Спортни гърнета BMW за мотор Honda VFR VFR 750 F (RC36) - 101 коня бензин - онлайн магазин
Honda VFR
101 к.с - бензин
09.1988 - 12.1993
Марка: Honda
Модел: VFR
Модиф.: VFR 750 F - бензин
Шаси: мотор
Година: 09.1988 - 12.1993
Задвижване: верига
Цил./Куб.: 4 цил. / 748 куб. см.
Мощност: 101 к.с / 74 kW
Kод двигател:
Гараж+
-
още
Информация:
Active Autowerke is proud to release the Active Autowerke Valved Rear Exhaust for the BMW G87 M2. While these cars have received rave reviews for their performance, the sound is a muffled one leaving the driver to wonder if they are really driving a BMW M-car. In order to solve this, Active Autowerke has created a full exhaust system for the G87 which comprises this rear axle-back valved exhaust, a mid-pipe with equal length x-pipe or single and a set of GESI catted downpipes. Together, this remake of the stock exhaust results in a G87 with an amazing sound. You will feel like you are driving a true M-car again.
At Active Autowerke, its not ONLY about making as much power as possible but to maximize the enjoyment of the drive. For over 40 years, power has been the end result of improved performance due to our relentless desire to develop a refined, quality product. This philosophy behind our performance parts is best represented by the introduction of G80/G82 BMW M3/M4 collection rear exhaust.
The Active Autowerke G87 rear exhaust was carefully engineered to increase the sound level over the factory M2 exhaust, while also allowing for optimum flow and resonance by reusing the actuators from the BMW valves. Every effort was made in addressing the overly quiet sound of the stock OEM exhaust while designing an exhaust worthy for an M car. We believe our rear exhaust combined with our mid-pipe and catted downpipes offers the best combination of sound and performance versus any other system on the market today. Available for both models, this axle-back exhaust gives your BMW the deep, throaty, growl a car of its caliber should have had from the factory!
PLEASE NOTE - we do offer a version of this rear exhaust for those who only wish to replace their stock rear section (so keeping stock midpipes) but there will be an additional subsequent charge if you later move to an Active or other midpipe as the connecting pipes will have to be replaced. Also you should note that the dramatic difference in sound will only come with replacing the midpipe - the rear offers an upgrade but is more subtle.
KEY FEATURES
Made in the USA
304 Stainless Steel
Low, Deep Sound with stock Valve Control
Each exhaust test-fit on our G87 Exhaust Fixture
Guaranteed to fit all G87 BMW M2
Includes all necessary installation hardware
APPLICATIONS
BMW M2
още
Информация:
Due to continued requests from our customers, Active Autowerke is pleased to release the Active Autowerke Valved Rear Exhaust for the X3M and X4M. While these SUVs have received rave reviews for their performance, the sound is a muffled one leaving the driver to wonder if they are really driving a BMW M-car. In order to solve this, Active Autowerke has created a full exhaust system for the X3M/X4M which comprises this rear axle-back valved exhaust, a single mid-pipe and a set of GESI catted downpipes. Together, this remake of the stock exhaust results in a F97/F98 with an amazing sound. You will feel like you are driving a true M-car again.
At Active Autowerke, its not ONLY about making as much power as possible but to maximize the enjoyment of the drive. For over 40 years, power has been the end result of improved performance due to our relentless desire to develop a refined, quality product. This philosophy behind our performance parts is best represented by the introduction of F97/F98 BMW X3M/X4M collection rear exhaust.
The Active Autowerke F97/F98 rear exhaust was carefully engineered to increase the sound level over the factory X3M and X4M exhaust, while also allowing for optimum flow and resonance by reusing the actuators from the BMW valves. Every effort was made in addressing the overly quiet sound of the stock OEM exhaust while designing an exhaust worthy for an M car. We believe our rear exhaust combined with our mid-pipe and catted downpipes offers the best combination of sound and performance versus any other system on the market today. Available for both models, this axle-back exhaust gives your BMW the deep, throaty, growl a car of its caliber should have had from the factory!
PLEASE NOTE - we do offer a version of this rear exhaust for those who only wish to replace their stock rear section (so keeping stock midpipes) but there may be an additional subsequent charge if you later move to an Active or other midpipe as the connecting pipes may have to be replaced. Also you should note that the dramatic difference in sound will only come with replacing the midpipe - the rear offers an upgrade but is more subtle.
KEY FEATURES
Made in the USA
304 Stainless Steel
Low, Deep Sound with stock Valve Control
Each exhaust test-fit on our F97/F98 Exhaust Fixture
Guaranteed to fit all F97/F98 BMW X3M/X4M
Includes all necessary installation hardware
APPLICATIONS
F97/F98 X3M and X4M
още
Информация:
Active Autowerke is proud to release the Active Autowerke Valved Rear Exhaust for the BMW G80 M3 and G82 M4. While these cars have received rave reviews for their performance, the sound is a muffled one leaving the driver to wonder if they are really driving a BMW M-car. In order to solve this, Active Autowerke has created a full exhaust system for the G80/G82 which comprises this rear axle-back valved exhaust, a mid-pipe with x-pipe or single and a set of GESI catted downpipes. Together, this remake of the stock exhaust results in a G80/G82 with an amazing sound. You will feel like you are driving a true M-car again.
At Active Autowerke, its not ONLY about making as much power as possible but to maximize the enjoyment of the drive. For over 40 years, power has been the end result of improved performance due to our relentless desire to develop a refined, quality product. This philosophy behind our performance parts is best represented by the introduction of G80/G82 BMW M3/M4 collection rear exhaust.
The Active Autowerke G80/G82 rear exhaust was carefully engineered to increase the sound level over the factory M3 and M4 exhaust, while also allowing for optimum flow and resonance by reusing the actuators from the BMW valves. Every effort was made in addressing the overly quiet sound of the stock OEM exhaust while designing an exhaust worthy for an M car. We believe our rear exhaust combined with our mid-pipe and catted downpipes offers the best combination of sound and performance versus any other system on the market today. Available for both models, this axle-back exhaust gives your BMW the deep, throaty, growl a car of its caliber should have had from the factory!
PLEASE NOTE - we do offer a version of this rear exhaust for those who only wish to replace their stock rear section (so keeping stock midpipes) but there will be an additional subsequent charge if you later move to an Active or other midpipe as the connecting pipes will have to be replaced. Also you should note that the dramatic difference in sound will only come with replacing the midpipe - the rear offers an upgrade but is more subtle.
KEY FEATURES
Made in the USA
304 Stainless Steel
Low, Deep Sound with stock Valve Control
Each exhaust test-fit on our G80/G82 Exhaust Fixture
Guaranteed to fit all G80/G82 BMW M3/M4
Includes all necessary installation hardware
APPLICATIONS
2021+ M3 / M4
още
Информация:
NOTE: THESE ARE BUILT TO ORDER AND MAY TAKE UP TO 2 WEEKS TO BUILD.
Active Autowerke is proud to announce the release of our Signature F8X M3/M4 Exhaust System.
This system is the result of countless hours of R&D to obtain the perfect combination of performance and sound. Constructed of 100% 304 TIG welded stainless steel, we have created a modular exhaust system that will provide enough flow to support power levels way above the stock S55.
The stock S55 Midpipe is a dual pipe system from each turbo that leads to the rear muffler. The resulting sound is far from pleasant, and without any real scavenging effect the turbo lag is fairly pronounced. By converting to a single 3.5 inch. pipe directly after the downpipes, our system promotes exhaust scavenging along with higher exhaust velocity to produce a quicker spool, more power, and a much smoother exhaust note. We believe that weve built the best performing exhaust on the market. With the reduced back pressure and large single-pipe design you can expect exhaust velocity to remain as high as possible throughout the entire system. Our design is also capable of handling much higher power levels than stock. Its over engineered to have no issues handling the increased exhaust volume from extensive modifications including turbo upgrades. All Active Autowerke exhausts are designed and manufactured for performance, and our S55 exhaust is no different. Instead of copying the OEM exhaust, we started with a blank canvas in order to create a system as close to perfect as possible. MADE IN THE USA
KEY FEATURES
Mandrel bent 304-stainless construction
Completely TIG Welded (No MIG Welding at all)
Flow efficient Y-Pipe design
Perfect fitment with adjustable 90mm double walled tips
True 3.5u201d turbo back design
Uses OEM valve motor
Designed to be used at stock power levels along with highly modified engines
No permanent modifications required
Manufactured in house at our facility in Miami, FL.
APPLICATIONS
2014+ M3 / M4
още
Информация:
NOTE: THESE ARE BUILT TO ORDER AND MAY TAKE UP TO 2 WEEKS TO BUILD.
Active Autowerke is proud to announce the release of our Signature F8X M3/M4 Exhaust System.
This system is the result of countless hours of R&D to obtain the perfect combination of performance and sound. Constructed of 100% 304 TIG welded stainless steel, we have created a modular exhaust system that will provide enough flow to support power levels way above the stock S55.
The stock S55 Midpipe is a dual pipe system from each turbo that leads to the rear muffler. The resulting sound is far from pleasant, and without any real scavenging effect the turbo lag is fairly pronounced. By converting to a single 3.5 inch. pipe directly after the downpipes, our system promotes exhaust scavenging along with higher exhaust velocity to produce a quicker spool, more power, and a much smoother exhaust note. We believe that we built the best performing exhaust on the market. With the reduced back pressure and large single-pipe design you can expect exhaust velocity to remain as high as possible throughout the entire system. Our design is also capable of handling much higher power levels than stock. Its over engineered to have no issues handling the increased exhaust volume from extensive modifications including turbo upgrades. All Active Autowerke exhausts are designed and manufactured for performance, and our S55 exhaust is no different. Instead of copying the OEM exhaust, we started with a blank canvas in order to create a system as close to perfect as possible. MADE IN THE USA
KEY FEATURES
Mandrel bent 304-stainless construction
Completely TIG Welded (No MIG Welding at all)
Flow efficient Y-Pipe design
Perfect fitment with adjustable 90mm double walled tips
True 3.5u201d turbo back design
Uses OEM valve motor
Designed to be used at stock power levels along with highly modified engines
No permanent modifications required
Manufactured in house at our facility in Miami, FL.
APPLICATIONS
2014+ M3 / M4
още
Информация:
THE ULTIMATE F8X BMW M3 & M4 REAR EXHAUST SYSTEM - NOW WITH VALVES
At Active Autowerke, its not ONLY about making as much power as possible. For over 30 years, power has been the end result of improved performance due to our relentless desire to develop a refined, quality product. This philosophy behind our performance parts is best represented by one of the newest additions to our F80 BMW M3 and F82 BMW M4 collection.
The Active Autowerke F8X rear exhaust was carefully engineered to eliminate the unflattering sound of the factory M3 and M4 exhaust, while also allowing for optimum flow and resonance. Every effort was made in addressing the not so appeasing sound of the stock OEM exhaust, but in designing an exhaust worthy for an M car. We believe our rear exhaust combined with our mid-pipe offers the deepest sound and best performance of any other system on the market today. Available for both models, this axle-back exhaust gives your BMW the deep, throaty, growl a car of its caliber should have had from the factory! And NOW, after many requests from our dedicated customers, we are introducing a valved version of the ultimate exhaust which has been dubbed Maad Maxx by our team. We will update dyno charts later but this exhaust flows even better with its valved system.
KEY FEATURES
Made in the USA
18+ WHP gain over stock
30+ LB-FT gain over stock
Quicker turbo spool
Low, Deep Rumble
Flex joints to reduce vibration
Double-canned muffler to reduce resonance
Each exhaust test-fit on our F8X Exhaust Fixture
Guaranteed to fit all F80 BMW M3/F82 BMW M4
Includes all necessary installation hardware
When paired with Active Autowerke F8X Mid-PipeAPPLICATIONS
2014+ M3 / M4
още
Информация:
THE ULTIMATE F87 BMW M2C REAR EXHAUST
At Active Autowerke, it's not ONLY about making as much power as possible but to maximize the enjoyment of the drive. For 40 years, power has been the end result of improved performance due to our relentless desire to develop a refined, quality product. This philosophy behind our performance parts is best represented by one of the newest additions to our F87 BMW M2C and M2CS collection.
The Active Autowerke F87 rear exhaust was carefully engineered to eliminate the unflattering sound of the factory M2C and M2CS exhaust, while also allowing for optimum flow and resonance by reusing the actuators from the BMW valves. Every effort was made in addressing the not so appeasing sound of the stock OEM exhaust, but in designing an exhaust worthy for an "M" car. We believe our rear exhaust combined with our mid-pipe (either single or equal length) offers the best combination of sound and performance versus any other system on the market today. Available for both models, this axle-back exhaust gives your BMW the deep, throaty, growl a car of its caliber should have had from the factory!
PLEASE NOTE - we do offer a version of this rear exhaust for those who only wish to replace their stock rear section (so keeping stock midpipes) but there will be an additional subsequent charge if you later move to an Active or other midpipe as the connecting pipes will have to be replaced.
KEY FEATURES
Made in the USA
304 Stainless Steel
Low, Deep Sound with stock Valve Control
Each exhaust test-fit on our F87 Exhaust Fixture
Guaranteed to fit all F87 BMW M2/M2CS
Includes all necessary installation hardware
Active Autowerke GUARANTEES that each and every F87 M2C and M2CS Rear Exhaust Section will be a precise fit. Every Active Autowerke F87 Rear Exhaust Section is test-fitted on our in-house F87 Exhaust Fixture as part of our quality control measures.
още
Информация:
Valved Axle Back system for BMW M2 Competition!
Multiple End tip configurations possible in 98mm and 102mm diameter!
още
Информация:
Valved Axle Back system for BMW M2 Competition!
Multiple End tip configurations possible in 98mm and 102mm diameter!
още
Информация:
The activation of the valve is carried out using the original actuator via the vehicle onboard electronics.
The original exhaust must be cut! No rear skirt modifications required!
Original tube 80 mm, REMUS tubes 84 mm
KEY FEATURES
Aggressive racing sound
Shot blasted surface, 100% stainless steel
Performance increase, low back pressure
Light weight construction
Perfect shape and fitment
Handmade in Austria
EC homologation