ARP болтове и шпилки Honda за Honda CR-V 4 (RE) 2.0 iVtec (RE5, RM1) - 155 коня бензин R20A5, R20A6, R20A9 - онлайн магазин
155 к.с - бензин
10.2012 - 12.2018
-
ARP 2000 5/16" connecting rod screws in 38.1mm length.
Universally applicable for all H-shank connecting rods.
ARP connecting rod bolts have been developed for the highest requirements and offer optimum safety.
The connecting rod bolts are heat treated and rolled, which gives them up to 10 times higher fatigue strength.
Especially for tuned engines highly recommended!
Connecting rod bearings best to replace directly with.A 3/8" nut should be used for installation.
More information on the correct tightening of the connecting rod bolts HERE
-
ARP 5/16 "rod bolts with 38,1mm in length.
Universally applicable for all H-Beam conrods .
ARP custom age 625 + have been developed for the highest requirements and provide optimum safety.
At high engine speed, it arrives at the Aufwertsbewegung the piston to high tensile forces acting on the connecting rod according to Kurbelwellenhub more or less.
To avoid this, a screw is recommended Pleulschraube tear as it has a tensile strength of 260-280 PSI, compared to having only a 2000 ARP Zugfestigkit of 220 PSI
The rod bolts are heat treated and rolled, giving them up to 10 times higher fatigue strength.
Especially for tuned engines highly recommended!
Best exchange directly connecting rod bearings.
(Price for one Bolt.)More information on how to properly tighten the connecting rod bolts
-
Digital High End Dial Indicator from ARP for measuring the extension of expansion screws.
When fitting connecting rod bolts, the tightening torque is only of secondary importance. Much more important is the extension of the screw.
This stretch can be measured accurately with the ARP dial gauge.
ARP has taken accuracy to the next level with the introduction of a digital stretch gauge that measures to the ten-thousandth (0.0001-inch).
Accurate readings are made by opposing ball and pin probes centered on the bolt. A uniquely designed aluminum handle facilitates operation.
ALWAYS fit and tighten connecting rod bolts with sufficient ARP Ultra Torque Paste!
For further information about assambling rod bolts correctly, click here
Here is our video on the correct installation of connecting rods and connecting rod bolts:
ARP strech gauge for a perfect conrod bolts assembly. If you want to torque your conrod bolts in a professional way you have to measure the strech and not the torque. This ARP gauge is individually adjustable to measure each kind of conrod bolts. Always use ARP ultra torque grease for conrod assembly.
Here is our video on the correct installation of connecting rods and connecting rod bolts:
"Spezial ARP ultra torque assembly lubricant for professional fittment of each kind of ARP bolts or studs.
All ARP bolts and studs threads should be thigthen up with this ARP Moly Assembly Lubricant called ultra torque to mentain correct torques specifications.
All ARP kit have this lubricant included.
""Spezial ARP ultra torque assembly lubricant for professional fittment of each kind of ARP bolts or studs.
All ARP bolts and studs threads should be thigthen up with this ARP Moly Assembly Lubricant called ultra torque to mentain correct torques specifications.
Big can (approx. 350 gramms) with brush included.
"ARP Main Stud Kit for HONDA/ACURA 1.6L (B16A & VTEC) (12pt nuts).
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Main Stud Kit for HONDA/ACURA 1.8L (B18C1).
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Conrod bolt kit for Honda/Acura 2.0L (K20A).
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.ARP Main Stud Kit for HONDA/ACURA 2.2L (H22A) & 2.3L (H23A) (12pt nuts).
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
-Due to advanced manufacturing processes ARP studs reach highest strength and stability.
-Tensile strength of 200.000 psi (13,8t/cm²).
-Absolutely perfectly round and straight studs for a first-class assembly.
-All kits come with ARP hardened washers and high quality nuts.
-Harder, more durable, stable, and processed better than any OEM products.
-10 times stronger threads than the competetive products by thread cut after curing.
-Highest ARP quality product for professional use.
-Fully reusable.
(Click on the PDF box to download instruction)ARP conrod bolt set for Honda/Acura 3.0L (C30A) V6 Acura NSX M9.
Forged from high-strength chrome moly steel with 200,000 psi tensile strength nearly twice as strong as the best factory OEM stock bolts.- Perfectly rolled threads are virtually indestructible with the material used.
- These bolts are especially recommended for tuned engines.
ARP - world leader in the field of engine bolts produces top products of unparalleled quality, unsurpassed strength and forged to the nanometer.
ARP conrod Bolt Set for Honda/Acura 3.0L (C32B) V6 Acura NSX M8.
Forged from high-strength chrome moly steel with 200,000 psi tensile strength nearly twice as strong as the best factory OEM stock bolts.- Perfectly rolled threads are virtually indestructible with the material used.
- These bolts are especially recommended for tuned engines.
ARP - world leader in the field of engine bolts produces top products of unparalleled quality, unsurpassed strength and forged to the nanometer.
ARP Head Stud Kit for HONDA/ACURA B16A.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP 12pt Head Stud Kit for HONDA/ACURA B18A1, M11.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for HONDA/ACURA B20B, with B16A HEAD.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for HONDA/ACURA D16A & D16Z-5 only M10.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for HONDA/ACURA Civic D16Y.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for HONDA/ACURA F20 S2000.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for HONDA/ACURA H22 A4 VTEC.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for HONDA/ACURA H23A.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for HONDA/ACURA K20A (A2 & A3).
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP 12pt Head Stud Kit for HONDA/ACURA VTEC B18C1, M11, GSR.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
M10 x 1.25 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M10 x 1.25 x 20 20 mm n.a. M10 x 1.25 x 25 25 mm n.a. M10 x 1.25 x 30 30 mm n.a. M10 x 1.25 x 35 35 mm n.a. M10 x 1.25 x 40 26 mm 14 mm M10 x 1.25 x 45 26 mm 19 mm M10 x 1.25 x 50 26 mm 24 mm M10 x 1.25 x 60 26 mm 34 mm M10 x 1.25 x 70 26 mm 44 mm M10 x 1.25 x 80 26 mm 54 mm M10 x 1.25 x 90 26 mm 64 mm M10 x 1.25 x 100 26 mm 74 mm M10 x 1.50 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M10 x 1.50 x 20 20 mm n.a. M10 x 1.50 x 25 25 mm n.a. M10 x 1.50 x 30 30 mm n.a. M10 x 1.50 x 35 35 mm n.a. M10 x 1.50 x 40 26 mm 14 mm M10 x 1.50 x 45 26 mm 19 mm M10 x 1.50 x 50 26 mm 24 mm M10 x 1.50 x 60 26 mm 34 mm M10 x 1.50 x 65 26 mm 39 mm M10 x 1.50 x 70 26 mm 44 mm M10 x 1.50 x 80 26 mm 54 mm M10 x 1.50 x 90 26 mm 64 mm M10 x 1.50 x 100 26 mm 74 mm M12 x 1.50 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M12 x 1.50 x 25 25 mm n.a. M12 x 1.50 x 30 30 mm n.a. M12 x 1.50 x 35 30 mm 5 mm M12 x 1.50 x 40 30 mm 10 mm M12 x 1.50 x 45 30 mm 15 mm M12 x 1.50 x 50 30 mm 20 mm M12 x 1.50 x 60 30 mm 30 mm M12 x 1.50 x 70 30 mm 40 mm M12 x 1.50 x 80 30 mm 50 mm M12 x 1.50 x 90 30 mm 60 mm M12 x 1.50 x 100 30 mm 70 mm M12 x 1.75 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M12 x 1.75 x 25 25 mm n.a. M12 x 1.75 x 30 30 mm n.a. M12 x 1.75 x 35 30 mm 5 mm M12 x 1.75 x 40 30 mm 10 mm M12 x 1.75 x 45 30 mm 15 mm M12 x 1.75 x 50 30 mm 20 mm M12 x 1.75 x 60 30 mm 30 mm M12 x 1.75 x 70 30 mm 40 mm M12 x 1.75 x 80 30 mm 50 mm M12 x 1.75 x 90 30 mm 60 mm M12 x 1.75 x 100 30 mm 70 mm M6 x 1.00 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M6 x 1.00 x 12 12 mm n.a. M6 x 1.00 x 16 16 mm n.a. M6 x 1.00 x 20 20 mm n.a. M6 x 1.00 x 25 25 mm n.a. M6 x 1.00 x 30 18 mm 12 mm M6 x 1.00 x 35 18 mm 17 mm M6 x 1.00 x 40 18 mm 22 mm M6 x 1.00 x 45 18 mm 27 mm M6 x 1.00 x 50 18 mm 32 mm M6 x 1.00 x 55 18 mm 37 mm M6 x 1.00 x 60 18 mm 42 mm M6 x 1.00 x 65 18 mm 47 mm M6 x 1.00 x 70 18 mm 52 mm M6 x 1.00 x 75 18 mm 57 mm M6 x 1.00 x 80 18 mm 62 mm M6 x 1.00 x 90 18 mm 72 mm M6 x 1.00 x 100 18 mm 82 mm M6 x 1.00 x 135 18 mm 117 mm M8 x 1.25 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M8 x 1.25 x 12 12 mm n.a. M8 x 1.25 x 16 16 mm n.a. M8 x 1.25 x 20 20 mm n.a. M8 x 1.25 x 25 25 mm n.a. M8 x 1.25 x 30 22 mm 8 mm M8 x 1.25 x 35 22 mm 13 mm M8 x 1.25 x 40 22 mm 18 mm M8 x 1.25 x 45 22 mm 23 mm M8 x 1.25 x 50 22 mm 28 mm M8 x 1.25 x 55 22 mm 33 mm M8 x 1.25 x 60 22 mm 38 mm M8 x 1.25 x 65 22 mm 43 mm M8 x 1.25 x 70 22 mm 48 mm M8 x 1.25 x 75 22 mm 53 mm M8 x 1.25 x 80 22 mm 58 mm M8 x 1.25 x 85 22 mm 63 mm M8 x 1.25 x 90 22 mm 68 mm M8 x 1.25 x 100 22 mm 78 mm ARP Flywheel bolt kit for Opel/Vauxhall 2.0L 16V.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.- Perfectly crafted rolled threads from indestructible material.
- These bolts are ideal for tuned engines and are highly recommended by higher tourqe.
- Set of 8 pcs of high-strenght bolts
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
Single nut for all ARP studs. Should you ever lose one, no problem.
- 100% reusable
- Stainless
- Extremely temperature resistant
Price for a nut with a washer
Single nut in our high boost version for almost all stud bolt from ARP. Should you ever lose or damage one, no problem.
- 100% reusable
- stainless
- extremely temperature resistant
Price for one nut.
Spezial tool to fit ARP studs in the Cylinder head.
Some kits from ARP may include this tool, but we just sell it always seperately. This makes the kits much more cheaper in the end.
This tool is needed for the 1.8T engine.Internal multi-tooth socket for mounting ARP nuts and bolts.
12 square socket with 1/2 inch drive for tightening ARP nuts. This ARP tool is available in different sizes and is needed for the assembly of all ARP stud bolt and screws.
Available in the following sizes: 8-20mm
Спирачна система - Honda CR-V 4 (RE) 2.0 iVtec (RE5, RM1)ЗатвориОкачване на колелата - Honda CR-V 4 (RE) 2.0 iVtec (RE5, RM1)ЗатвориКормилна система - Honda CR-V 4 (RE) 2.0 iVtec (RE5, RM1)ЗатвориЗадвижване на колелата - Honda CR-V 4 (RE) 2.0 iVtec (RE5, RM1)ЗатвориТрансмисия - Honda CR-V 4 (RE) 2.0 iVtec (RE5, RM1)ЗатвориРемъчно задвижване - Honda CR-V 4 (RE) 2.0 iVtec (RE5, RM1)ЗатвориЧасти за двигател - Honda CR-V 4 (RE) 2.0 iVtec (RE5, RM1)ЗатвориЧасти за цилиндров блок - Honda CR-V 4 (RE) 2.0 iVtec (RE5, RM1)ЗатвориГарнитури - Honda CR-V 4 (RE) 2.0 iVtec (RE5, RM1)ЗатвориОхладителна система - Honda CR-V 4 (RE) 2.0 iVtec (RE5, RM1)ЗатвориКлиматична система - Honda CR-V 4 (RE) 2.0 iVtec (RE5, RM1)ЗатвориОтопление и вентилация - Honda CR-V 4 (RE) 2.0 iVtec (RE5, RM1)ЗатвориФилтри - Honda CR-V 4 (RE) 2.0 iVtec (RE5, RM1)ЗатвориМасла и течности - Honda CR-V 4 (RE) 2.0 iVtec (RE5, RM1)ЗатвориЗапалителна система - Honda CR-V 4 (RE) 2.0 iVtec (RE5, RM1)ЗатвориДатчици и сензори - Honda CR-V 4 (RE) 2.0 iVtec (RE5, RM1)ЗатвориГоривна система - Honda CR-V 4 (RE) 2.0 iVtec (RE5, RM1)ЗатвориЕлектрическа система - Honda CR-V 4 (RE) 2.0 iVtec (RE5, RM1)ЗатвориСтартова система - Honda CR-V 4 (RE) 2.0 iVtec (RE5, RM1)ЗатвориПочистване на стъклата - Honda CR-V 4 (RE) 2.0 iVtec (RE5, RM1)ЗатвориАуспуси и гърнета - Honda CR-V 4 (RE) 2.0 iVtec (RE5, RM1)ЗатвориЕдрогабаритни части - Honda CR-V 4 (RE) 2.0 iVtec (RE5, RM1)ЗатвориСветлини - Honda CR-V 4 (RE) 2.0 iVtec (RE5, RM1)ЗатвориИнтериор - Honda CR-V 4 (RE) 2.0 iVtec (RE5, RM1)ЗатвориДобавки - Honda CR-V 4 (RE) 2.0 iVtec (RE5, RM1)ЗатвориТунинг - Honda CR-V 4 (RE) 2.0 iVtec (RE5, RM1)ЗатвориАвтоаксесоари - Honda CR-V 4 (RE) 2.0 iVtec (RE5, RM1)ЗатвориЗадължително оборудване - Honda CR-V 4 (RE) 2.0 iVtec (RE5, RM1)ЗатвориИнструменти - Honda CR-V 4 (RE) 2.0 iVtec (RE5, RM1)ЗатвориТехнически характеристикиОбщи данниОбщи сведения основни стойностиВид на управлението на двигателяАнгренажна веригаХод96,90 ммВътрешен диаметър на цилиндъра81,00 ммВентили за един цилиндър4Луфт на вентила - всмукателен клапанДвигател студен0,18 - 0,22 ммЛуфт на вентила - изпускателен клапанДвигател студен0,23 - 0,27 ммКоличество на нужните запалителни свещи/нагревателни свещи4Последователност на запалване1-3-4-2Налягане при сгъстяване9,00 barРазлика макс. 2 barСтепен на сгъстяване10,60 :1Минимално налягане на маслото при празен ход1,21 barКонтролна температура 80° CМаксимално забавяне глава на цилиндъра0,080 ммМинимална височина на цилиндричната глава114,95 ммОхладителна системаНалягане в охладителната система (налягане при отваряне капак на радиатора)0,93 - 1,23 barТермостатът отваря при температура80° - 84°Система за горивоСистема за гориво общи сведенияВид на моторното горивоБензинОбработка на сместа обозначениеMPIКонтролни стойности за изгорелите газовеОбщи стойности, съществени за изгорелите газовеДанни за ходовата частДжанти и гумиНалягане при пълнене на гумите отпред0,00 barвиж стикера на B -колона от страната на водачаНалягане при пълнене на гумите отзад0,00 barвиж стикера на B -колона от страната на водачаХодова част размериБаза2620 ммКоловоз предни колела1565 ммКоловоз задни колела1565 ммСпирачна уредбаИзмерения на спирачкатаДебелина на спирачния диск преден мост28,00 ммДебелина на спирачния диск граница на износване преден мост26,00 ммМаксимално странично биене на спирачния диск преден мост0,04 ммДебелина на спирачния диск заден мост10,00 ммДебелина на спирачния диск граница на износване заден мост8,00 ммМаксимално странично биене на спирачния диск заден мост0,04 ммДиаметър на спирачния барабан заден мостРъчна спирачка200,00 ммДиаметър на спирачния барабан граница на износване заден мостРъчна спирачка201,00 ммДебелина на спирачната накладка преден мостбез задна пластина12,80 ммДебелина на спирачната накладка заден мостбез задна пластина10,00 ммДебелина на спирачните накладки ръчна спирачкабез задна пластина3,00 ммДебелина на спирачната накладка граница на износване преден мостбез задна пластина1,60 ммДебелина на спирачната накладка граница на износване заден мостбез задна пластина1,60 ммДебелина на спирачните накладки граница на износване ръчна спирачкабез задна пластина1,00 ммКонсумативиКоличество запълващи вещества и спецификацииДвигателно масло с филтър3,70 литраВискозност моторно маслоACEA A3/B30W-40, 5W-30, 5W-40, 10W-40, 10W-60, 15W-40Вискозност моторно маслоACEA A5/B5SAE 0W-20|SAE 0W-30|SAE 5W-30Спецификация двигателно маслоACEA A3/B3|ACEA A5/B5Масло за скоростната кутияСкоростна кутия S6TM, Ново запълване2,00 литраМасло за скоростната кутияСкоростна кутия S6TM, Количество за смяна1,90 литраСпецификация масло за скоростна кутияСкоростна кутия S6TMMTFАнтифриз6,00 литраСпецификация охладителна течностOriginal FrostschutzmittelСпирачна течност при смяна1,10 литраСпецификация спирачна течностDOT 3|DOT 4Средства за охлаждане климатична инсталация385 - 435 грамаСпецификация охлаждащи средстваR134aМасло климатична инсталацияКлиматичен компресор80 - 90 cm³Спецификация охлаждащо маслоSP 10ОсветлениеПредни фаровеСветлини за дневно каранеLEDОригинален детайлСветлини за дневно каранеПринадлежащи артикулиDAY1ГабаритиLEDОригинален детайлЗадни фаровеЗадна светлинаLEDОригинален детайлСтопLEDОригинален детайлДопълнителни стоповеLEDОригинален детайлИнтервали за смянаЗа сервизни данниВъздушен филтър интервал за смянавсички 60.000 kmФилтър за гориво интервал за смянана всеки 120.000 km / 6 годиниЗапалителни свещи интервал за смянавсички 120.000 kmСпирачна течност интервал за смянана всеки 3 годиниОхлаждащи средства за двигателя интервал за смянапървоначално при 200.000 km / 10 години, след това на всеки 100.000 km / 5 годиниМасло за предавателна кутия интервал за смянана всеки 120.000 km / 8 годиниТрансмисионно масло за заден мост интервал за смянапърво на 120.000 km / 8 години, след това всяка 60.000 km / 4 годинаПроверете каросерията и дъното на купетоведнъж годишноЛуфт на клапана - проверочен режим.всички 100.000 kmИзбраното МПС е успешно добавено във вашия гараж. +
-
Огромен избор Над 800 000 авточасти
-
Купи на кредит с ТБИ Минимална сума 150 лв.
-
Експресна доставка Наложен платеж и преглед
-
14 дни срок Връщане или замяна