ARP болтове и шпилки Mazda за Mazda 626 Hatchback (GD) 1.8 (GD8P) - 88 коня бензин F8 (12V) - онлайн магазин
.jpg)
88 к.с - бензин
11.1987 - 05.1992
-
ARP 2000 5/16" connecting rod screws in 38.1mm length.
Universally applicable for all H-shank connecting rods.
ARP connecting rod bolts have been developed for the highest requirements and offer optimum safety.
The connecting rod bolts are heat treated and rolled, which gives them up to 10 times higher fatigue strength.
Especially for tuned engines highly recommended!
Connecting rod bearings best to replace directly with.A 3/8" nut should be used for installation.
More information on the correct tightening of the connecting rod bolts HERE
-
ARP 5/16 "rod bolts with 38,1mm in length.
Universally applicable for all H-Beam conrods .
ARP custom age 625 + have been developed for the highest requirements and provide optimum safety.
At high engine speed, it arrives at the Aufwertsbewegung the piston to high tensile forces acting on the connecting rod according to Kurbelwellenhub more or less.
To avoid this, a screw is recommended Pleulschraube tear as it has a tensile strength of 260-280 PSI, compared to having only a 2000 ARP Zugfestigkit of 220 PSI
The rod bolts are heat treated and rolled, giving them up to 10 times higher fatigue strength.
Especially for tuned engines highly recommended!
Best exchange directly connecting rod bearings.
(Price for one Bolt.)More information on how to properly tighten the connecting rod bolts
-
Digital High End Dial Indicator from ARP for measuring the extension of expansion screws.
When fitting connecting rod bolts, the tightening torque is only of secondary importance. Much more important is the extension of the screw.
This stretch can be measured accurately with the ARP dial gauge.
ARP has taken accuracy to the next level with the introduction of a digital stretch gauge that measures to the ten-thousandth (0.0001-inch).
Accurate readings are made by opposing ball and pin probes centered on the bolt. A uniquely designed aluminum handle facilitates operation.
ALWAYS fit and tighten connecting rod bolts with sufficient ARP Ultra Torque Paste!
For further information about assambling rod bolts correctly, click here
Here is our video on the correct installation of connecting rods and connecting rod bolts:
ARP strech gauge for a perfect conrod bolts assembly. If you want to torque your conrod bolts in a professional way you have to measure the strech and not the torque. This ARP gauge is individually adjustable to measure each kind of conrod bolts. Always use ARP ultra torque grease for conrod assembly.
Here is our video on the correct installation of connecting rods and connecting rod bolts:
"Spezial ARP ultra torque assembly lubricant for professional fittment of each kind of ARP bolts or studs.
All ARP bolts and studs threads should be thigthen up with this ARP Moly Assembly Lubricant called ultra torque to mentain correct torques specifications.
All ARP kit have this lubricant included.
"
"Spezial ARP ultra torque assembly lubricant for professional fittment of each kind of ARP bolts or studs.
All ARP bolts and studs threads should be thigthen up with this ARP Moly Assembly Lubricant called ultra torque to mentain correct torques specifications.
Big can (approx. 350 gramms) with brush included.
"
M10 x 1.25 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M10 x 1.25 x 20 20 mm n.a. M10 x 1.25 x 25 25 mm n.a. M10 x 1.25 x 30 30 mm n.a. M10 x 1.25 x 35 35 mm n.a. M10 x 1.25 x 40 26 mm 14 mm M10 x 1.25 x 45 26 mm 19 mm M10 x 1.25 x 50 26 mm 24 mm M10 x 1.25 x 60 26 mm 34 mm M10 x 1.25 x 70 26 mm 44 mm M10 x 1.25 x 80 26 mm 54 mm M10 x 1.25 x 90 26 mm 64 mm M10 x 1.25 x 100 26 mm 74 mm
M10 x 1.50 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M10 x 1.50 x 20 20 mm n.a. M10 x 1.50 x 25 25 mm n.a. M10 x 1.50 x 30 30 mm n.a. M10 x 1.50 x 35 35 mm n.a. M10 x 1.50 x 40 26 mm 14 mm M10 x 1.50 x 45 26 mm 19 mm M10 x 1.50 x 50 26 mm 24 mm M10 x 1.50 x 60 26 mm 34 mm M10 x 1.50 x 65 26 mm 39 mm M10 x 1.50 x 70 26 mm 44 mm M10 x 1.50 x 80 26 mm 54 mm M10 x 1.50 x 90 26 mm 64 mm M10 x 1.50 x 100 26 mm 74 mm
M12 x 1.50 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M12 x 1.50 x 25 25 mm n.a. M12 x 1.50 x 30 30 mm n.a. M12 x 1.50 x 35 30 mm 5 mm M12 x 1.50 x 40 30 mm 10 mm M12 x 1.50 x 45 30 mm 15 mm M12 x 1.50 x 50 30 mm 20 mm M12 x 1.50 x 60 30 mm 30 mm M12 x 1.50 x 70 30 mm 40 mm M12 x 1.50 x 80 30 mm 50 mm M12 x 1.50 x 90 30 mm 60 mm M12 x 1.50 x 100 30 mm 70 mm
M12 x 1.75 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M12 x 1.75 x 25 25 mm n.a. M12 x 1.75 x 30 30 mm n.a. M12 x 1.75 x 35 30 mm 5 mm M12 x 1.75 x 40 30 mm 10 mm M12 x 1.75 x 45 30 mm 15 mm M12 x 1.75 x 50 30 mm 20 mm M12 x 1.75 x 60 30 mm 30 mm M12 x 1.75 x 70 30 mm 40 mm M12 x 1.75 x 80 30 mm 50 mm M12 x 1.75 x 90 30 mm 60 mm M12 x 1.75 x 100 30 mm 70 mm
M6 x 1.00 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M6 x 1.00 x 12 12 mm n.a. M6 x 1.00 x 16 16 mm n.a. M6 x 1.00 x 20 20 mm n.a. M6 x 1.00 x 25 25 mm n.a. M6 x 1.00 x 30 18 mm 12 mm M6 x 1.00 x 35 18 mm 17 mm M6 x 1.00 x 40 18 mm 22 mm M6 x 1.00 x 45 18 mm 27 mm M6 x 1.00 x 50 18 mm 32 mm M6 x 1.00 x 55 18 mm 37 mm M6 x 1.00 x 60 18 mm 42 mm M6 x 1.00 x 65 18 mm 47 mm M6 x 1.00 x 70 18 mm 52 mm M6 x 1.00 x 75 18 mm 57 mm M6 x 1.00 x 80 18 mm 62 mm M6 x 1.00 x 90 18 mm 72 mm M6 x 1.00 x 100 18 mm 82 mm M6 x 1.00 x 135 18 mm 117 mm
M8 x 1.25 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M8 x 1.25 x 12 12 mm n.a. M8 x 1.25 x 16 16 mm n.a. M8 x 1.25 x 20 20 mm n.a. M8 x 1.25 x 25 25 mm n.a. M8 x 1.25 x 30 22 mm 8 mm M8 x 1.25 x 35 22 mm 13 mm M8 x 1.25 x 40 22 mm 18 mm M8 x 1.25 x 45 22 mm 23 mm M8 x 1.25 x 50 22 mm 28 mm M8 x 1.25 x 55 22 mm 33 mm M8 x 1.25 x 60 22 mm 38 mm M8 x 1.25 x 65 22 mm 43 mm M8 x 1.25 x 70 22 mm 48 mm M8 x 1.25 x 75 22 mm 53 mm M8 x 1.25 x 80 22 mm 58 mm M8 x 1.25 x 85 22 mm 63 mm M8 x 1.25 x 90 22 mm 68 mm M8 x 1.25 x 100 22 mm 78 mm
ARP Main Stud Kit for MAZDA 1.6L (B6) & 1.8L (BP) DOHC Miata (12pt nuts) Acura.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for MAZDA 2.3L DOHC 16V.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Main Stud Kit MAZDA'03 2.3L DOHC 16V (2003 & later).
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Conrod bolt kit for Mazda Miata '88-'05.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
ARP Head Stud Kit for MAZDA Miata.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Flywheel bolt kit for Opel/Vauxhall 2.0L 16V.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.- Perfectly crafted rolled threads from indestructible material.
- These bolts are ideal for tuned engines and are highly recommended by higher tourqe.
- Set of 8 pcs of high-strenght bolts
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
Single nut for all ARP studs. Should you ever lose one, no problem.
- 100% reusable
- Stainless
- Extremely temperature resistant
Price for a nut with a washer
Single nut in our high boost version for almost all stud bolt from ARP. Should you ever lose or damage one, no problem.
- 100% reusable
- stainless
- extremely temperature resistant
Price for one nut.
Spezial tool to fit ARP studs in the Cylinder head.
Some kits from ARP may include this tool, but we just sell it always seperately. This makes the kits much more cheaper in the end.
This tool is needed for the 1.8T engine.
Internal multi-tooth socket for mounting ARP nuts and bolts.
12 square socket with 1/2 inch drive for tightening ARP nuts. This ARP tool is available in different sizes and is needed for the assembly of all ARP stud bolt and screws.
Available in the following sizes: 8-20mm
Спирачна системаСпирачна система - Mazda 626 Hatchback (GD) 1.8 (GD8P)ЗатвориОкачване на колелатаОкачване на колелата - Mazda 626 Hatchback (GD) 1.8 (GD8P)ЗатвориКормилна системаКормилна система - Mazda 626 Hatchback (GD) 1.8 (GD8P)ЗатвориЗадвижване на колелатаЗадвижване на колелата - Mazda 626 Hatchback (GD) 1.8 (GD8P)ЗатвориТрансмисияТрансмисия - Mazda 626 Hatchback (GD) 1.8 (GD8P)ЗатвориРемъчно задвижванеРемъчно задвижване - Mazda 626 Hatchback (GD) 1.8 (GD8P)ЗатвориЧасти за двигателЧасти за двигател - Mazda 626 Hatchback (GD) 1.8 (GD8P)ЗатвориЧасти за цилиндров блокЧасти за цилиндров блок - Mazda 626 Hatchback (GD) 1.8 (GD8P)ЗатвориГарнитуриГарнитури - Mazda 626 Hatchback (GD) 1.8 (GD8P)ЗатвориОхладителна системаОхладителна система - Mazda 626 Hatchback (GD) 1.8 (GD8P)ЗатвориКлиматична системаКлиматична система - Mazda 626 Hatchback (GD) 1.8 (GD8P)ЗатвориОтопление и вентилацияФилтриФилтри - Mazda 626 Hatchback (GD) 1.8 (GD8P)ЗатвориМасла и течностиМасла и течности - Mazda 626 Hatchback (GD) 1.8 (GD8P)ЗатвориЗапалителна системаЗапалителна система - Mazda 626 Hatchback (GD) 1.8 (GD8P)ЗатвориДатчици и сензориДатчици и сензори - Mazda 626 Hatchback (GD) 1.8 (GD8P)ЗатвориГоривна системаГоривна система - Mazda 626 Hatchback (GD) 1.8 (GD8P)ЗатвориЕлектрическа системаЕлектрическа система - Mazda 626 Hatchback (GD) 1.8 (GD8P)ЗатвориСтартова системаСтартова система - Mazda 626 Hatchback (GD) 1.8 (GD8P)ЗатвориПочистване на стъклатаПочистване на стъклата - Mazda 626 Hatchback (GD) 1.8 (GD8P)ЗатвориАуспуси и гърнетаАуспуси и гърнета - Mazda 626 Hatchback (GD) 1.8 (GD8P)ЗатвориЕдрогабаритни частиЕдрогабаритни части - Mazda 626 Hatchback (GD) 1.8 (GD8P)ЗатвориСветлиниСветлини - Mazda 626 Hatchback (GD) 1.8 (GD8P)ЗатвориИнтериорИнтериор - Mazda 626 Hatchback (GD) 1.8 (GD8P)ЗатвориДобавкиДобавки - Mazda 626 Hatchback (GD) 1.8 (GD8P)ЗатвориТунингТунинг - Mazda 626 Hatchback (GD) 1.8 (GD8P)ЗатвориАвтоаксесоариАвтоаксесоари - Mazda 626 Hatchback (GD) 1.8 (GD8P)ЗатвориЗадължително оборудванеЗадължително оборудване - Mazda 626 Hatchback (GD) 1.8 (GD8P)ЗатвориИнструментиИнструменти - Mazda 626 Hatchback (GD) 1.8 (GD8P)ЗатвориТехнически характеристики
Общи данни
Запалителна система
Система за гориво
Контролни стойности за изгорелите газове
Спирачна уредба
Консумативи
Осветление
Интервали за смянаОбщи данниОбщи сведения основни стойностиВид на управлението на двигателяАнгренажен ремъкХод77,00 ммВътрешен диаметър на цилиндъра86,00 ммВентили за един цилиндър2Компенсация на луфта на вентилаХидроповдигачВсмукателен клапан отваря/ затваря в градуси от ъгъла на ръчката14°-/56°+ - преди горна мъртва точка (ГМТ) + след ГМТ/- преди долна мъртва точка (ДМТ)+ след ДМТИзпускателен клапан отваря/ затваря в градуси от ъгъла на ръчката69°-/13°+ - преди ДМТ+ след ДМТ/- преди ГМТ+ след ГМТЪгъл на гнездото на вентила - всмукателен клапан45°Ъгъл на гнездото на вентила - изпускателен клапан45°Диаметър на стъблото на вентила - всмукателен клапан6,970 - 6,985 ммКоличество на нужните запалителни свещи/нагревателни свещи4Последователност на запалване1-3-4-2Налягане при сгъстяване9,0 - 13,0 barСтепен на сгъстяване8,60 :1Запалителна системаЗапалителна система стойностиМомент на запалване-6°00'±1°00' - преди ГМТ + след ГМТСистема за горивоСистема за гориво общи сведенияОбработка на сместа обозначениеКарбураторКонтролни стойности за изгорелите газовеОбщи стойности, съществени за изгорелите газовеОбороти на празен ход при скоростната кутия800 - 850 1/minОбороти на празен ход при автоматична скоростна кутия900 - 950 1/minМинимална температура на моторното масло при AU60 °CСтойности за изгорелите газове бензинВакуумен маркуч за регулиране на центробежната сила леко нагоре/надолуот и нагореМомент на запалване-6°00'±1°00' - преди ГМТ + след ГМТСпирачна уредбаИзмерения на спирачкатаДебелина на спирачния диск преден мостс 13 цола джанта20,00 ммДебелина на спирачния диск преден мостс 14 цола джанта24,00 ммДебелина на спирачния диск граница на износване преден мостс 13 цола джанта18,00 ммДебелина на спирачния диск граница на износване преден мостс 14 цола джанта22,00 ммДебелина на спирачния диск заден мост10,00 ммДебелина на спирачния диск граница на износване заден мост8,00 ммДиаметър на спирачния барабан заден мостс 13 цола джанта200,00 ммДиаметър на спирачния барабан заден мостс 14 цола джанта228,60 ммДиаметър на спирачния барабан граница на износване заден мостс 13 цола джанта201,50 ммДиаметър на спирачния барабан граница на износване заден мостс 14 цола джанта231,00 ммКонсумативиКоличество запълващи вещества и спецификацииДвигателно масло с филтър3,90 литраВискозност моторно маслоACEA A2/B210W-30, 10W-40, 15W-40Спецификация двигателно маслоACEA A2/B2Масло за скоростната кутия3,35 литраСпецификация масло за скоростна кутияAPI GL4 SAE 75W-90|API GL5 SAE 75W-90Масло за автоматична скоростна кутия6,20 литраСпецификация масло за автоматична скоростна кутияATF Dexron II DМасло за сервоуправлението1,00 литраМасло за сервоуправлениетос управление на всички колела2,00 литраСпецификация масло за сервоуправлениетоATF Dexron II DАнтифриз7,50 литраСпецификация охладителна течностСредства за защита от замръзване на основата на етиленгликолСпирачна течност при смяна1,00 литраСпецификация спирачна течностDOT 4Средства за охлаждане климатична инсталация800 грамаСпецификация охлаждащи средстваR134aОбем на резервоара за гориво60 литраОсветлениеПредни фаровеКъси светлиниH4 12V 60/55W P43t
Дълги светлиниH4 12V 60/55W P43tСветлини за дневно каранеПринадлежащи артикулиDAY1Допълнителни фаровеH1 12V 55W P14,5sГабаритиR5W 12V 5W BA15sМигач преденP21W 12V 21W BA15sМигач страниченW5W 12V 5W W2,1x9,5dЗадни фаровеМигач заденP21W 12V 21W BA15sЗадна светлинаP21/5W 12V 21/5W BAY15dСтопP21/5W 12V 21/5W BAY15dСветлини за обратен ходP21W 12V 21W BA15sЗадни фарове за мъглаP21W 12V 21W BA15sОсветление на табелата с регистрационния номерW5W 12V 5W W2,1x9,5dВътрешни лампиВътрешно осветлениеC10W 12V 10W SV8,5-8Лампа в багажникаC5W 12V 5W SV8,5 (11x35)Интервали за смянаЗа сервизни данниУправление на двигателя със зъбчат ремък променлив интервалвсички 100.000 kmУправление на двигателя със зъбчат ремък режим на контролне е предписано от производителяИзбраното МПС е успешно добавено във вашия гараж. +
![ARP Custom Age 625+ 5/16" Connection Bolts with 1.5" lenghts ARP arp3006708 Mazda 626 Hatchback (GD) 1.8 (GD8P)](images/arp-custom-age-625+-5/16"-connection-bolts-with-1.5"-lenghts-imageaplist-5243-3861780.jpg)
-
Огромен избор Над 800 000 авточасти
-
Купи на кредит с ТБИ Минимална сума 150 лв.
-
Експресна доставка Наложен платеж и преглед
-
14 дни срок Връщане или замяна
ТОП производители
