ARP болтове и шпилки BMW за BMW 3 Touring E36 318 tds - 90 коня дизел M41 D17 (174T1) - онлайн магазин
90 к.с - дизел
03.1995 - 04.1999
-
ARP 2000 5/16" connecting rod screws in 38.1mm length.
Universally applicable for all H-shank connecting rods.
ARP connecting rod bolts have been developed for the highest requirements and offer optimum safety.
The connecting rod bolts are heat treated and rolled, which gives them up to 10 times higher fatigue strength.
Especially for tuned engines highly recommended!
Connecting rod bearings best to replace directly with.A 3/8" nut should be used for installation.
More information on the correct tightening of the connecting rod bolts HERE
-
ARP Rod Bolt Kit for BMW 1.5l-2.0l (M10) 2.3l (S14) 4-cylinder.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
-
This conrod bolts kit is a must for the M30 M3 BMW running high boost!
motor: S14
tensile strength standard: ca. 900 N/mm²
tensile strength arp: ca. 1500 N/mm²
Made from a range of high quality chrome molly alloy materials. These fasteners will provide the strength and durability required by today's high performance engines.
Packaged in sets containing all required components and mounting instructions. -
This conrod bolts kit is a must for the E36 M3 BMW running high boost!
motor: S50
tensile strength standard: ca. 900 N/mm²
tensile strength arp: ca. 1500 N/mm²
Made from a range of high quality chrome molly alloy materials. These fasteners will provide the strength and durability required by today's high performance engines.
Packaged in sets containing all required components and mounting instructions. -
ARP Conrod bolt kit for BMW 2.8L (M52EURO), 3.0L (S50US) & 3.2L (S52US) M9 x 44mm, inline 6, ARP 2000.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision. -
ARP Conrod bolt kit for BMW 2.8L (M52/M52TU) & 3.0L (M54), inline 6, M9 x 47mm, ARP2000.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision. -
ARP Conrod bolt kit BMW 3.0-4.4L (M60/M62/M62TU) V8 M9 x 53mm UHL, ARP2000.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision. -
ARP Conrod bolt kit for BMW 2.3l (S14), M11, 43mm UHL.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision. -
ARP Conrod bolt kit BMW 2.5L (M50/M50TU), inline 6, M9, 53mm UHL, ARP2000.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision. -
ARP Conrod bolt kit for BMW 3.0L (S50 EURO) inline 6, M10 x 45mm UHL, ARP2000.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision. -
ARP Conrod bolt kit for BMW 3.2L (S54) inline 6, M11 x 47mm UHL, ARP2000.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision. -
ARP Conrod bolt kit for BMW Mini 1.6l M8 x 43mm.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
(Click on the PDF box to download instruction) -
ARP 5/16 "rod bolts with 38,1mm in length.
Universally applicable for all H-Beam conrods .
ARP custom age 625 + have been developed for the highest requirements and provide optimum safety.
At high engine speed, it arrives at the Aufwertsbewegung the piston to high tensile forces acting on the connecting rod according to Kurbelwellenhub more or less.
To avoid this, a screw is recommended Pleulschraube tear as it has a tensile strength of 260-280 PSI, compared to having only a 2000 ARP Zugfestigkit of 220 PSI
The rod bolts are heat treated and rolled, giving them up to 10 times higher fatigue strength.
Especially for tuned engines highly recommended!
Best exchange directly connecting rod bearings.
(Price for one Bolt.)More information on how to properly tighten the connecting rod bolts
-
ARP Head Stud Kit for BMW v8 M60 M62 S62 S65
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
-
High strength ARP bolt made of molybdenum steel for mounting the flywheel to the crankshaft. Suitable for BMW S14 engines.
Especially with tuned engines essential, because much higher torques must be transmitted to the crankshaft!
Thread M12x1,5
All ARP screws can be reused.
These screws are longer than standard screws. Please note during installation!
Tightening sequence:
1) Apply Loctite 242 (blue / medium strength) to the threads
2) Apply ARP Ultra torque Paste under the screw head
3) Tighten screws only hand-tight
4) Then crosswise to 95 Nm -
Digital High End Dial Indicator from ARP for measuring the extension of expansion screws.
When fitting connecting rod bolts, the tightening torque is only of secondary importance. Much more important is the extension of the screw.
This stretch can be measured accurately with the ARP dial gauge.
ARP has taken accuracy to the next level with the introduction of a digital stretch gauge that measures to the ten-thousandth (0.0001-inch).
Accurate readings are made by opposing ball and pin probes centered on the bolt. A uniquely designed aluminum handle facilitates operation.
ALWAYS fit and tighten connecting rod bolts with sufficient ARP Ultra Torque Paste!
For further information about assambling rod bolts correctly, click here
Here is our video on the correct installation of connecting rods and connecting rod bolts:
ARP strech gauge for a perfect conrod bolts assembly. If you want to torque your conrod bolts in a professional way you have to measure the strech and not the torque. This ARP gauge is individually adjustable to measure each kind of conrod bolts. Always use ARP ultra torque grease for conrod assembly.
Here is our video on the correct installation of connecting rods and connecting rod bolts:
This head stud kit is a must for the M30 M3 BMW running high boost!
motor: M10, S14
tensile strength standard: ca. 900 N/mm²
tensile strength arp: ca. 1400 N/mm²
Made from a range of high quality chrome molly alloy materials. These fasteners will provide the strength and durability required by today's high performance engines.
Packaged in sets containing all required components and mounting instructions.ARP Main Stud Kit for 2,5L(M50), 2,8L(M52), 3,2L(S52US) inline 6.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Main Stud Kit for BMW 3.2l (S54) inline 6.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Main Stud Kit for BMW Mini Cooper S MK2 1.6L (N12-N14-N16-N18).
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for BMW Mini Cooper S R53 1.6l (N12-N14-N16-N18).
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for BMW 3.2l E46 M3/S54, inline 6, ARP2000, ARP 12pt.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability
- Tensile strength of 200.000 psi (13,8t/cm²)
- Absolutely perfectly round and straight studs for a first-class assembly
- All kits come with ARP hardened washers and high quality nuts
- Harder, more durable, stable, and processed better than any OEM products
- 10 times stronger threads than the competetive products by thread cut after curing
- Highest ARP quality product for professional use
- Fully reusable
(Click on the PDF box to download instruction)
BMW 1.5l & 2.0l (M10, 2002 Coupe, 318i, 320i) 4 cylinder ARP Head Stud Kit:
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
BMW 2.5L(M50), 3.0L(S50), 3.2L(S52) inline 6, ARP2000, 12pt Head Stud Kit
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
BMW 2.3l 4-cylinder ARP Head Stud Kit (S14).
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
BMW 2.5L M20B25 Head Stud Kit
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for BMW 3.0l and 3,4l (M30) SOHC inline 6.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for BMW Mini Cooper S 1.6l MK2 (N12-N14-N16-N18).
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
Special stud bolt kit from ARP for the cylinder head in your BMW 3.0L 24V (B58) such as 240i, 440i and many more.
High-performance bolts are made of high-strength and heat-treated 8740 chrome-molybdenum forged steel and are therefore optimally suited for use in racing engines.
- Due to the most advanced manufacturing processes our block studs achieve highest strength
- Tensile strength of 200,000 psi (13.8t/cm²)
- Absolutely perfectly rounded and straight bolts for a first-class installation
- Ten times more stable J-thread than series screws due to thread cut after hardening
- Harder, more durable, more stable and better processed than series products
- Absolute quality product for professional use
- Reusable
(Picture similar)
ARP Main Stud Kit for BMW S85 V10 E60/E61 M5 und E63/E64 M6
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.Special stud bolt kit from ARP for the block (main bearing alley) for your BMW 3.0L 24V (B58) like in the 240i, 440i and many more.
High performance studs are made of high-strength and heat-treated 8740 chrome-molybdenum forged steel and are therefore optimally suited for use in racing engines.
- Due to the most advanced manufacturing processes, our block stud bolt achieve highest strength
- Tensile strength of 200,000 psi (13.8t/cm²)
- Absolutely perfectly rounded and straight bolts for a first-class installation
- Ten times more stable J-thread than series screws due to thread cut after hardening
- Harder, more durable, more stable and better processed than series products
- Absolute quality product for professional use
- Reusable
(Picture similar)
"Spezial ARP ultra torque assembly lubricant for professional fittment of each kind of ARP bolts or studs.
All ARP bolts and studs threads should be thigthen up with this ARP Moly Assembly Lubricant called ultra torque to mentain correct torques specifications.
All ARP kit have this lubricant included.
""Spezial ARP ultra torque assembly lubricant for professional fittment of each kind of ARP bolts or studs.
All ARP bolts and studs threads should be thigthen up with this ARP Moly Assembly Lubricant called ultra torque to mentain correct torques specifications.
Big can (approx. 350 gramms) with brush included.
"M10 x 1.25 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M10 x 1.25 x 20 20 mm n.a. M10 x 1.25 x 25 25 mm n.a. M10 x 1.25 x 30 30 mm n.a. M10 x 1.25 x 35 35 mm n.a. M10 x 1.25 x 40 26 mm 14 mm M10 x 1.25 x 45 26 mm 19 mm M10 x 1.25 x 50 26 mm 24 mm M10 x 1.25 x 60 26 mm 34 mm M10 x 1.25 x 70 26 mm 44 mm M10 x 1.25 x 80 26 mm 54 mm M10 x 1.25 x 90 26 mm 64 mm M10 x 1.25 x 100 26 mm 74 mm M10 x 1.50 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M10 x 1.50 x 20 20 mm n.a. M10 x 1.50 x 25 25 mm n.a. M10 x 1.50 x 30 30 mm n.a. M10 x 1.50 x 35 35 mm n.a. M10 x 1.50 x 40 26 mm 14 mm M10 x 1.50 x 45 26 mm 19 mm M10 x 1.50 x 50 26 mm 24 mm M10 x 1.50 x 60 26 mm 34 mm M10 x 1.50 x 65 26 mm 39 mm M10 x 1.50 x 70 26 mm 44 mm M10 x 1.50 x 80 26 mm 54 mm M10 x 1.50 x 90 26 mm 64 mm M10 x 1.50 x 100 26 mm 74 mm M12 x 1.50 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M12 x 1.50 x 25 25 mm n.a. M12 x 1.50 x 30 30 mm n.a. M12 x 1.50 x 35 30 mm 5 mm M12 x 1.50 x 40 30 mm 10 mm M12 x 1.50 x 45 30 mm 15 mm M12 x 1.50 x 50 30 mm 20 mm M12 x 1.50 x 60 30 mm 30 mm M12 x 1.50 x 70 30 mm 40 mm M12 x 1.50 x 80 30 mm 50 mm M12 x 1.50 x 90 30 mm 60 mm M12 x 1.50 x 100 30 mm 70 mm M12 x 1.75 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M12 x 1.75 x 25 25 mm n.a. M12 x 1.75 x 30 30 mm n.a. M12 x 1.75 x 35 30 mm 5 mm M12 x 1.75 x 40 30 mm 10 mm M12 x 1.75 x 45 30 mm 15 mm M12 x 1.75 x 50 30 mm 20 mm M12 x 1.75 x 60 30 mm 30 mm M12 x 1.75 x 70 30 mm 40 mm M12 x 1.75 x 80 30 mm 50 mm M12 x 1.75 x 90 30 mm 60 mm M12 x 1.75 x 100 30 mm 70 mm M6 x 1.00 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M6 x 1.00 x 12 12 mm n.a. M6 x 1.00 x 16 16 mm n.a. M6 x 1.00 x 20 20 mm n.a. M6 x 1.00 x 25 25 mm n.a. M6 x 1.00 x 30 18 mm 12 mm M6 x 1.00 x 35 18 mm 17 mm M6 x 1.00 x 40 18 mm 22 mm M6 x 1.00 x 45 18 mm 27 mm M6 x 1.00 x 50 18 mm 32 mm M6 x 1.00 x 55 18 mm 37 mm M6 x 1.00 x 60 18 mm 42 mm M6 x 1.00 x 65 18 mm 47 mm M6 x 1.00 x 70 18 mm 52 mm M6 x 1.00 x 75 18 mm 57 mm M6 x 1.00 x 80 18 mm 62 mm M6 x 1.00 x 90 18 mm 72 mm M6 x 1.00 x 100 18 mm 82 mm M6 x 1.00 x 135 18 mm 117 mm M8 x 1.25 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M8 x 1.25 x 12 12 mm n.a. M8 x 1.25 x 16 16 mm n.a. M8 x 1.25 x 20 20 mm n.a. M8 x 1.25 x 25 25 mm n.a. M8 x 1.25 x 30 22 mm 8 mm M8 x 1.25 x 35 22 mm 13 mm M8 x 1.25 x 40 22 mm 18 mm M8 x 1.25 x 45 22 mm 23 mm M8 x 1.25 x 50 22 mm 28 mm M8 x 1.25 x 55 22 mm 33 mm M8 x 1.25 x 60 22 mm 38 mm M8 x 1.25 x 65 22 mm 43 mm M8 x 1.25 x 70 22 mm 48 mm M8 x 1.25 x 75 22 mm 53 mm M8 x 1.25 x 80 22 mm 58 mm M8 x 1.25 x 85 22 mm 63 mm M8 x 1.25 x 90 22 mm 68 mm M8 x 1.25 x 100 22 mm 78 mm ARP Flywheel bolt kit for Opel/Vauxhall 2.0L 16V.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.- Perfectly crafted rolled threads from indestructible material.
- These bolts are ideal for tuned engines and are highly recommended by higher tourqe.
- Set of 8 pcs of high-strenght bolts
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
Single nut for all ARP studs. Should you ever lose one, no problem.
- 100% reusable
- Stainless
- Extremely temperature resistant
Price for a nut with a washer
Single nut in our high boost version for almost all stud bolt from ARP. Should you ever lose or damage one, no problem.
- 100% reusable
- stainless
- extremely temperature resistant
Price for one nut.
Spezial tool to fit ARP studs in the Cylinder head.
Some kits from ARP may include this tool, but we just sell it always seperately. This makes the kits much more cheaper in the end.
This tool is needed for the 1.8T engine.Special Stud Kit from BAR-TEK® Motorsport for the block (main bearing) for your BMW 4.0L V8 (S65) as in the E90, E92 and E93 M3.
High-performance bolts are made of high-strength and heat-treated 8740 chromium molybdenum forged steel and are therefore ideally suited for use in racing engines.
- Through the most advanced manufacturing processes, our block studs achieve maximum strength
- Tensile strength of 200,000 psi (13.8t / cm²)
- Absolutely perfectly rounded and straight bolts for a first-class installation
- Ten times more stable J-thread than standard screws by thread cutting after curing
- Harder, more durable, more stable, and better processed than standard products
- Absolute quality product for professional use
- reusable
(picture similar)
Internal multi-tooth socket for mounting ARP nuts and bolts.
12 square socket with 1/2 inch drive for tightening ARP nuts. This ARP tool is available in different sizes and is needed for the assembly of all ARP stud bolt and screws.
Available in the following sizes: 8-20mm
Спирачна система - BMW 3 Touring E36 318 tdsЗатвориОкачване на колелата - BMW 3 Touring E36 318 tdsЗатвориКормилна система - BMW 3 Touring E36 318 tdsЗатвориЗадвижване на колелата - BMW 3 Touring E36 318 tdsЗатвориТрансмисия - BMW 3 Touring E36 318 tdsЗатвориРемъчно задвижване - BMW 3 Touring E36 318 tdsЗатвориЧасти за двигател - BMW 3 Touring E36 318 tdsЗатвориЧасти за цилиндров блок - BMW 3 Touring E36 318 tdsЗатвориГарнитури - BMW 3 Touring E36 318 tdsЗатвориОхладителна система - BMW 3 Touring E36 318 tdsЗатвориКлиматична система - BMW 3 Touring E36 318 tdsЗатвориОтопление и вентилация - BMW 3 Touring E36 318 tdsЗатвориФилтри - BMW 3 Touring E36 318 tdsЗатвориМасла и течности - BMW 3 Touring E36 318 tdsЗатвориДатчици и сензори - BMW 3 Touring E36 318 tdsЗатвориГоривна система - BMW 3 Touring E36 318 tdsЗатвориЕлектрическа система - BMW 3 Touring E36 318 tdsЗатвориСтартова система - BMW 3 Touring E36 318 tdsЗатвориПочистване на стъклата - BMW 3 Touring E36 318 tdsЗатвориАуспуси и гърнета - BMW 3 Touring E36 318 tdsЗатвориЕдрогабаритни части - BMW 3 Touring E36 318 tdsЗатвориСветлини - BMW 3 Touring E36 318 tdsЗатвориИнтериор - BMW 3 Touring E36 318 tdsЗатвориДобавки - BMW 3 Touring E36 318 tdsЗатвориТунинг - BMW 3 Touring E36 318 tdsЗатвориАвтоаксесоари - BMW 3 Touring E36 318 tdsЗатвориЗадължително оборудване - BMW 3 Touring E36 318 tdsЗатвориИнструменти - BMW 3 Touring E36 318 tdsЗатвориТехнически характеристикиОбщи данниОбщи сведения основни стойностиВид на управлението на двигателяАнгренажна веригаОбороти при макс. мощност4400 1/minОбороти при макс. въртящ момент2000 1/minМаксимален въртящ момент190 NmХод82,80 ммВътрешен диаметър на цилиндъра80,00 ммВентили за един цилиндър2Компенсация на луфта на вентилаХидроповдигачЪгъл на гнездото на вентила - всмукателен клапан45°Ъгъл на гнездото на вентила - изпускателен клапан45°Диаметър на стъблото на вентила - всмукателен клапан6,955 - 6,970 ммДиаметър на стъблото на вентила - изпускателен клапан6,945 - 6,960 ммКоличество на нужните запалителни свещи/нагревателни свещи4Последователност на запалване1-3-4-2Налягане при сгъстяване20,0 barСтепен на сгъстяване22,00 :1Максимално налягане при зареждане турбо/компресор0,80 barСистема за горивоСистема за гориво общи сведенияВид на моторното горивоДизелВпръскваща помпа производител"Бош"Впръскващи дюзи производител"Бош"Впръскващи дюзи типDN O SD 318Налягане при впръскване дизел150 - 158 barКонтролни стойности за изгорелите газовеОбщи стойности, съществени за изгорелите газовеОбороти на празен ход при скоростната кутия770 - 870 1/minМинимална температура на моторното масло при AU80 °CСтойности за изгорелите газове дизелово горивоОбороти, ограничавани от регулатора4800 1/minМаксимална стойност K2,50 1/mДанни за ходовата частХодова част размериБаза2698 ммКоловоз предни колелас джанта ET421418 ммКоловоз предни колелас джанта ET471408 ммКоловоз задни колелас джанта ET421418 ммКоловоз задни колелас джанта ET471408 ммСпирачна уредбаИзмерения на спирачкатаДебелина на спирачния диск преден мост12,00 ммДебелина на спирачния диск преден мостДискова спирачка с вътрешна вентилация22,00 ммДебелина на спирачния диск граница на износване преден мост10,40 ммДебелина на спирачния диск граница на износване преден мостДискова спирачка с вътрешна вентилация20,40 ммДебелина на спирачния диск заден мост10,00 ммДебелина на спирачния диск граница на износване заден мост8,40 ммДиаметър на спирачния барабан заден мостРъчна спирачка160,00 ммДиаметър на спирачния барабан граница на износване заден мост229,50 ммДебелина на спирачната накладка граница на износване преден мостбез задна пластина3,00 ммДебелина на спирачната накладка граница на износване заден мостсъс спирачка за стъклата, без задна пластина3,00 ммДебелина на спирачната накладка граница на износване заден мостРъчна спирачка, без задна пластина1,50 ммСпирачен диск диаметър преден мост286,00 ммСпирачен диск диаметър заден мост280,00 ммЕлектроникаОбщи сведения за електрическата частНапрежение на акумулатора12 волтаКонсумативиКоличество запълващи вещества и спецификацииДвигателно масло с филтър5,50 литраДвигателно масло с филтърс датчик за нивото на маслото5,00 литраВискозност моторно маслоBMW Longlife -010W-30, 0W-40, 5W-30, 5W-40Вискозност моторно маслоBMW Longlife -04SAE 0W-30|SAE 0W-40|SAE 5W-30|SAE 5W-40Вискозност моторно маслоBMW Longlife -98SAE 0W-30|SAE 0W-40|SAE 5W-30|SAE 5W-40Спецификация двигателно маслоВариант 1BMW Longlife-04Спецификация двигателно маслоВариант 2BMW Longlife-01Спецификация двигателно маслоВариант 3BMW Longlife-98Масло за скоростната кутияСкоростна кутия S5D 200G, Скоростна кутия S5D 250G, Ново запълване1,10 литраМасло за скоростната кутияСкоростна кутия S5D 200G, Скоростна кутия S5D 250G, Количество за смяна1,00 литраМасло за скоростната кутияСкоростна кутия S5D 260Z, Скоростна кутия S5D 310Z, Ново запълване1,30 литраМасло за скоростната кутияСкоростна кутия S5D 260Z, Скоростна кутия S5D 310Z, Количество за смяна1,20 литраСпецификация масло за скоростна кутияMTF-LT-2Масло за автоматична скоростна кутияСкоростна кутия A4S 270R, Скоростна кутия A4S 310R, Ново запълване8,80 литраМасло за автоматична скоростна кутияСкоростна кутия A4S 270R, Скоростна кутия A4S 310R, Количество за смяна3,00 литраМасло за автоматична скоростна кутияСкоростна кутия A5S 300J, Скоростна кутия A5S 310Z, Количество за смяна3,00 литраМасло за автоматична скоростна кутияСкоростна кутия A5S 300J, Скоростна кутия A5S 310Z, Ново запълване7,80 литраСпецификация масло за автоматична скоростна кутияОригинално маслоДиференциално масло заден мостОс 168N1,10 литраДиференциално масло заден мостОс 188N1,70 литраСпецификация масло за заден мостОригинално маслоМасло за сервоуправлението1,20 литраСпецификация масло за сервоуправлението>Антифриз7,50 литраСпецификация охладителна течностСредства за защита от замръзване на основата на етиленгликолСпирачна течност при смяна1,20 литраСпецификация спирачна течностDOT 4Средства за охлаждане климатична инсталацияПлосък тръбен кондензатор800 - 850 грамаСредства за охлаждане климатична инсталацияКръгъл тръбен кондензатор975 - 1025 грамаСпецификация охлаждащи средстваR134aОсветлениеПредни фаровеСветлини за дневно каранеПринадлежащи артикулиDAY1Задни фаровеВътрешни лампиЛампа при качванеПринадлежащи артикулиEntry1Интервали за смянаЗа сервизни данниВъздушен филтър интервал за смянапри всеки 2. сервизФилтър за гориво интервал за смянапри всеки 2. сервизСпирачна течност интервал за смянана всеки 2 годиниОхлаждащи средства за двигателя интервал за смянаот 1998/09 и нагорена всеки 4 годиниОхлаждащи средства за двигателя интервал за смянадо 1998/08на всеки 3 годиниМасло за предавателна кутия интервал за смянадо 1997/08при всеки 2. сервиз IIТрансмисионно масло за заден мост интервал за смянадо 1997/08при всеки 2. сервиз IIМоторно масло и филтър интервал за смянапри всеки сервизПроверете каросерията и дъното на купетона всеки 2 годиниФилтър купе интервал за смянапри всеки сервизИзбраното МПС е успешно добавено във вашия гараж. +-
Огромен избор Над 800 000 авточасти
-
Купи на кредит с ТБИ Минимална сума 150 лв.
-
Експресна доставка Наложен платеж и преглед
-
14 дни срок Връщане или замяна
ТОП производители
Magdalena Veleva26 April 2024Teodor Boychev26 April 2024Ivan Peev26 April 2024Александър Тасев24 April 2024Татяна Стефанова23 April 2024Strahil Valev23 April 2024