ARP болтове и шпилки BMW за BMW 3 Sedan E90 325 i - 211 коня бензин N52 B25 A - онлайн магазин
211 к.с - бензин
01.2006 - 12.2011
-
ARP 2000 5/16" connecting rod screws in 38.1mm length.
Universally applicable for all H-shank connecting rods.
ARP connecting rod bolts have been developed for the highest requirements and offer optimum safety.
The connecting rod bolts are heat treated and rolled, which gives them up to 10 times higher fatigue strength.
Especially for tuned engines highly recommended!
Connecting rod bearings best to replace directly with.A 3/8" nut should be used for installation.
More information on the correct tightening of the connecting rod bolts HERE
-
ARP Rod Bolt Kit for BMW 1.5l-2.0l (M10) 2.3l (S14) 4-cylinder.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
-
This conrod bolts kit is a must for the M30 M3 BMW running high boost!
motor: S14
tensile strength standard: ca. 900 N/mm²
tensile strength arp: ca. 1500 N/mm²
Made from a range of high quality chrome molly alloy materials. These fasteners will provide the strength and durability required by today's high performance engines.
Packaged in sets containing all required components and mounting instructions. -
This conrod bolts kit is a must for the E36 M3 BMW running high boost!
motor: S50
tensile strength standard: ca. 900 N/mm²
tensile strength arp: ca. 1500 N/mm²
Made from a range of high quality chrome molly alloy materials. These fasteners will provide the strength and durability required by today's high performance engines.
Packaged in sets containing all required components and mounting instructions. -
ARP Conrod bolt kit for BMW 2.8L (M52EURO), 3.0L (S50US) & 3.2L (S52US) M9 x 44mm, inline 6, ARP 2000.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision. -
ARP Conrod bolt kit for BMW 2.8L (M52/M52TU) & 3.0L (M54), inline 6, M9 x 47mm, ARP2000.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision. -
ARP Conrod bolt kit BMW 3.0-4.4L (M60/M62/M62TU) V8 M9 x 53mm UHL, ARP2000.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision. -
ARP Conrod bolt kit for BMW 2.3l (S14), M11, 43mm UHL.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision. -
ARP Conrod bolt kit BMW 2.5L (M50/M50TU), inline 6, M9, 53mm UHL, ARP2000.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision. -
ARP Conrod bolt kit for BMW 3.0L (S50 EURO) inline 6, M10 x 45mm UHL, ARP2000.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision. -
ARP Conrod bolt kit for BMW 3.2L (S54) inline 6, M11 x 47mm UHL, ARP2000.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision. -
ARP Conrod bolt kit for BMW Mini 1.6l M8 x 43mm.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
(Click on the PDF box to download instruction) -
ARP 5/16 "rod bolts with 38,1mm in length.
Universally applicable for all H-Beam conrods .
ARP custom age 625 + have been developed for the highest requirements and provide optimum safety.
At high engine speed, it arrives at the Aufwertsbewegung the piston to high tensile forces acting on the connecting rod according to Kurbelwellenhub more or less.
To avoid this, a screw is recommended Pleulschraube tear as it has a tensile strength of 260-280 PSI, compared to having only a 2000 ARP Zugfestigkit of 220 PSI
The rod bolts are heat treated and rolled, giving them up to 10 times higher fatigue strength.
Especially for tuned engines highly recommended!
Best exchange directly connecting rod bearings.
(Price for one Bolt.)More information on how to properly tighten the connecting rod bolts
-
ARP Head Stud Kit for BMW v8 M60 M62 S62 S65
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
-
High strength ARP bolt made of molybdenum steel for mounting the flywheel to the crankshaft. Suitable for BMW S14 engines.
Especially with tuned engines essential, because much higher torques must be transmitted to the crankshaft!
Thread M12x1,5
All ARP screws can be reused.
These screws are longer than standard screws. Please note during installation!
Tightening sequence:
1) Apply Loctite 242 (blue / medium strength) to the threads
2) Apply ARP Ultra torque Paste under the screw head
3) Tighten screws only hand-tight
4) Then crosswise to 95 Nm -
Digital High End Dial Indicator from ARP for measuring the extension of expansion screws.
When fitting connecting rod bolts, the tightening torque is only of secondary importance. Much more important is the extension of the screw.
This stretch can be measured accurately with the ARP dial gauge.
ARP has taken accuracy to the next level with the introduction of a digital stretch gauge that measures to the ten-thousandth (0.0001-inch).
Accurate readings are made by opposing ball and pin probes centered on the bolt. A uniquely designed aluminum handle facilitates operation.
ALWAYS fit and tighten connecting rod bolts with sufficient ARP Ultra Torque Paste!
For further information about assambling rod bolts correctly, click here
Here is our video on the correct installation of connecting rods and connecting rod bolts:
ARP strech gauge for a perfect conrod bolts assembly. If you want to torque your conrod bolts in a professional way you have to measure the strech and not the torque. This ARP gauge is individually adjustable to measure each kind of conrod bolts. Always use ARP ultra torque grease for conrod assembly.
Here is our video on the correct installation of connecting rods and connecting rod bolts:
This head stud kit is a must for the M30 M3 BMW running high boost!
motor: M10, S14
tensile strength standard: ca. 900 N/mm²
tensile strength arp: ca. 1400 N/mm²
Made from a range of high quality chrome molly alloy materials. These fasteners will provide the strength and durability required by today's high performance engines.
Packaged in sets containing all required components and mounting instructions.ARP Main Stud Kit for 2,5L(M50), 2,8L(M52), 3,2L(S52US) inline 6.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Main Stud Kit for BMW 3.2l (S54) inline 6.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Main Stud Kit for BMW Mini Cooper S MK2 1.6L (N12-N14-N16-N18).
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for BMW Mini Cooper S R53 1.6l (N12-N14-N16-N18).
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for BMW 3.2l E46 M3/S54, inline 6, ARP2000, ARP 12pt.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability
- Tensile strength of 200.000 psi (13,8t/cm²)
- Absolutely perfectly round and straight studs for a first-class assembly
- All kits come with ARP hardened washers and high quality nuts
- Harder, more durable, stable, and processed better than any OEM products
- 10 times stronger threads than the competetive products by thread cut after curing
- Highest ARP quality product for professional use
- Fully reusable
(Click on the PDF box to download instruction)
BMW 1.5l & 2.0l (M10, 2002 Coupe, 318i, 320i) 4 cylinder ARP Head Stud Kit:
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
BMW 2.5L(M50), 3.0L(S50), 3.2L(S52) inline 6, ARP2000, 12pt Head Stud Kit
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
BMW 2.3l 4-cylinder ARP Head Stud Kit (S14).
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
BMW 2.5L M20B25 Head Stud Kit
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for BMW 3.0l and 3,4l (M30) SOHC inline 6.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for BMW Mini Cooper S 1.6l MK2 (N12-N14-N16-N18).
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
Special stud bolt kit from ARP for the cylinder head in your BMW 3.0L 24V (B58) such as 240i, 440i and many more.
High-performance bolts are made of high-strength and heat-treated 8740 chrome-molybdenum forged steel and are therefore optimally suited for use in racing engines.
- Due to the most advanced manufacturing processes our block studs achieve highest strength
- Tensile strength of 200,000 psi (13.8t/cm²)
- Absolutely perfectly rounded and straight bolts for a first-class installation
- Ten times more stable J-thread than series screws due to thread cut after hardening
- Harder, more durable, more stable and better processed than series products
- Absolute quality product for professional use
- Reusable
(Picture similar)
ARP Main Stud Kit for BMW S85 V10 E60/E61 M5 und E63/E64 M6
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.Special stud bolt kit from ARP for the block (main bearing alley) for your BMW 3.0L 24V (B58) like in the 240i, 440i and many more.
High performance studs are made of high-strength and heat-treated 8740 chrome-molybdenum forged steel and are therefore optimally suited for use in racing engines.
- Due to the most advanced manufacturing processes, our block stud bolt achieve highest strength
- Tensile strength of 200,000 psi (13.8t/cm²)
- Absolutely perfectly rounded and straight bolts for a first-class installation
- Ten times more stable J-thread than series screws due to thread cut after hardening
- Harder, more durable, more stable and better processed than series products
- Absolute quality product for professional use
- Reusable
(Picture similar)
"Spezial ARP ultra torque assembly lubricant for professional fittment of each kind of ARP bolts or studs.
All ARP bolts and studs threads should be thigthen up with this ARP Moly Assembly Lubricant called ultra torque to mentain correct torques specifications.
All ARP kit have this lubricant included.
""Spezial ARP ultra torque assembly lubricant for professional fittment of each kind of ARP bolts or studs.
All ARP bolts and studs threads should be thigthen up with this ARP Moly Assembly Lubricant called ultra torque to mentain correct torques specifications.
Big can (approx. 350 gramms) with brush included.
"M10 x 1.25 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M10 x 1.25 x 20 20 mm n.a. M10 x 1.25 x 25 25 mm n.a. M10 x 1.25 x 30 30 mm n.a. M10 x 1.25 x 35 35 mm n.a. M10 x 1.25 x 40 26 mm 14 mm M10 x 1.25 x 45 26 mm 19 mm M10 x 1.25 x 50 26 mm 24 mm M10 x 1.25 x 60 26 mm 34 mm M10 x 1.25 x 70 26 mm 44 mm M10 x 1.25 x 80 26 mm 54 mm M10 x 1.25 x 90 26 mm 64 mm M10 x 1.25 x 100 26 mm 74 mm M10 x 1.50 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M10 x 1.50 x 20 20 mm n.a. M10 x 1.50 x 25 25 mm n.a. M10 x 1.50 x 30 30 mm n.a. M10 x 1.50 x 35 35 mm n.a. M10 x 1.50 x 40 26 mm 14 mm M10 x 1.50 x 45 26 mm 19 mm M10 x 1.50 x 50 26 mm 24 mm M10 x 1.50 x 60 26 mm 34 mm M10 x 1.50 x 65 26 mm 39 mm M10 x 1.50 x 70 26 mm 44 mm M10 x 1.50 x 80 26 mm 54 mm M10 x 1.50 x 90 26 mm 64 mm M10 x 1.50 x 100 26 mm 74 mm M12 x 1.50 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M12 x 1.50 x 25 25 mm n.a. M12 x 1.50 x 30 30 mm n.a. M12 x 1.50 x 35 30 mm 5 mm M12 x 1.50 x 40 30 mm 10 mm M12 x 1.50 x 45 30 mm 15 mm M12 x 1.50 x 50 30 mm 20 mm M12 x 1.50 x 60 30 mm 30 mm M12 x 1.50 x 70 30 mm 40 mm M12 x 1.50 x 80 30 mm 50 mm M12 x 1.50 x 90 30 mm 60 mm M12 x 1.50 x 100 30 mm 70 mm M12 x 1.75 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M12 x 1.75 x 25 25 mm n.a. M12 x 1.75 x 30 30 mm n.a. M12 x 1.75 x 35 30 mm 5 mm M12 x 1.75 x 40 30 mm 10 mm M12 x 1.75 x 45 30 mm 15 mm M12 x 1.75 x 50 30 mm 20 mm M12 x 1.75 x 60 30 mm 30 mm M12 x 1.75 x 70 30 mm 40 mm M12 x 1.75 x 80 30 mm 50 mm M12 x 1.75 x 90 30 mm 60 mm M12 x 1.75 x 100 30 mm 70 mm M6 x 1.00 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M6 x 1.00 x 12 12 mm n.a. M6 x 1.00 x 16 16 mm n.a. M6 x 1.00 x 20 20 mm n.a. M6 x 1.00 x 25 25 mm n.a. M6 x 1.00 x 30 18 mm 12 mm M6 x 1.00 x 35 18 mm 17 mm M6 x 1.00 x 40 18 mm 22 mm M6 x 1.00 x 45 18 mm 27 mm M6 x 1.00 x 50 18 mm 32 mm M6 x 1.00 x 55 18 mm 37 mm M6 x 1.00 x 60 18 mm 42 mm M6 x 1.00 x 65 18 mm 47 mm M6 x 1.00 x 70 18 mm 52 mm M6 x 1.00 x 75 18 mm 57 mm M6 x 1.00 x 80 18 mm 62 mm M6 x 1.00 x 90 18 mm 72 mm M6 x 1.00 x 100 18 mm 82 mm M6 x 1.00 x 135 18 mm 117 mm M8 x 1.25 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M8 x 1.25 x 12 12 mm n.a. M8 x 1.25 x 16 16 mm n.a. M8 x 1.25 x 20 20 mm n.a. M8 x 1.25 x 25 25 mm n.a. M8 x 1.25 x 30 22 mm 8 mm M8 x 1.25 x 35 22 mm 13 mm M8 x 1.25 x 40 22 mm 18 mm M8 x 1.25 x 45 22 mm 23 mm M8 x 1.25 x 50 22 mm 28 mm M8 x 1.25 x 55 22 mm 33 mm M8 x 1.25 x 60 22 mm 38 mm M8 x 1.25 x 65 22 mm 43 mm M8 x 1.25 x 70 22 mm 48 mm M8 x 1.25 x 75 22 mm 53 mm M8 x 1.25 x 80 22 mm 58 mm M8 x 1.25 x 85 22 mm 63 mm M8 x 1.25 x 90 22 mm 68 mm M8 x 1.25 x 100 22 mm 78 mm ARP Flywheel bolt kit for Opel/Vauxhall 2.0L 16V.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.- Perfectly crafted rolled threads from indestructible material.
- These bolts are ideal for tuned engines and are highly recommended by higher tourqe.
- Set of 8 pcs of high-strenght bolts
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
Single nut for all ARP studs. Should you ever lose one, no problem.
- 100% reusable
- Stainless
- Extremely temperature resistant
Price for a nut with a washer
Single nut in our high boost version for almost all stud bolt from ARP. Should you ever lose or damage one, no problem.
- 100% reusable
- stainless
- extremely temperature resistant
Price for one nut.
Spezial tool to fit ARP studs in the Cylinder head.
Some kits from ARP may include this tool, but we just sell it always seperately. This makes the kits much more cheaper in the end.
This tool is needed for the 1.8T engine.Special Stud Kit from BAR-TEK® Motorsport for the block (main bearing) for your BMW 4.0L V8 (S65) as in the E90, E92 and E93 M3.
High-performance bolts are made of high-strength and heat-treated 8740 chromium molybdenum forged steel and are therefore ideally suited for use in racing engines.
- Through the most advanced manufacturing processes, our block studs achieve maximum strength
- Tensile strength of 200,000 psi (13.8t / cm²)
- Absolutely perfectly rounded and straight bolts for a first-class installation
- Ten times more stable J-thread than standard screws by thread cutting after curing
- Harder, more durable, more stable, and better processed than standard products
- Absolute quality product for professional use
- reusable
(picture similar)
Internal multi-tooth socket for mounting ARP nuts and bolts.
12 square socket with 1/2 inch drive for tightening ARP nuts. This ARP tool is available in different sizes and is needed for the assembly of all ARP stud bolt and screws.
Available in the following sizes: 8-20mm
Спирачна система - BMW 3 Sedan E90 325 iЗатвориОкачване на колелата - BMW 3 Sedan E90 325 iЗатвориКормилна система - BMW 3 Sedan E90 325 iЗатвориЗадвижване на колелата - BMW 3 Sedan E90 325 iЗатвориТрансмисия - BMW 3 Sedan E90 325 iЗатвориРемъчно задвижване - BMW 3 Sedan E90 325 iЗатвориЧасти за двигател - BMW 3 Sedan E90 325 iЗатвориЧасти за цилиндров блок - BMW 3 Sedan E90 325 iЗатвориГарнитури - BMW 3 Sedan E90 325 iЗатвориОхладителна система - BMW 3 Sedan E90 325 iЗатвориКлиматична система - BMW 3 Sedan E90 325 iЗатвориОтопление и вентилация - BMW 3 Sedan E90 325 iЗатвориФилтри - BMW 3 Sedan E90 325 iЗатвориМасла и течности - BMW 3 Sedan E90 325 iЗатвориЗапалителна система - BMW 3 Sedan E90 325 iЗатвориДатчици и сензори - BMW 3 Sedan E90 325 iЗатвориГоривна система - BMW 3 Sedan E90 325 iЗатвориЕлектрическа система - BMW 3 Sedan E90 325 iЗатвориСтартова система - BMW 3 Sedan E90 325 iЗатвориПочистване на стъклата - BMW 3 Sedan E90 325 iЗатвориАуспуси и гърнета - BMW 3 Sedan E90 325 iЗатвориЕдрогабаритни части - BMW 3 Sedan E90 325 iЗатвориСветлини - BMW 3 Sedan E90 325 iЗатвориИнтериор - BMW 3 Sedan E90 325 iЗатвориДобавки - BMW 3 Sedan E90 325 iЗатвориТунинг - BMW 3 Sedan E90 325 iЗатвориАвтоаксесоари - BMW 3 Sedan E90 325 iЗатвориЗадължително оборудване - BMW 3 Sedan E90 325 iЗатвориИнструменти - BMW 3 Sedan E90 325 iЗатвориТехнически характеристикиКонтролни стойности за изгорелите газовеОбщи стойности, съществени за изгорелите газовеДанни за ходовата частДжанти и гумиНалягане при пълнене на гумите отпред0,00 barвиж B- колона влявоНалягане при пълнене на гумите отзад0,00 barвиж B- колона влявоХодова част размериБаза2760 ммКоловоз предни колела1495 - 1503 ммКоловоз задни колела1502 - 1517 ммСпирачна уредбаИзмерения на спирачкатаДебелина на спирачния диск преден мостза спирачен диск 292x22 mm22,00 ммДебелина на спирачния диск преден мостза спирачен диск 300x24 mm24,00 ммДебелина на спирачния диск преден мостза спирачен диск 312x24 mm24,00 ммДебелина на спирачния диск преден мостза спирачен диск 330x24 mm24,00 ммДебелина на спирачния диск преден мостза спирачен диск 338x26 mm26,00 ммДебелина на спирачния диск преден мостза спирачен диск 348x30 mm30,00 ммДебелина на спирачния диск преден мостза спирачен диск 360x30 mm30,00 ммДебелина на спирачния диск граница на износване преден мостза спирачен диск 292x22 mm19,60 ммДебелина на спирачния диск граница на износване преден мостСпирачният диск (ове) е продупчен., за спирачен диск 292x22 mm20,40 ммДебелина на спирачния диск граница на износване преден мостза спирачен диск 300x24 mm21,60 ммДебелина на спирачния диск граница на износване преден мостСпирачният диск (ове) е продупчен., за спирачен диск 300x24 mm22,40 ммДебелина на спирачния диск граница на износване преден мостза спирачен диск 312x24 mm21,60 ммДебелина на спирачния диск граница на износване преден мостСпирачният диск (ове) е продупчен., за спирачен диск 312x24 mm22,40 ммДебелина на спирачния диск граница на износване преден мостза спирачен диск 330x24 mm21,60 ммДебелина на спирачния диск граница на износване преден мостСпирачният диск (ове) е продупчен., за спирачен диск 330x24 mm22,40 ммДебелина на спирачния диск граница на износване преден мостза спирачен диск 338x26 mm23,60 ммДебелина на спирачния диск граница на износване преден мостСпирачният диск (ове) е продупчен., за спирачен диск 338x26 mm24,40 ммДебелина на спирачния диск граница на износване преден мостза спирачен диск 348x30 mm27,60 ммДебелина на спирачния диск граница на износване преден мостСпирачният диск (ове) е продупчен., за спирачен диск 348x30 mm28,40 ммДебелина на спирачния диск граница на износване преден мостза спирачен диск 360x30 mm27,60 ммДебелина на спирачния диск граница на износване преден мостСпирачният диск (ове) е продупчен., за спирачен диск 360x30 mm28,40 ммДебелина на спирачния диск заден мостза спирачен диск 296x10 mm10,00 ммДебелина на спирачния диск заден мостза спирачен диск 300x20 mm20,00 ммДебелина на спирачния диск заден мостза спирачен диск 324x22 mm22,00 ммДебелина на спирачния диск заден мостза спирачен диск 336x22 mm22,00 ммДебелина на спирачния диск заден мостза спирачен диск 350x24 mm24,00 ммДебелина на спирачния диск граница на износване заден мостза спирачен диск 296x10 mm7,60 ммДебелина на спирачния диск граница на износване заден мостСпирачният диск (ове) е продупчен., за спирачен диск 296x10 mm8,40 ммДебелина на спирачния диск граница на износване заден мостза спирачен диск 300x20 mm17,60 ммДебелина на спирачния диск граница на износване заден мостСпирачният диск (ове) е продупчен., за спирачен диск 300x20 mm18,40 ммДебелина на спирачния диск граница на износване заден мостза спирачен диск 324x22 mm19,60 ммДебелина на спирачния диск граница на износване заден мостСпирачният диск (ове) е продупчен., за спирачен диск 324x22 mm20,40 ммДебелина на спирачния диск граница на износване заден мостза спирачен диск 336x22 mm19,60 ммДебелина на спирачния диск граница на износване заден мостСпирачният диск (ове) е продупчен., за спирачен диск 336x22 mm20,40 ммДебелина на спирачния диск граница на износване заден мостза спирачен диск 350x24 mm21,60 ммДебелина на спирачния диск граница на износване заден мостСпирачният диск (ове) е продупчен., за спирачен диск 350x24 mm22,40 ммДиаметър на спирачния барабан заден мостРъчна спирачка160,00 ммДебелина на спирачната накладка граница на износване преден мостбез задна пластина3,70 ммДебелина на спирачната накладка граница на износване заден мостбез задна пластина1,50 ммДебелина на спирачните накладки граница на износване ръчна спирачкабез задна пластина1,50 ммСпирачен диск диаметър преден мостза спирачен диск 292x22 mm292,00 ммСпирачен диск диаметър преден мостза спирачен диск 300x24 mm300,00 ммСпирачен диск диаметър преден мостза спирачен диск 312x24 mm312,00 ммСпирачен диск диаметър преден мостза спирачен диск 330x24 mm330,00 ммСпирачен диск диаметър преден мостза спирачен диск 338x26 mm338,00 ммСпирачен диск диаметър преден мостза спирачен диск 348x30 mm348,00 ммСпирачен диск диаметър преден мостза спирачен диск 360x30 mm360,00 ммСпирачен диск диаметър заден мостза спирачен диск 296x10 mm296,00 ммСпирачен диск диаметър заден мостза спирачен диск 300x20 mm300,00 ммСпирачен диск диаметър заден мостза спирачен диск 324x22 mm324,00 ммСпирачен диск диаметър заден мостза спирачен диск 336x22 mm336,00 ммСпирачен диск диаметър заден мостза спирачен диск 350x24 mm350,00 ммКонсумативиКоличество запълващи вещества и спецификацииМасло за скоростната кутияСкоростна кутия GS6-17BG1,30 литраСпецификация масло за скоростна кутияСкоростна кутия GS6-17BG83 22 7 533 818Оригинално маслоМасло за автоматична скоростна кутияСкоростна кутия GA6HP19Z9,50 литраМасло за автоматична скоростна кутияСкоростна кутия GA6L45R9,50 литраСпецификация масло за автоматична скоростна кутияСкоростна кутия GA6HP19Z83 22 0 142 516Оригинално маслоСпецификация масло за автоматична скоростна кутияСкоростна кутия GA6L45R83 22 0 432 807Оригинално маслоСредства за охлаждане климатична инсталациядо 2010/04580 - 600 грамаОпределящи са данните върху заводската табела в двигателната секция.Средства за охлаждане климатична инсталацияот 2010/05 и нагоре610 - 630 грамаОпределящи са данните върху заводската табела в двигателната секция.Спецификация охлаждащи средстваR134aСпецификация охлаждащо масло81 22 9 407 724Оригинално маслоОсветлениеПредни фаровеСветлини за дневно каранеПринадлежащи артикули, 1LEDDRL 1Светлини за дневно каранеПринадлежащи артикули, 2DAY1Габаритиот 2008/09 и нагоре, с халогенни фарове>Оригинален детайлГабаритидо 2008/08, с би-ксенон>Оригинален детайлМигач преденот 2008/09 и нагоре, с халогенни фаровеPY24W 12V 24W PGU20/4Мигач преденот 2008/09 и нагоре, с би-ксенонLEDОригинален детайлЗадни фаровеМигач заденот 2008/09 и нагореLEDОригинален детайлЗадна светлинаот 2008/09 и нагореLEDОригинален детайлОсветление на табелата с регистрационния номерот 2008/09 и нагореLEDОригинален детайлДопълнителни стоповеLEDОригинален детайлВътрешни лампиИзбраното МПС е успешно добавено във вашия гараж. +-
Огромен избор Над 800 000 авточасти
-
Купи на кредит с ТБИ Минимална сума 150 лв.
-
Експресна доставка Наложен платеж и преглед
-
14 дни срок Връщане или замяна
ТОП производители
Krasimir Dimitrov29 April 2024Nikolai Sokolov29 April 2024Deyan Mihaylov29 April 2024Галин Петков29 April 2024GTA 5 AND CS GO GTA 5 AND CS GO29 April 2024Tsvetan Tcholakov29 April 2024