ARP болтове и шпилки Mazda за Mazda 2 Hatchback (DE) 1.5 (DE5FS) - 103 коня бензин ZY66, ZY84 - онлайн магазин
103 к.с - бензин
07.2007 - 06.2015
-
ARP 2000 5/16" connecting rod screws in 38.1mm length.
Universally applicable for all H-shank connecting rods.
ARP connecting rod bolts have been developed for the highest requirements and offer optimum safety.
The connecting rod bolts are heat treated and rolled, which gives them up to 10 times higher fatigue strength.
Especially for tuned engines highly recommended!
Connecting rod bearings best to replace directly with.A 3/8" nut should be used for installation.
More information on the correct tightening of the connecting rod bolts HERE
-
ARP 5/16 "rod bolts with 38,1mm in length.
Universally applicable for all H-Beam conrods .
ARP custom age 625 + have been developed for the highest requirements and provide optimum safety.
At high engine speed, it arrives at the Aufwertsbewegung the piston to high tensile forces acting on the connecting rod according to Kurbelwellenhub more or less.
To avoid this, a screw is recommended Pleulschraube tear as it has a tensile strength of 260-280 PSI, compared to having only a 2000 ARP Zugfestigkit of 220 PSI
The rod bolts are heat treated and rolled, giving them up to 10 times higher fatigue strength.
Especially for tuned engines highly recommended!
Best exchange directly connecting rod bearings.
(Price for one Bolt.)More information on how to properly tighten the connecting rod bolts
-
Digital High End Dial Indicator from ARP for measuring the extension of expansion screws.
When fitting connecting rod bolts, the tightening torque is only of secondary importance. Much more important is the extension of the screw.
This stretch can be measured accurately with the ARP dial gauge.
ARP has taken accuracy to the next level with the introduction of a digital stretch gauge that measures to the ten-thousandth (0.0001-inch).
Accurate readings are made by opposing ball and pin probes centered on the bolt. A uniquely designed aluminum handle facilitates operation.
ALWAYS fit and tighten connecting rod bolts with sufficient ARP Ultra Torque Paste!
For further information about assambling rod bolts correctly, click here
Here is our video on the correct installation of connecting rods and connecting rod bolts:
ARP strech gauge for a perfect conrod bolts assembly. If you want to torque your conrod bolts in a professional way you have to measure the strech and not the torque. This ARP gauge is individually adjustable to measure each kind of conrod bolts. Always use ARP ultra torque grease for conrod assembly.
Here is our video on the correct installation of connecting rods and connecting rod bolts:
"Spezial ARP ultra torque assembly lubricant for professional fittment of each kind of ARP bolts or studs.
All ARP bolts and studs threads should be thigthen up with this ARP Moly Assembly Lubricant called ultra torque to mentain correct torques specifications.
All ARP kit have this lubricant included.
""Spezial ARP ultra torque assembly lubricant for professional fittment of each kind of ARP bolts or studs.
All ARP bolts and studs threads should be thigthen up with this ARP Moly Assembly Lubricant called ultra torque to mentain correct torques specifications.
Big can (approx. 350 gramms) with brush included.
"M10 x 1.25 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M10 x 1.25 x 20 20 mm n.a. M10 x 1.25 x 25 25 mm n.a. M10 x 1.25 x 30 30 mm n.a. M10 x 1.25 x 35 35 mm n.a. M10 x 1.25 x 40 26 mm 14 mm M10 x 1.25 x 45 26 mm 19 mm M10 x 1.25 x 50 26 mm 24 mm M10 x 1.25 x 60 26 mm 34 mm M10 x 1.25 x 70 26 mm 44 mm M10 x 1.25 x 80 26 mm 54 mm M10 x 1.25 x 90 26 mm 64 mm M10 x 1.25 x 100 26 mm 74 mm M10 x 1.50 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M10 x 1.50 x 20 20 mm n.a. M10 x 1.50 x 25 25 mm n.a. M10 x 1.50 x 30 30 mm n.a. M10 x 1.50 x 35 35 mm n.a. M10 x 1.50 x 40 26 mm 14 mm M10 x 1.50 x 45 26 mm 19 mm M10 x 1.50 x 50 26 mm 24 mm M10 x 1.50 x 60 26 mm 34 mm M10 x 1.50 x 65 26 mm 39 mm M10 x 1.50 x 70 26 mm 44 mm M10 x 1.50 x 80 26 mm 54 mm M10 x 1.50 x 90 26 mm 64 mm M10 x 1.50 x 100 26 mm 74 mm M12 x 1.50 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M12 x 1.50 x 25 25 mm n.a. M12 x 1.50 x 30 30 mm n.a. M12 x 1.50 x 35 30 mm 5 mm M12 x 1.50 x 40 30 mm 10 mm M12 x 1.50 x 45 30 mm 15 mm M12 x 1.50 x 50 30 mm 20 mm M12 x 1.50 x 60 30 mm 30 mm M12 x 1.50 x 70 30 mm 40 mm M12 x 1.50 x 80 30 mm 50 mm M12 x 1.50 x 90 30 mm 60 mm M12 x 1.50 x 100 30 mm 70 mm M12 x 1.75 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M12 x 1.75 x 25 25 mm n.a. M12 x 1.75 x 30 30 mm n.a. M12 x 1.75 x 35 30 mm 5 mm M12 x 1.75 x 40 30 mm 10 mm M12 x 1.75 x 45 30 mm 15 mm M12 x 1.75 x 50 30 mm 20 mm M12 x 1.75 x 60 30 mm 30 mm M12 x 1.75 x 70 30 mm 40 mm M12 x 1.75 x 80 30 mm 50 mm M12 x 1.75 x 90 30 mm 60 mm M12 x 1.75 x 100 30 mm 70 mm M6 x 1.00 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M6 x 1.00 x 12 12 mm n.a. M6 x 1.00 x 16 16 mm n.a. M6 x 1.00 x 20 20 mm n.a. M6 x 1.00 x 25 25 mm n.a. M6 x 1.00 x 30 18 mm 12 mm M6 x 1.00 x 35 18 mm 17 mm M6 x 1.00 x 40 18 mm 22 mm M6 x 1.00 x 45 18 mm 27 mm M6 x 1.00 x 50 18 mm 32 mm M6 x 1.00 x 55 18 mm 37 mm M6 x 1.00 x 60 18 mm 42 mm M6 x 1.00 x 65 18 mm 47 mm M6 x 1.00 x 70 18 mm 52 mm M6 x 1.00 x 75 18 mm 57 mm M6 x 1.00 x 80 18 mm 62 mm M6 x 1.00 x 90 18 mm 72 mm M6 x 1.00 x 100 18 mm 82 mm M6 x 1.00 x 135 18 mm 117 mm M8 x 1.25 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M8 x 1.25 x 12 12 mm n.a. M8 x 1.25 x 16 16 mm n.a. M8 x 1.25 x 20 20 mm n.a. M8 x 1.25 x 25 25 mm n.a. M8 x 1.25 x 30 22 mm 8 mm M8 x 1.25 x 35 22 mm 13 mm M8 x 1.25 x 40 22 mm 18 mm M8 x 1.25 x 45 22 mm 23 mm M8 x 1.25 x 50 22 mm 28 mm M8 x 1.25 x 55 22 mm 33 mm M8 x 1.25 x 60 22 mm 38 mm M8 x 1.25 x 65 22 mm 43 mm M8 x 1.25 x 70 22 mm 48 mm M8 x 1.25 x 75 22 mm 53 mm M8 x 1.25 x 80 22 mm 58 mm M8 x 1.25 x 85 22 mm 63 mm M8 x 1.25 x 90 22 mm 68 mm M8 x 1.25 x 100 22 mm 78 mm ARP Main Stud Kit for MAZDA 1.6L (B6) & 1.8L (BP) DOHC Miata (12pt nuts) Acura.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for MAZDA 2.3L DOHC 16V.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Main Stud Kit MAZDA'03 2.3L DOHC 16V (2003 & later).
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Conrod bolt kit for Mazda Miata '88-'05.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.ARP Head Stud Kit for MAZDA Miata.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Flywheel bolt kit for Opel/Vauxhall 2.0L 16V.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.- Perfectly crafted rolled threads from indestructible material.
- These bolts are ideal for tuned engines and are highly recommended by higher tourqe.
- Set of 8 pcs of high-strenght bolts
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
Single nut for all ARP studs. Should you ever lose one, no problem.
- 100% reusable
- Stainless
- Extremely temperature resistant
Price for a nut with a washer
Single nut in our high boost version for almost all stud bolt from ARP. Should you ever lose or damage one, no problem.
- 100% reusable
- stainless
- extremely temperature resistant
Price for one nut.
Spezial tool to fit ARP studs in the Cylinder head.
Some kits from ARP may include this tool, but we just sell it always seperately. This makes the kits much more cheaper in the end.
This tool is needed for the 1.8T engine.Internal multi-tooth socket for mounting ARP nuts and bolts.
12 square socket with 1/2 inch drive for tightening ARP nuts. This ARP tool is available in different sizes and is needed for the assembly of all ARP stud bolt and screws.
Available in the following sizes: 8-20mm
Спирачна система - Mazda 2 Hatchback (DE) 1.5 (DE5FS)ЗатвориОкачване на колелата - Mazda 2 Hatchback (DE) 1.5 (DE5FS)ЗатвориКормилна система - Mazda 2 Hatchback (DE) 1.5 (DE5FS)ЗатвориЗадвижване на колелата - Mazda 2 Hatchback (DE) 1.5 (DE5FS)ЗатвориТрансмисия - Mazda 2 Hatchback (DE) 1.5 (DE5FS)ЗатвориРемъчно задвижване - Mazda 2 Hatchback (DE) 1.5 (DE5FS)ЗатвориЧасти за двигател - Mazda 2 Hatchback (DE) 1.5 (DE5FS)ЗатвориЧасти за цилиндров блок - Mazda 2 Hatchback (DE) 1.5 (DE5FS)ЗатвориГарнитури - Mazda 2 Hatchback (DE) 1.5 (DE5FS)ЗатвориОхладителна система - Mazda 2 Hatchback (DE) 1.5 (DE5FS)ЗатвориКлиматична система - Mazda 2 Hatchback (DE) 1.5 (DE5FS)ЗатвориОтопление и вентилация - Mazda 2 Hatchback (DE) 1.5 (DE5FS)ЗатвориФилтри - Mazda 2 Hatchback (DE) 1.5 (DE5FS)ЗатвориМасла и течности - Mazda 2 Hatchback (DE) 1.5 (DE5FS)ЗатвориЗапалителна система - Mazda 2 Hatchback (DE) 1.5 (DE5FS)ЗатвориДатчици и сензори - Mazda 2 Hatchback (DE) 1.5 (DE5FS)ЗатвориГоривна система - Mazda 2 Hatchback (DE) 1.5 (DE5FS)ЗатвориЕлектрическа система - Mazda 2 Hatchback (DE) 1.5 (DE5FS)ЗатвориСтартова система - Mazda 2 Hatchback (DE) 1.5 (DE5FS)ЗатвориПочистване на стъклата - Mazda 2 Hatchback (DE) 1.5 (DE5FS)ЗатвориАуспуси и гърнета - Mazda 2 Hatchback (DE) 1.5 (DE5FS)ЗатвориЕдрогабаритни части - Mazda 2 Hatchback (DE) 1.5 (DE5FS)ЗатвориСветлини - Mazda 2 Hatchback (DE) 1.5 (DE5FS)ЗатвориИнтериор - Mazda 2 Hatchback (DE) 1.5 (DE5FS)ЗатвориДобавки - Mazda 2 Hatchback (DE) 1.5 (DE5FS)ЗатвориТунинг - Mazda 2 Hatchback (DE) 1.5 (DE5FS)ЗатвориАвтоаксесоари - Mazda 2 Hatchback (DE) 1.5 (DE5FS)ЗатвориЗадължително оборудване - Mazda 2 Hatchback (DE) 1.5 (DE5FS)ЗатвориИнструменти - Mazda 2 Hatchback (DE) 1.5 (DE5FS)ЗатвориТехнически характеристикиОбщи данниОбщи сведения основни стойностиВид на управлението на двигателяАнгренажна веригаОбороти при макс. мощност6000 1/minОбороти при макс. въртящ момент4000 1/minМаксимален въртящ момент137 NmХод78,40 ммВътрешен диаметър на цилиндъра78,00 ммВентили за един цилиндър4Луфт на вентила - всмукателен клапанДвигател студен0,27 - 0,33 ммЛуфт на вентила - изпускателен клапанДвигател студен0,27 - 0,33 ммЪгъл на гнездото на вентила - всмукателен клапан45°Ъгъл на гнездото на вентила - изпускателен клапан45°Количество на нужните запалителни свещи/нагревателни свещи4Последователност на запалване1-3-4-2Налягане при сгъстяване15,20 barРазлика макс. 2 barНалягане при сгъстяванеАлтернативна възможност:10,60 barМинимално налягане при обороти на стартераСтепен на сгъстяване10,00 :1Максимално забавяне глава на цилиндъра0,100 ммОхладителна системаТермостатът отваря при температура80° - 84°Запалителна системаЗапалителна система стойностиМомент на запалване-10°00' - преди ГМТ + след ГМТРазстояние между електродите1,30±0,10 ммСистема за горивоСистема за гориво общи сведенияНалягане на системата3,75 - 4,50 barКонтролни стойности за изгорелите газовеОбщи стойности, съществени за изгорелите газовеПоложение щепсел за диагнозаСтойности за изгорелите газове бензинМомент на запалване-10°00' - преди ГМТ + след ГМТДанни за ходовата частДжанти и гумиНалягане при пълнене на гумите отпредЧастично натоварен2,20 barНалягане при пълнене на гумите отпредизцяло натоварена2,40 barНалягане при пълнене на гумите отзадЧастично натоварен2,00 barНалягане при пълнене на гумите отзадизцяло натоварена2,80 barХодова част размериБаза2490 ммКоловоз предни колела175/65 R 141475 ммКоловоз предни колела185/55 R 151475 ммКоловоз предни колела195/45 R 161465 ммКоловоз задни колела175/65 R 141465 ммКоловоз задни колела185/55 R 151465 ммКоловоз задни колела195/45 R 161455 ммСпирачна уредбаИзмерения на спирачкатаДебелина на спирачния диск преден мост23,00 ммДебелина на спирачния диск граница на износване преден мостсъс скоростна кутия21,00 ммДебелина на спирачния диск граница на износване преден мостс CVT скоростна кутия18,00 ммДебелина на спирачния диск граница на износване преден мостс автоматична скоростна кутия21,00 ммМаксимално странично биене на спирачния диск преден мост0,04 ммДиаметър на спирачния барабан заден мост200,00 ммДиаметър на спирачния барабан граница на износване заден мостс автоматична скоростна кутия201,50 ммДиаметър на спирачния барабан граница на износване заден мостсъс скоростна кутия201,50 ммДиаметър на спирачния барабан граница на износване заден мостс CVT скоростна кутия181,50 ммДебелина на спирачната накладка преден мостбез задна пластина11,00 ммДебелина на спирачната накладка заден мостбез задна пластина4,10 ммДебелина на спирачната накладка граница на износване преден мостбез задна пластина2,00 ммДебелина на спирачната накладка граница на износване заден мостбез задна пластина1,00 ммСпирачен диск диаметър преден мост258,00 ммЕлектроникаИзмервани стойности от датчиците и изпълнителните елементиСъпротивление - температурен датчик за двигателя при 20°2450±250 OhmСъпротивление - температурен датчик за двигателя при 80°318±32 OhmЛуфт на датчика на коляновия вал в mm1,00±0,50 ммСъпротивление - впръскващи клапани12,00 Ohmпри 20°CОбщи сведения за електрическата частНапрежение на акумулатора12 волтаКонсумативиКоличество запълващи вещества и спецификацииДвигателно масло с филтър3,90 литраВискозност моторно маслоACEA A3/B30W-40, 5W-30, 5W-40, 10W-40, 10W-60, 15W-40Вискозност моторно маслоACEA A5/B5SAE 0W-20|SAE 0W-30|SAE 5W-30Спецификация двигателно маслоACEA A3/B3|ACEA A5/B5SAE 5W - 20|SAE 5W - 30|SAE 10W-40Масло за скоростната кутияСкоростна кутия F35M-R3,04 литраСпецификация масло за скоростна кутияСкоростна кутия F35M-RAPI GL4 SAE 75W-90|API GL5 SAE 75W-90Масло за автоматична скоростна кутия7,00 литраСпецификация масло за автоматична скоростна кутияATF M-VАнтифризсъс скоростна кутия5,20 литраАнтифризс автоматична скоростна кутия5,00 литраСпецификация охладителна течностОригинален антифризСпирачна течност при смяна1,25 литраСпецификация спирачна течностDOT 3|DOT 4Спецификация на течности за съединителяDOT 3|DOT 4Средства за охлаждане климатична инсталация470 - 500 грамаСпецификация охлаждащи средстваR134aМасло климатична инсталация110 cm³Спецификация охлаждащо маслоATMOS GU10Обем на резервоара за гориво43 литраОсветлениеПредни фаровеСветлини за дневно каранеПринадлежащи артикулиDAY1Задни фаровеДопълнителни стоповеLEDОригинален детайлВътрешни лампиИнтервали за смянаЗа сервизни данниАгрегатен ремък - интервал за проверкана всеки 20.000 km / веднъж годишноВъздушен филтър интервал за смянана всеки 60.000 km / 3 годиниВъздушен филтър интервал за почистванена всеки 20.000 km / веднъж годишноЗапалителни свещи интервал за смянавсички 120.000 kmСпирачна течност интервал за смянана всеки 40.000 km / 2 годиниОхлаждащи средства за двигателя интервал за смянаОхладителна течност Longlife FL 22на всеки 200.000 km / 11 годиниОхлаждащи средства за двигателя интервал за смянапърво на 100.000 km / 4 години, след това всяка 2 годинаМасло на предавателна кутия - контролен режимна всеки 20.000 km / веднъж годишноМоторно масло и филтър интервал за смянана всеки 20.000 km / веднъж годишноПроверете каросерията и дъното на купетоведнъж годишноФилтър купе интервал за смянана всеки 40.000 km / 2 годиниИзбраното МПС е успешно добавено във вашия гараж. +
-
Огромен избор Над 800 000 авточасти
-
Купи на кредит с ТБИ Минимална сума 150 лв.
-
Експресна доставка Наложен платеж и преглед
-
14 дни срок Връщане или замяна