas temperature probe, such as on the 2.5L TFSI CEPA manifold.
- Common M12x1 fine thread exhaust gas temperature probes
- With practical hexagon socket
- Made of 304 stainless steel
- Pressure stable up to 200 bar
High quality turbocharger oil inlet-line for installation of a turbocharger, for example in Polo G40, G60, 1.8T, VR6, TFSI, 16V and many more.
The oil lines with Teflon core (extremely temperature resistant) is one meter long and in Dash 4. Included are the matching Dash 4 PFTE fittings, as well as the matching Dash 4 Alu Banjo and 2 Alu sealing rings.
High quality turbocharger oil returnline for installing a custom turbocharger, for example in Polo G40, G60, 1.8T, VR6, TFSI, 16V and many more.
The oil line consists of a synthetic rubber layer, a steel layer and an outer nylon protective layer. This combination makes the hoses much more flexible than pure steel flex hoses. The line is one meter long and in Dash 10. Included are the matching Dash 10 fittings, as well as the matching Dash 10 aluminum flanges for loader and oil pan and 2 gaskets.
The Forge Turboblanket is designed to isolate the radiant heat generated by the turbocharger. These turbo blankets have been extensively tested in the toughest environments, road races and on the track.
Forge designed this product to withstand the harshest environmental conditions and to protect and extend your engine components.
In addition, the heat of the exhaust gases contained in the hot side of the turbocharger is kept away from the cool side and the intake path. This results in cooler air with more oxygen and the engine thus achieves more power. Attaching the turbo-screw also prevents heat from being applied to the surrounding engine components by the turbocharger.
The Turboblanket loses its flexibility during the first heat cycles and the material hardens. After attaching it should therefore not be removed.
features:
- Stainless steel rivets in aerospace quality
- Stainless steel fasteners
- Carbon outer shell
- Inner core made of calcium-magnesium-silicate wool
- High temperature silica cloth
Inside surface:
Maximum temperature rating: 1180 °C
Continuous use restriction: 1050 °COutside area:
Limit for direct contact: 450 °C
Radiant heat limit: 675 °CGarrett Compressor housing clamp and bolt kit.
Turbos using 6 bolt mounting pad for CHRA to compressor housing assembly.
Includes 3 half circle clamps and 6 bolts.
Fits for all Garrett Compressor housing with short 2-bolt clamps.Special Garrett exhaust housing bolt kit to attach the exhaust side to the fuselage assembly.Special V-band clamp for mounting the exhaust housing to the fuselage assembly for Garrett GT42-GT45 turbochargers.
Suitable for the following turbochargers:- Garrett GT4294 - 731376
- Garrett GT4294R - 774595-4
- Garrett GT4294R - 774595-3
- Garrett GT4294R - 774595-2
- Garrett GT4294R - 774595-1
- Garrett GTX4294R - 800269-1
- Garrett GT4202 - 731376-2
- Garrett GT4202R - 774595-7
- Garrett GT4202R - 774595-5
- Garrett GT4202R - 774595-6
- Garrett GT4202R - 774595-8
- Garrett GTX4202R - 800269-2
- Garrett GT4508R - 742581-4
- Garrett GTX4508R - 800270-1
- Garrett GT4202R, TiAL 1.15ar
- Garrett GT4294R, TiAL 1.06ar
- Garrett GT4294R, TiAL 1.15ar
- Garrett GT4202R, TiAL 1.06ar
- Garrett GT4294R, TiAL 1.44ar
- Garrett GT4294R, TiAL 1.28ar
- Garrett GT4202R, TiAL 1.44ar
- Garrett GT4202R, TiAL 1.28ar
Aluminum adapter for our Thor G35-1050 supercharger.
CNC milled aluminum adapter for mounting a suction without Turbo Inlet. With this you can simply e.g. with a continuous 90mm suction, go directly to the compressor housing.
No tinkering with any hose connectors, or welding flanges to the turbocharger. Simply Plug'n'Play to screw. For the perfect seal, we have still incorporated an O-ring.
Features:
- For Garrett G35-1050
- O-ring seal for intake pipe
- Plug and Play connection to the loader
- CNC milled
Спирачна система - Ford Mondeo MK 2 Saloon (BFP) 2.5 24VЗатвориОкачване на колелата - Ford Mondeo MK 2 Saloon (BFP) 2.5 24VЗатвориКормилна система - Ford Mondeo MK 2 Saloon (BFP) 2.5 24VЗатвориЗадвижване на колелата - Ford Mondeo MK 2 Saloon (BFP) 2.5 24VЗатвориТрансмисия - Ford Mondeo MK 2 Saloon (BFP) 2.5 24VЗатвориРемъчно задвижване - Ford Mondeo MK 2 Saloon (BFP) 2.5 24VЗатвориЧасти за двигател - Ford Mondeo MK 2 Saloon (BFP) 2.5 24VЗатвориЧасти за цилиндров блок - Ford Mondeo MK 2 Saloon (BFP) 2.5 24VЗатвориГарнитури - Ford Mondeo MK 2 Saloon (BFP) 2.5 24VЗатвориОхладителна система - Ford Mondeo MK 2 Saloon (BFP) 2.5 24VЗатвориКлиматична система - Ford Mondeo MK 2 Saloon (BFP) 2.5 24VЗатвориОтопление и вентилация - Ford Mondeo MK 2 Saloon (BFP) 2.5 24VЗатвориФилтри - Ford Mondeo MK 2 Saloon (BFP) 2.5 24VЗатвориМасла и течности - Ford Mondeo MK 2 Saloon (BFP) 2.5 24VЗатвориЗапалителна система - Ford Mondeo MK 2 Saloon (BFP) 2.5 24VЗатвориДатчици и сензори - Ford Mondeo MK 2 Saloon (BFP) 2.5 24VЗатвориГоривна система - Ford Mondeo MK 2 Saloon (BFP) 2.5 24VЗатвориЕлектрическа система - Ford Mondeo MK 2 Saloon (BFP) 2.5 24VЗатвориСтартова система - Ford Mondeo MK 2 Saloon (BFP) 2.5 24VЗатвориПочистване на стъклата - Ford Mondeo MK 2 Saloon (BFP) 2.5 24VЗатвориАуспуси и гърнета - Ford Mondeo MK 2 Saloon (BFP) 2.5 24VЗатвориЕдрогабаритни части - Ford Mondeo MK 2 Saloon (BFP) 2.5 24VЗатвориСветлини - Ford Mondeo MK 2 Saloon (BFP) 2.5 24VЗатвориИнтериор - Ford Mondeo MK 2 Saloon (BFP) 2.5 24VЗатвориДобавки - Ford Mondeo MK 2 Saloon (BFP) 2.5 24VЗатвориТунинг - Ford Mondeo MK 2 Saloon (BFP) 2.5 24VЗатвориАвтоаксесоари - Ford Mondeo MK 2 Saloon (BFP) 2.5 24VЗатвориЗадължително оборудване - Ford Mondeo MK 2 Saloon (BFP) 2.5 24VЗатвориИнструменти - Ford Mondeo MK 2 Saloon (BFP) 2.5 24VЗатвориТехнически характеристикиОбщи данниОбщи сведения основни стойностиВид на управлението на двигателяАнгренажна веригаОбороти при макс. мощност6250 1/minОбороти при макс. въртящ момент4250 1/minМаксимален въртящ момент220 NmХод79,50 ммВътрешен диаметър на цилиндъра81,66 ммВентили за един цилиндър4Компенсация на луфта на вентилаХидроповдигачЪгъл на гнездото на вентила - всмукателен клапан45°Ъгъл на гнездото на вентила - изпускателен клапан45°Диаметър на стъблото на вентила - всмукателен клапан5,975 - 5,995 ммДиаметър на стъблото на вентила - изпускателен клапан5,950 - 5,970 ммКоличество на нужните запалителни свещи/нагревателни свещи6Последователност на запалване1-4-2-5-3-6Степен на сгъстяване9,70 :1Охладителна системаТермостатът отваря при температура92°Запалителна системаЗапалителна система стойностиРазстояние между електродите1,30 ммЗапалителни свещи/нагревателни свещи другиAWSF32FСистема за горивоСистема за гориво общи сведенияВид на моторното горивоOTTO 95 ROZОбработка на сместа обозначениеВпръскване на бензинОбработка на сместа производителMotorcraftКонтролни стойности за изгорелите газовеОбщи стойности, съществени за изгорелите газовеПоложение щепсел за диагнозаОбороти на празен ход при скоростната кутия675 - 775 1/minОбороти на празен ход при автоматична скоростна кутия675 - 775 1/minМинимална температура на моторното масло при AU80 °CСтойности за изгорелите газове бензинСъдържание на CO-при празен ход0,50 %Повишени обороти при празен ход2800 - 3100 1/minСъдържание на CO-при повишен празен ход0,30 %Максимално съдържание на HC-при празен ход100 ppmСтойност ламбда0,97 - 1,03 λДанни за ходовата частСпирачна уредбаИзмерения на спирачкатаДебелина на спирачния диск преден мост24,15 ммДебелина на спирачния диск граница на износване преден мост22,20 ммМаксимално странично биене на спирачния диск преден мост0,15 ммДебелина на спирачния диск заден мост20,00 ммДебелина на спирачния диск граница на износване заден мост18,00 ммМаксимално странично биене на спирачния диск заден мост0,15 ммСпирачен диск диаметър преден мост278,00 ммСпирачен диск диаметър заден мост252,00 ммСпирачно бутало диаметър преден мост60,00 ммСпирачно бутало диаметър заден мост36,00 ммЕлектроникаОбщи сведения за електрическата частНапрежение на акумулатора12 волтаКонсумативиКоличество запълващи вещества и спецификацииДвигателно масло с филтърНово запълване5,85 литраДвигателно масло с филтърКоличество за смяна5,50 литраВискозност моторно маслоWSS-M2C912-A15W-30Вискозност моторно маслоWSS-M2C913-ASAE 5W-30Спецификация двигателно маслоWSS-M2C913-A|WSS-M2C912-A1Масло за скоростната кутия1,90 литраСпецификация масло за скоростна кутияWSD-M2C200-CМасло за автоматична скоростна кутияНово запълване9,50 литраМасло за автоматична скоростна кутияКоличество за смяна6,50 литраСпецификация масло за автоматична скоростна кутияESP-M2C-166-HСпецификация масло за сервоуправлениетоESP-M2C-166-HАнтифризс автоматична скоростна кутия9,70 литраАнтифризсъс скоростна кутия9,50 литраСпецификация охладителна течностESD-M97B-49AСпирачна течност при смяна1,00 литраСпецификация спирачна течностDOT 4Средства за охлаждане климатична инсталация725 - 755 грамаСпецификация охлаждащи средстваR134aМасло климатична инсталация200 cm³Спецификация охлаждащо маслоWSH-M1C231-BОбем на резервоара за гориво61 литраОсветлениеПредни фаровеСветлини за дневно каранеПринадлежащи артикулиDAY1Задни фаровеВътрешни лампиИнтервали за смянаЗа сервизни данниВъздушен филтър интервал за смянана всеки 45.000 km / 3 годиниФилтър за гориво интервал за смянана всеки 90.000 km / 6 годиниЗапалителни свещи интервал за смянана всеки 90.000 km / 6 годиниСпирачна течност интервал за смянана всеки 2 годиниОхлаждащи средства за двигателя интервал за смянана всеки 10 годинивиолетовоЗатвор на радиатора - проверочен режимна всеки 4 годиниМоторно масло и филтър интервал за смянапри всеки сервизФилтър купе интервал за смянана всеки 15.000 km / веднъж годишноПоследно разгледани
-
Огромен избор Над 800 000 авточасти
-
Купи на кредит с ТБИ Минимална сума 150 лв.
-
Експресна доставка Наложен платеж и преглед
-
14 дни срок Връщане или замяна
ТОП производители
Ivan Minchev02 June 2024Иван Симонов02 June 2024wilhem marinov01 June 2024Dobrin Nikolov31 May 2024vip8810 vip881031 May 2024Boris Besarabov31 May 2024