ARP болтове и шпилки Honda за Honda Civic 6 Fastback (MA) 1.4 i (MA8, MB2) - 75 коня бензин D14A5, D14A7, D14Z3 - онлайн магазин
.jpg)
75 к.с - бензин
09.1995 - 02.2001
-
ARP 2000 5/16" connecting rod screws in 38.1mm length.
Universally applicable for all H-shank connecting rods.
ARP connecting rod bolts have been developed for the highest requirements and offer optimum safety.
The connecting rod bolts are heat treated and rolled, which gives them up to 10 times higher fatigue strength.
Especially for tuned engines highly recommended!
Connecting rod bearings best to replace directly with.A 3/8" nut should be used for installation.
More information on the correct tightening of the connecting rod bolts HERE
-
ARP 5/16 "rod bolts with 38,1mm in length.
Universally applicable for all H-Beam conrods .
ARP custom age 625 + have been developed for the highest requirements and provide optimum safety.
At high engine speed, it arrives at the Aufwertsbewegung the piston to high tensile forces acting on the connecting rod according to Kurbelwellenhub more or less.
To avoid this, a screw is recommended Pleulschraube tear as it has a tensile strength of 260-280 PSI, compared to having only a 2000 ARP Zugfestigkit of 220 PSI
The rod bolts are heat treated and rolled, giving them up to 10 times higher fatigue strength.
Especially for tuned engines highly recommended!
Best exchange directly connecting rod bearings.
(Price for one Bolt.)More information on how to properly tighten the connecting rod bolts
-
Digital High End Dial Indicator from ARP for measuring the extension of expansion screws.
When fitting connecting rod bolts, the tightening torque is only of secondary importance. Much more important is the extension of the screw.
This stretch can be measured accurately with the ARP dial gauge.
ARP has taken accuracy to the next level with the introduction of a digital stretch gauge that measures to the ten-thousandth (0.0001-inch).
Accurate readings are made by opposing ball and pin probes centered on the bolt. A uniquely designed aluminum handle facilitates operation.
ALWAYS fit and tighten connecting rod bolts with sufficient ARP Ultra Torque Paste!
For further information about assambling rod bolts correctly, click here
Here is our video on the correct installation of connecting rods and connecting rod bolts:
ARP strech gauge for a perfect conrod bolts assembly. If you want to torque your conrod bolts in a professional way you have to measure the strech and not the torque. This ARP gauge is individually adjustable to measure each kind of conrod bolts. Always use ARP ultra torque grease for conrod assembly.
Here is our video on the correct installation of connecting rods and connecting rod bolts:
"Spezial ARP ultra torque assembly lubricant for professional fittment of each kind of ARP bolts or studs.
All ARP bolts and studs threads should be thigthen up with this ARP Moly Assembly Lubricant called ultra torque to mentain correct torques specifications.
All ARP kit have this lubricant included.
"
"Spezial ARP ultra torque assembly lubricant for professional fittment of each kind of ARP bolts or studs.
All ARP bolts and studs threads should be thigthen up with this ARP Moly Assembly Lubricant called ultra torque to mentain correct torques specifications.
Big can (approx. 350 gramms) with brush included.
"
ARP Main Stud Kit for HONDA/ACURA 1.6L (B16A & VTEC) (12pt nuts).
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Main Stud Kit for HONDA/ACURA 1.8L (B18C1).
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Conrod bolt kit for Honda/Acura 2.0L (K20A).
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
ARP Main Stud Kit for HONDA/ACURA 2.2L (H22A) & 2.3L (H23A) (12pt nuts).
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
-Due to advanced manufacturing processes ARP studs reach highest strength and stability.
-Tensile strength of 200.000 psi (13,8t/cm²).
-Absolutely perfectly round and straight studs for a first-class assembly.
-All kits come with ARP hardened washers and high quality nuts.
-Harder, more durable, stable, and processed better than any OEM products.
-10 times stronger threads than the competetive products by thread cut after curing.
-Highest ARP quality product for professional use.
-Fully reusable.
(Click on the PDF box to download instruction)
ARP conrod bolt set for Honda/Acura 3.0L (C30A) V6 Acura NSX M9.
Forged from high-strength chrome moly steel with 200,000 psi tensile strength nearly twice as strong as the best factory OEM stock bolts.- Perfectly rolled threads are virtually indestructible with the material used.
- These bolts are especially recommended for tuned engines.
ARP - world leader in the field of engine bolts produces top products of unparalleled quality, unsurpassed strength and forged to the nanometer.
ARP conrod Bolt Set for Honda/Acura 3.0L (C32B) V6 Acura NSX M8.
Forged from high-strength chrome moly steel with 200,000 psi tensile strength nearly twice as strong as the best factory OEM stock bolts.- Perfectly rolled threads are virtually indestructible with the material used.
- These bolts are especially recommended for tuned engines.
ARP - world leader in the field of engine bolts produces top products of unparalleled quality, unsurpassed strength and forged to the nanometer.
ARP Head Stud Kit for HONDA/ACURA B16A.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP 12pt Head Stud Kit for HONDA/ACURA B18A1, M11.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for HONDA/ACURA B20B, with B16A HEAD.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for HONDA/ACURA D16A & D16Z-5 only M10.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for HONDA/ACURA Civic D16Y.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for HONDA/ACURA F20 S2000.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for HONDA/ACURA H22 A4 VTEC.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for HONDA/ACURA H23A.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for HONDA/ACURA K20A (A2 & A3).
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP 12pt Head Stud Kit for HONDA/ACURA VTEC B18C1, M11, GSR.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
M10 x 1.25 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M10 x 1.25 x 20 20 mm n.a. M10 x 1.25 x 25 25 mm n.a. M10 x 1.25 x 30 30 mm n.a. M10 x 1.25 x 35 35 mm n.a. M10 x 1.25 x 40 26 mm 14 mm M10 x 1.25 x 45 26 mm 19 mm M10 x 1.25 x 50 26 mm 24 mm M10 x 1.25 x 60 26 mm 34 mm M10 x 1.25 x 70 26 mm 44 mm M10 x 1.25 x 80 26 mm 54 mm M10 x 1.25 x 90 26 mm 64 mm M10 x 1.25 x 100 26 mm 74 mm
M10 x 1.50 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M10 x 1.50 x 20 20 mm n.a. M10 x 1.50 x 25 25 mm n.a. M10 x 1.50 x 30 30 mm n.a. M10 x 1.50 x 35 35 mm n.a. M10 x 1.50 x 40 26 mm 14 mm M10 x 1.50 x 45 26 mm 19 mm M10 x 1.50 x 50 26 mm 24 mm M10 x 1.50 x 60 26 mm 34 mm M10 x 1.50 x 65 26 mm 39 mm M10 x 1.50 x 70 26 mm 44 mm M10 x 1.50 x 80 26 mm 54 mm M10 x 1.50 x 90 26 mm 64 mm M10 x 1.50 x 100 26 mm 74 mm
M12 x 1.50 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M12 x 1.50 x 25 25 mm n.a. M12 x 1.50 x 30 30 mm n.a. M12 x 1.50 x 35 30 mm 5 mm M12 x 1.50 x 40 30 mm 10 mm M12 x 1.50 x 45 30 mm 15 mm M12 x 1.50 x 50 30 mm 20 mm M12 x 1.50 x 60 30 mm 30 mm M12 x 1.50 x 70 30 mm 40 mm M12 x 1.50 x 80 30 mm 50 mm M12 x 1.50 x 90 30 mm 60 mm M12 x 1.50 x 100 30 mm 70 mm
M12 x 1.75 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M12 x 1.75 x 25 25 mm n.a. M12 x 1.75 x 30 30 mm n.a. M12 x 1.75 x 35 30 mm 5 mm M12 x 1.75 x 40 30 mm 10 mm M12 x 1.75 x 45 30 mm 15 mm M12 x 1.75 x 50 30 mm 20 mm M12 x 1.75 x 60 30 mm 30 mm M12 x 1.75 x 70 30 mm 40 mm M12 x 1.75 x 80 30 mm 50 mm M12 x 1.75 x 90 30 mm 60 mm M12 x 1.75 x 100 30 mm 70 mm
M6 x 1.00 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M6 x 1.00 x 12 12 mm n.a. M6 x 1.00 x 16 16 mm n.a. M6 x 1.00 x 20 20 mm n.a. M6 x 1.00 x 25 25 mm n.a. M6 x 1.00 x 30 18 mm 12 mm M6 x 1.00 x 35 18 mm 17 mm M6 x 1.00 x 40 18 mm 22 mm M6 x 1.00 x 45 18 mm 27 mm M6 x 1.00 x 50 18 mm 32 mm M6 x 1.00 x 55 18 mm 37 mm M6 x 1.00 x 60 18 mm 42 mm M6 x 1.00 x 65 18 mm 47 mm M6 x 1.00 x 70 18 mm 52 mm M6 x 1.00 x 75 18 mm 57 mm M6 x 1.00 x 80 18 mm 62 mm M6 x 1.00 x 90 18 mm 72 mm M6 x 1.00 x 100 18 mm 82 mm M6 x 1.00 x 135 18 mm 117 mm
M8 x 1.25 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M8 x 1.25 x 12 12 mm n.a. M8 x 1.25 x 16 16 mm n.a. M8 x 1.25 x 20 20 mm n.a. M8 x 1.25 x 25 25 mm n.a. M8 x 1.25 x 30 22 mm 8 mm M8 x 1.25 x 35 22 mm 13 mm M8 x 1.25 x 40 22 mm 18 mm M8 x 1.25 x 45 22 mm 23 mm M8 x 1.25 x 50 22 mm 28 mm M8 x 1.25 x 55 22 mm 33 mm M8 x 1.25 x 60 22 mm 38 mm M8 x 1.25 x 65 22 mm 43 mm M8 x 1.25 x 70 22 mm 48 mm M8 x 1.25 x 75 22 mm 53 mm M8 x 1.25 x 80 22 mm 58 mm M8 x 1.25 x 85 22 mm 63 mm M8 x 1.25 x 90 22 mm 68 mm M8 x 1.25 x 100 22 mm 78 mm
ARP Flywheel bolt kit for Opel/Vauxhall 2.0L 16V.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.- Perfectly crafted rolled threads from indestructible material.
- These bolts are ideal for tuned engines and are highly recommended by higher tourqe.
- Set of 8 pcs of high-strenght bolts
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
Single nut for all ARP studs. Should you ever lose one, no problem.
- 100% reusable
- Stainless
- Extremely temperature resistant
Price for a nut with a washer
Single nut in our high boost version for almost all stud bolt from ARP. Should you ever lose or damage one, no problem.
- 100% reusable
- stainless
- extremely temperature resistant
Price for one nut.
Spezial tool to fit ARP studs in the Cylinder head.
Some kits from ARP may include this tool, but we just sell it always seperately. This makes the kits much more cheaper in the end.
This tool is needed for the 1.8T engine.
Internal multi-tooth socket for mounting ARP nuts and bolts.
12 square socket with 1/2 inch drive for tightening ARP nuts. This ARP tool is available in different sizes and is needed for the assembly of all ARP stud bolt and screws.
Available in the following sizes: 8-20mm
Спирачна системаСпирачна система - Honda Civic 6 Fastback (MA) 1.4 i (MA8, MB2)ЗатвориОкачване на колелатаОкачване на колелата - Honda Civic 6 Fastback (MA) 1.4 i (MA8, MB2)ЗатвориКормилна системаКормилна система - Honda Civic 6 Fastback (MA) 1.4 i (MA8, MB2)ЗатвориЗадвижване на колелатаЗадвижване на колелата - Honda Civic 6 Fastback (MA) 1.4 i (MA8, MB2)ЗатвориТрансмисияТрансмисия - Honda Civic 6 Fastback (MA) 1.4 i (MA8, MB2)ЗатвориРемъчно задвижванеРемъчно задвижване - Honda Civic 6 Fastback (MA) 1.4 i (MA8, MB2)ЗатвориЧасти за двигателЧасти за двигател - Honda Civic 6 Fastback (MA) 1.4 i (MA8, MB2)ЗатвориЧасти за цилиндров блокЧасти за цилиндров блок - Honda Civic 6 Fastback (MA) 1.4 i (MA8, MB2)ЗатвориГарнитуриГарнитури - Honda Civic 6 Fastback (MA) 1.4 i (MA8, MB2)ЗатвориОхладителна системаОхладителна система - Honda Civic 6 Fastback (MA) 1.4 i (MA8, MB2)ЗатвориКлиматична системаКлиматична система - Honda Civic 6 Fastback (MA) 1.4 i (MA8, MB2)ЗатвориОтопление и вентилацияОтопление и вентилация - Honda Civic 6 Fastback (MA) 1.4 i (MA8, MB2)ЗатвориФилтриФилтри - Honda Civic 6 Fastback (MA) 1.4 i (MA8, MB2)ЗатвориМасла и течностиМасла и течности - Honda Civic 6 Fastback (MA) 1.4 i (MA8, MB2)ЗатвориЗапалителна системаЗапалителна система - Honda Civic 6 Fastback (MA) 1.4 i (MA8, MB2)ЗатвориДатчици и сензориДатчици и сензори - Honda Civic 6 Fastback (MA) 1.4 i (MA8, MB2)ЗатвориГоривна системаГоривна система - Honda Civic 6 Fastback (MA) 1.4 i (MA8, MB2)ЗатвориЕлектрическа системаЕлектрическа система - Honda Civic 6 Fastback (MA) 1.4 i (MA8, MB2)ЗатвориСтартова системаСтартова система - Honda Civic 6 Fastback (MA) 1.4 i (MA8, MB2)ЗатвориПочистване на стъклатаПочистване на стъклата - Honda Civic 6 Fastback (MA) 1.4 i (MA8, MB2)ЗатвориАуспуси и гърнетаАуспуси и гърнета - Honda Civic 6 Fastback (MA) 1.4 i (MA8, MB2)ЗатвориЕдрогабаритни частиЕдрогабаритни части - Honda Civic 6 Fastback (MA) 1.4 i (MA8, MB2)ЗатвориСветлиниСветлини - Honda Civic 6 Fastback (MA) 1.4 i (MA8, MB2)ЗатвориИнтериорИнтериор - Honda Civic 6 Fastback (MA) 1.4 i (MA8, MB2)ЗатвориДобавкиДобавки - Honda Civic 6 Fastback (MA) 1.4 i (MA8, MB2)ЗатвориТунингТунинг - Honda Civic 6 Fastback (MA) 1.4 i (MA8, MB2)ЗатвориАвтоаксесоариАвтоаксесоари - Honda Civic 6 Fastback (MA) 1.4 i (MA8, MB2)ЗатвориЗадължително оборудванеЗадължително оборудване - Honda Civic 6 Fastback (MA) 1.4 i (MA8, MB2)ЗатвориИнструментиИнструменти - Honda Civic 6 Fastback (MA) 1.4 i (MA8, MB2)ЗатвориТехнически характеристики
Общи данни
Запалителна система
Система за гориво
Контролни стойности за изгорелите газове
Данни за ходовата част
Спирачна уредба
Електроника
Консумативи
Осветление
Интервали за смянаОбщи данниОбщи сведения основни стойностиВид на управлението на двигателяАнгренажен ремъкОбороти при макс. въртящ момент3000 1/minХод79,00 ммВътрешен диаметър на цилиндъра75,00 ммВентили за един цилиндър4Луфт на вентила - всмукателен клапанДвигател студен0,18 - 0,22 ммЛуфт на вентила - изпускателен клапанДвигател студен0,23 - 0,27 ммЪгъл на гнездото на вентила - всмукателен клапан45°Ъгъл на гнездото на вентила - изпускателен клапан45°Диаметър на стъблото на вентила - всмукателен клапан5,480 - 5,490 ммКоличество на нужните запалителни свещи/нагревателни свещи4Последователност на запалване1-3-4-2Налягане при сгъстяване9,3 - 12,7 barОхладителна системаТермостатът отваря при температура76° - 80°Запалителна системаЗапалителна система стойностиМомент на запалване-16°00'±2°00' - преди ГМТ + след ГМТ- преди ГМТ /+ след ГМТРазстояние между електродите1,05±0,05 ммЗапалителни свещи/нагревателни свещи NGKZFR5F - 11Вторично съпротивление - запалваща бобина28000±6000 OhmПървично съпротивление запалваща бобина0,50±0,10Система за горивоСистема за гориво общи сведенияВид на моторното горивоБензинОбработка на сместа обозначениеВпръскване на бензинОбработка на сместа производителHondaОбработка на сместа типPGM FIНалягане на системата2,80 - 3,30 barбез понижено наляганеКонтролни стойности за изгорелите газовеОбщи стойности, съществени за изгорелите газовеОбороти на празен ход при скоростната кутия700 - 800 1/minМинимална температура на моторното масло при AU80 °CСтойности за изгорелите газове бензинМомент на запалване-16°00'±2°00' - преди ГМТ + след ГМТ- преди ГМТ /+ след ГМТСъдържание на CO-при празен ход0,50 %Повишени обороти при празен ход2300 - 2700 1/minСъдържание на CO-при повишен празен ход0,30 %Максимално съдържание на HC-при празен ход100 ppmСтойност ламбда0,97 - 1,03 λДанни за ходовата частДжанти и гумиНалягане при пълнене на гумите отпред175/65 R 142,10 barНалягане при пълнене на гумите отзад175/65 R 142,20 barХодова част размериБаза2620 ммКоловоз предни колела1475 ммКоловоз задни колела1465 ммСпирачна уредбаИзмерения на спирачкатаДебелина на спирачния диск преден мост21,00 ммДебелина на спирачния диск граница на износване преден мостДискова спирачка с вътрешна вентилация19,00 ммДебелина на спирачния диск заден мост10,00 ммДебелина на спирачния диск граница на износване заден мост8,00 ммДиаметър на спирачния барабан заден мост203,20 - 203,33 ммДиаметър на спирачния барабан граница на износване заден мост204,00 ммДебелина на спирачната накладка преден мостбез задна пластина11,70 ммДебелина на спирачната накладка заден мостбез задна пластина8,00 ммДебелина на спирачните накладки ръчна спирачка5,00 ммДебелина на спирачната накладка граница на износване преден мостбез задна пластина1,60 ммДебелина на спирачната накладка граница на износване заден мостбез задна пластина1,60 ммДебелина на спирачните накладки граница на износване ръчна спирачка2,00 ммЕлектроникаОбщи сведения за електрическата частНапрежение на акумулатора12 волтаКапацитет на акумулатора45 AhАлтернатор производителBOSCHЗаряден ток за алтернатора75 ампераНапрежение на регулатора13,50 волтаСтартер производителVALEOМощност на стартера1,00 киловатаКонсумативиКоличество запълващи вещества и спецификацииДвигателно масло с филтър3,30 литраВискозност моторно маслоAPI SG10W-40, 15W-40, 20W-50Вискозност моторно маслоAPI SHSAE 10W-30|SAE 10W-40|SAE 15W-40|SAE 15W-50|SAE 20W-50Вискозност моторно маслоAPI SJSAE 0W-30|SAE 0W-40|SAE 10W-40|SAE 15W-40|SAE 20W-50Спецификация двигателно маслоAPI SG|API SH|API SJМасло за скоростната кутияКоличество за смяна1,80 литраСпецификация масло за скоростна кутияMTFМасло за автоматична скоростна кутияНово запълване5,90 литраМасло за автоматична скоростна кутияКоличество за смяна2,70 литраСпецификация масло за автоматична скоростна кутияATF Dexron IIIМасло за сервоуправлението1,00 литраСпецификация масло за сервоуправлениетоOriginal Honda ÖlАнтифриз4,50 литраСпецификация охладителна течностOriginal FrostschutzmittelСпирачна течност при смяна1,20 литраСпецификация спирачна течностDOT 3|DOT 4Средства за охлаждане климатична инсталация500 - 550 грамаСпецификация охлаждащи средстваR134aСпецификация охлаждащо маслоSP 10Обем на резервоара за гориво55 литраОсветлениеПредни фаровеКъси светлиниH4 12V 60/55W P43t
Дълги светлиниH4 12V 60/55W P43tСветлини за дневно каранеПринадлежащи артикулиDAY1ГабаритиW5W 12V 5W W2,1x9,5d LonglifeФарове за мъглаH3 12V 55W PK22sМигач преденW21W 12V 21W W3x16dМигач страниченW5W 12V 5W W2,1x9,5dЗадни фаровеМигач заденP21W 12V 21W BA15sЗадна светлинаP21/5W 12V 21/5W BAY15dСтопP21/5W 12V 21/5W BAY15dСветлини за обратен ходP21W 12V 21W BA15sЗадни фарове за мъглаP21W 12V 21W BA15sОсветление на табелата с регистрационния номерW5W 12V 5W W2,1x9,5dВътрешни лампиВътрешно осветлениеC5W 12V 5W SV8,5 (11x35)Интервали за смянаЗа сервизни данниУправление на двигателя със зъбчат ремък променлив интервалдо 1998на всеки 100.000 km / 5 годиниУправление на двигателя със зъбчат ремък променлив интервалот 1999 и нагорена всеки 120.000 km / 8 годиниУправление на двигателя със зъбчат ремък режим на контролне е предписано от производителяВъздушен филтър интервал за смянадо 1998на всеки 40.000 km / 2 годиниВъздушен филтър интервал за смянаот 1999 и нагорена всеки 45.000 km / 3 годиниФилтър за гориво интервал за смянадо 1998на всеки 40.000 km / 2 годиниФилтър за гориво интервал за смянаот 1999 и нагорена всеки 45.000 km / 3 годиниЗапалителни свещи интервал за смянадо 1998на всеки 40.000 km / 2 годиниЗапалителни свещи интервал за смянаот 1999 и нагорена всеки 45.000 km / 3 годиниСпирачна течност интервал за смянадо 1998на всеки 60.000 km / 3 годиниСпирачна течност интервал за смянаот 1999 и нагорена всеки 3 годиниОхлаждащи средства за двигателя интервал за смянадо 1998първо на 80.000 km / 4 години, след това всяка 40.000 km / 2 годинаОхлаждащи средства за двигателя интервал за смянаот 1999 и нагорепърво на 75.000 km / 5 години, след това всяка 45.000 km / 3 годинаМасло за предавателна кутия интервал за смянадо 1998на всеки 80.000 km / 4 годиниМасло за предавателна кутия интервал за смянаот 1999 и нагорена всеки 120.000 km / 8 годиниМасло на предавателна кутия - контролен режимдо 1998първо на 40.000 km / 2 години, след това всяка 80.000 km / 4 годинаМасло на предавателна кутия - контролен режимот 1999 и нагорееднократно при 60.000 km / 4 годиниМасло за автоматична скоростна кутия интервал за смянадо 1998на всеки 80.000 km / 4 годиниМасло за автоматична скоростна кутия интервал за смянаот 1999 и нагорена всеки 75.000 km / 5 годиниМасло за автоматична скоростна кутия пробен режимот 1999 и нагорепърво на 45.000 km / 3 години, след това всяка 75.000 km / 5 годинаМасло за автоматична скоростна кутия пробен режимдо 1998на всеки 40.000 km / 2 годиниМоторно масло и филтър интервал за смянадо 1998на всеки 10.000 km / веднъж годишноМоторно масло и филтър интервал за смянаот 1999 и нагорена всеки 15.000 km / веднъж годишноФилтър купе интервал за смянаот 1999 и нагорена всяка 30.000 km / 1 годинаЛуфт на клапана - проверочен режим.до 1998еднократно при 40.000 kmЛуфт на клапана - проверочен режим.от 1999 и нагорена всеки 45.000 km / 3 годиниИзбраното МПС е успешно добавено във вашия гараж. +
![ARP Custom Age 625+ 5/16" Connection Bolts with 1.5" lenghts ARP arp3006708 Honda Civic 6 Fastback (MA) 1.4 i (MA8, MB2)](images/arp-custom-age-625+-5/16"-connection-bolts-with-1.5"-lenghts-imageaplist-5243-3861780.jpg)
-
Огромен избор Над 800 000 авточасти
-
Купи на кредит с ТБИ Минимална сума 150 лв.
-
Експресна доставка Наложен платеж и преглед
-
14 дни срок Връщане или замяна
ТОП производители
