ARP болтове и шпилки Mitsubishi за Mitsubishi L200 (KB,KA T) 2.5 DI-D 4WD (KB4T) - 178 коня дизел 4D56-HP - онлайн магазин
178 к.с - дизел
04.2010 - 12.2015
-
ARP 2000 5/16" connecting rod screws in 38.1mm length.
Universally applicable for all H-shank connecting rods.
ARP connecting rod bolts have been developed for the highest requirements and offer optimum safety.
The connecting rod bolts are heat treated and rolled, which gives them up to 10 times higher fatigue strength.
Especially for tuned engines highly recommended!
Connecting rod bearings best to replace directly with.A 3/8" nut should be used for installation.
More information on the correct tightening of the connecting rod bolts HERE
-
ARP 5/16 "rod bolts with 38,1mm in length.
Universally applicable for all H-Beam conrods .
ARP custom age 625 + have been developed for the highest requirements and provide optimum safety.
At high engine speed, it arrives at the Aufwertsbewegung the piston to high tensile forces acting on the connecting rod according to Kurbelwellenhub more or less.
To avoid this, a screw is recommended Pleulschraube tear as it has a tensile strength of 260-280 PSI, compared to having only a 2000 ARP Zugfestigkit of 220 PSI
The rod bolts are heat treated and rolled, giving them up to 10 times higher fatigue strength.
Especially for tuned engines highly recommended!
Best exchange directly connecting rod bearings.
(Price for one Bolt.)More information on how to properly tighten the connecting rod bolts
-
ARP 625+ custom age headstud KIT for Mitsubishi 4G63 engines M11
ARP custom age 625+ have been developed for the highest requirements and provide optimum safety.
The Studs are heat treated and rolled, giving them up to 10 times higher fatigue strength compared to normal ARP bolts!
(Price for a complete Set) -
Digital High End Dial Indicator from ARP for measuring the extension of expansion screws.
When fitting connecting rod bolts, the tightening torque is only of secondary importance. Much more important is the extension of the screw.
This stretch can be measured accurately with the ARP dial gauge.
ARP has taken accuracy to the next level with the introduction of a digital stretch gauge that measures to the ten-thousandth (0.0001-inch).
Accurate readings are made by opposing ball and pin probes centered on the bolt. A uniquely designed aluminum handle facilitates operation.
ALWAYS fit and tighten connecting rod bolts with sufficient ARP Ultra Torque Paste!
For further information about assambling rod bolts correctly, click here
Here is our video on the correct installation of connecting rods and connecting rod bolts:
ARP strech gauge for a perfect conrod bolts assembly. If you want to torque your conrod bolts in a professional way you have to measure the strech and not the torque. This ARP gauge is individually adjustable to measure each kind of conrod bolts. Always use ARP ultra torque grease for conrod assembly.
Here is our video on the correct installation of connecting rods and connecting rod bolts:
"Spezial ARP ultra torque assembly lubricant for professional fittment of each kind of ARP bolts or studs.
All ARP bolts and studs threads should be thigthen up with this ARP Moly Assembly Lubricant called ultra torque to mentain correct torques specifications.
All ARP kit have this lubricant included.
""Spezial ARP ultra torque assembly lubricant for professional fittment of each kind of ARP bolts or studs.
All ARP bolts and studs threads should be thigthen up with this ARP Moly Assembly Lubricant called ultra torque to mentain correct torques specifications.
Big can (approx. 350 gramms) with brush included.
"M10 x 1.25 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M10 x 1.25 x 20 20 mm n.a. M10 x 1.25 x 25 25 mm n.a. M10 x 1.25 x 30 30 mm n.a. M10 x 1.25 x 35 35 mm n.a. M10 x 1.25 x 40 26 mm 14 mm M10 x 1.25 x 45 26 mm 19 mm M10 x 1.25 x 50 26 mm 24 mm M10 x 1.25 x 60 26 mm 34 mm M10 x 1.25 x 70 26 mm 44 mm M10 x 1.25 x 80 26 mm 54 mm M10 x 1.25 x 90 26 mm 64 mm M10 x 1.25 x 100 26 mm 74 mm M10 x 1.50 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M10 x 1.50 x 20 20 mm n.a. M10 x 1.50 x 25 25 mm n.a. M10 x 1.50 x 30 30 mm n.a. M10 x 1.50 x 35 35 mm n.a. M10 x 1.50 x 40 26 mm 14 mm M10 x 1.50 x 45 26 mm 19 mm M10 x 1.50 x 50 26 mm 24 mm M10 x 1.50 x 60 26 mm 34 mm M10 x 1.50 x 65 26 mm 39 mm M10 x 1.50 x 70 26 mm 44 mm M10 x 1.50 x 80 26 mm 54 mm M10 x 1.50 x 90 26 mm 64 mm M10 x 1.50 x 100 26 mm 74 mm M12 x 1.50 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M12 x 1.50 x 25 25 mm n.a. M12 x 1.50 x 30 30 mm n.a. M12 x 1.50 x 35 30 mm 5 mm M12 x 1.50 x 40 30 mm 10 mm M12 x 1.50 x 45 30 mm 15 mm M12 x 1.50 x 50 30 mm 20 mm M12 x 1.50 x 60 30 mm 30 mm M12 x 1.50 x 70 30 mm 40 mm M12 x 1.50 x 80 30 mm 50 mm M12 x 1.50 x 90 30 mm 60 mm M12 x 1.50 x 100 30 mm 70 mm M12 x 1.75 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M12 x 1.75 x 25 25 mm n.a. M12 x 1.75 x 30 30 mm n.a. M12 x 1.75 x 35 30 mm 5 mm M12 x 1.75 x 40 30 mm 10 mm M12 x 1.75 x 45 30 mm 15 mm M12 x 1.75 x 50 30 mm 20 mm M12 x 1.75 x 60 30 mm 30 mm M12 x 1.75 x 70 30 mm 40 mm M12 x 1.75 x 80 30 mm 50 mm M12 x 1.75 x 90 30 mm 60 mm M12 x 1.75 x 100 30 mm 70 mm M6 x 1.00 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M6 x 1.00 x 12 12 mm n.a. M6 x 1.00 x 16 16 mm n.a. M6 x 1.00 x 20 20 mm n.a. M6 x 1.00 x 25 25 mm n.a. M6 x 1.00 x 30 18 mm 12 mm M6 x 1.00 x 35 18 mm 17 mm M6 x 1.00 x 40 18 mm 22 mm M6 x 1.00 x 45 18 mm 27 mm M6 x 1.00 x 50 18 mm 32 mm M6 x 1.00 x 55 18 mm 37 mm M6 x 1.00 x 60 18 mm 42 mm M6 x 1.00 x 65 18 mm 47 mm M6 x 1.00 x 70 18 mm 52 mm M6 x 1.00 x 75 18 mm 57 mm M6 x 1.00 x 80 18 mm 62 mm M6 x 1.00 x 90 18 mm 72 mm M6 x 1.00 x 100 18 mm 82 mm M6 x 1.00 x 135 18 mm 117 mm M8 x 1.25 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M8 x 1.25 x 12 12 mm n.a. M8 x 1.25 x 16 16 mm n.a. M8 x 1.25 x 20 20 mm n.a. M8 x 1.25 x 25 25 mm n.a. M8 x 1.25 x 30 22 mm 8 mm M8 x 1.25 x 35 22 mm 13 mm M8 x 1.25 x 40 22 mm 18 mm M8 x 1.25 x 45 22 mm 23 mm M8 x 1.25 x 50 22 mm 28 mm M8 x 1.25 x 55 22 mm 33 mm M8 x 1.25 x 60 22 mm 38 mm M8 x 1.25 x 65 22 mm 43 mm M8 x 1.25 x 70 22 mm 48 mm M8 x 1.25 x 75 22 mm 53 mm M8 x 1.25 x 80 22 mm 58 mm M8 x 1.25 x 85 22 mm 63 mm M8 x 1.25 x 90 22 mm 68 mm M8 x 1.25 x 100 22 mm 78 mm ARP Conrod bolt kit for Mitsubishi 2.0L (4B11) DOHC (2008 & later) M8.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
(Click on the PDF box to download instruction)ARP Turbo Head Stud Kit for MITSUBISHI 2.0L 4B11 DOHC (2008 & später).
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for MITSUBISHI 2.0L 4G63 DOHC (1994-07) M11.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP conrod bolt set for Mitsubishi 2.0L (4G63) DOHC (1994-2007) M8.
Forged from high strength chrome moly steel with 200,000 psi tensile strength nearly twice as strong as the best factory OEM stock bolts.
- Perfectly rolled threads are virtually indestructible with the material used.
- These bolts are especially recommended for tuned engines.
ARP - world leader in the field of engine bolts produces top quality products of unparalleled quality, unsurpassed strength and forged to the nanometer.ARP Head Stud Kit for MITSUBISHI 2.0L 4G63 DOHC M11.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for MITSUBISHI 2.0L 4G63 M12.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Conrod bolt kit for Mitsubishi 2.0L (4G63) DOHC (1993 & earlier) M9.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.ARP Head Stud Kit for MITSUBISHI 2.0L DOHC (1993 & earlier) M12 ARP 4 cyl. 16V.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Main Stud Kit für MITSUBISHI 2.0L (4B11) DOHC (2008 & later) turbo.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
-Due to advanced manufacturing processes ARP studs reach highest strength and stability.
-Tensile strength of 200.000 psi (13,8t/cm²).
-Absolutely perfectly round and straight studs for a first-class assembly.
-All kits come with ARP hardened washers and high quality nuts.
-Harder, more durable, stable, and processed better than any OEM products.
-10 times stronger threads than the competetive products by thread cut after curing.
-Highest ARP quality product for professional use.
-Fully reusable.
(Click on the PDF box to download instruction)ARP Main Stud Kit for MITSUBISHI 2.0L (4G63) DOHC (2007 & earlier), 4-cylinder 12pt.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Main Stud Kit for MITSUBISHI 2.6L (G54B) 2-bolt.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for MITSUBISHI 2.6L 12pt.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP conrod bolt set for Mitsubishi 2.6L.
Forged from high-strength chrome moly steel with 200,000 psi tensile strength nearly twice as strong as the best factory OEM stock bolts.
- Perfectly rolled threads are virtually indestructible with the material used.
- These bolts are especially recommended for tuned engines.
ARP - world leader in the field of engine bolts produces top quality products of unparalleled quality, unsurpassed strength and forged to the nanometer.
ARP Conrod bolt kit for Mitsubishi 3.0L & 3.5L V6.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
ARP Head Stud Kit for MITSUBISHI 3.0L 6G72 DOHC V6 ARP2000.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Main Stud Kit for MITSUBISHI 3.0L, 6G72 V6 (1993 & later).
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Flywheel bolt kit for Opel/Vauxhall 2.0L 16V.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.- Perfectly crafted rolled threads from indestructible material.
- These bolts are ideal for tuned engines and are highly recommended by higher tourqe.
- Set of 8 pcs of high-strenght bolts
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
Single nut for all ARP studs. Should you ever lose one, no problem.
- 100% reusable
- Stainless
- Extremely temperature resistant
Price for a nut with a washer
Single nut in our high boost version for almost all stud bolt from ARP. Should you ever lose or damage one, no problem.
- 100% reusable
- stainless
- extremely temperature resistant
Price for one nut.
Spezial tool to fit ARP studs in the Cylinder head.
Some kits from ARP may include this tool, but we just sell it always seperately. This makes the kits much more cheaper in the end.
This tool is needed for the 1.8T engine.Internal multi-tooth socket for mounting ARP nuts and bolts.
12 square socket with 1/2 inch drive for tightening ARP nuts. This ARP tool is available in different sizes and is needed for the assembly of all ARP stud bolt and screws.
Available in the following sizes: 8-20mm
Спирачна система - Mitsubishi L200 (KB,KA T) 2.5 DI-D 4WD (KB4T)ЗатвориОкачване на колелата - Mitsubishi L200 (KB,KA T) 2.5 DI-D 4WD (KB4T)ЗатвориКормилна система - Mitsubishi L200 (KB,KA T) 2.5 DI-D 4WD (KB4T)ЗатвориЗадвижване на колелата - Mitsubishi L200 (KB,KA T) 2.5 DI-D 4WD (KB4T)ЗатвориТрансмисия - Mitsubishi L200 (KB,KA T) 2.5 DI-D 4WD (KB4T)ЗатвориРемъчно задвижване - Mitsubishi L200 (KB,KA T) 2.5 DI-D 4WD (KB4T)ЗатвориЧасти за двигател - Mitsubishi L200 (KB,KA T) 2.5 DI-D 4WD (KB4T)ЗатвориЧасти за цилиндров блок - Mitsubishi L200 (KB,KA T) 2.5 DI-D 4WD (KB4T)ЗатвориГарнитури - Mitsubishi L200 (KB,KA T) 2.5 DI-D 4WD (KB4T)ЗатвориОхладителна система - Mitsubishi L200 (KB,KA T) 2.5 DI-D 4WD (KB4T)ЗатвориКлиматична система - Mitsubishi L200 (KB,KA T) 2.5 DI-D 4WD (KB4T)ЗатвориФилтри - Mitsubishi L200 (KB,KA T) 2.5 DI-D 4WD (KB4T)ЗатвориМасла и течности - Mitsubishi L200 (KB,KA T) 2.5 DI-D 4WD (KB4T)ЗатвориЗапалителна система - Mitsubishi L200 (KB,KA T) 2.5 DI-D 4WD (KB4T)ЗатвориДатчици и сензори - Mitsubishi L200 (KB,KA T) 2.5 DI-D 4WD (KB4T)ЗатвориГоривна система - Mitsubishi L200 (KB,KA T) 2.5 DI-D 4WD (KB4T)ЗатвориЕлектрическа система - Mitsubishi L200 (KB,KA T) 2.5 DI-D 4WD (KB4T)ЗатвориСтартова система - Mitsubishi L200 (KB,KA T) 2.5 DI-D 4WD (KB4T)ЗатвориПочистване на стъклата - Mitsubishi L200 (KB,KA T) 2.5 DI-D 4WD (KB4T)ЗатвориАуспуси и гърнета - Mitsubishi L200 (KB,KA T) 2.5 DI-D 4WD (KB4T)ЗатвориЕдрогабаритни части - Mitsubishi L200 (KB,KA T) 2.5 DI-D 4WD (KB4T)ЗатвориСветлини - Mitsubishi L200 (KB,KA T) 2.5 DI-D 4WD (KB4T)ЗатвориИнтериор - Mitsubishi L200 (KB,KA T) 2.5 DI-D 4WD (KB4T)ЗатвориДобавки - Mitsubishi L200 (KB,KA T) 2.5 DI-D 4WD (KB4T)ЗатвориТунинг - Mitsubishi L200 (KB,KA T) 2.5 DI-D 4WD (KB4T)ЗатвориАвтоаксесоари - Mitsubishi L200 (KB,KA T) 2.5 DI-D 4WD (KB4T)ЗатвориЗадължително оборудване - Mitsubishi L200 (KB,KA T) 2.5 DI-D 4WD (KB4T)ЗатвориИнструменти - Mitsubishi L200 (KB,KA T) 2.5 DI-D 4WD (KB4T)ЗатвориТехнически характеристикиОбщи данниОбщи сведения основни стойностиВид на управлението на двигателяАнгренажен ремъкОбороти при макс. мощност4000 1/minОбороти при макс. въртящ моментсъс скоростна кутия2000 1/minОбороти при макс. въртящ моментс автоматична скоростна кутия1800 1/minМаксимален въртящ моментсъс скоростна кутия400 NmМаксимален въртящ моментс автоматична скоростна кутия350 NmХод95,00 ммВътрешен диаметър на цилиндъра91,10 ммВентили за един цилиндър2Луфт на вентила - всмукателен клапанДвигател студен0,09 ммЛуфт на вентила - изпускателен клапанДвигател студен0,14 ммКоличество на нужните запалителни свещи/нагревателни свещи4Последователност на запалване1-3-4-2Степен на сгъстяване16,50 :1Система за горивоСистема за гориво общи сведенияВид на моторното горивоДизелОбработка на сместа обозначениеCommon RailКонтролни стойности за изгорелите газовеОбщи стойности, съществени за изгорелите газовеДанни за ходовата частДжанти и гумиНалягане при пълнене на гумите отпред0,00 barвиж стикера на B -колона от страната на водачаНалягане при пълнене на гумите отзад0,00 barвиж стикера на B -колона от страната на водачаКонсумативиКоличество запълващи вещества и спецификацииДвигателно масло с филтър7,40 литраВискозност моторно маслоACEA C45W-30Вискозност моторно маслоACEA C1SAE 5W-30Вискозност моторно маслоACEA C2SAE 0W-30|SAE 5W-30|SAE 0W-40|SAE 5W-40Вискозност моторно маслоACEA C3SAE 0W-30|SAE 5W-30|SAE 0W-40|SAE 5W-40Спецификация двигателно маслоACEA C1|ACEA C2|ACEA C3|ACEA C4Масло за скоростната кутиясъс задвижване на всички колела3,40 литраСпецификация масло за скоростна кутияAPI GL3 SAE 75W-85Масло за автоматична скоростна кутия9,70 литраСпецификация масло за автоматична скоростна кутияATF SP-IIIМасло на диференциала заден мост1,20 литраСпецификация масло за преден мостВариант 1API GL5 SAE 90Над 10°CСпецификация масло за преден мостВариант 2API GL5 SAE 80WПод 10°CДиференциално масло заден мост3,20 литраСпецификация масло за заден мостВариант 1API GL5 SAE 90Над 10°CСпецификация масло за заден мостВариант 2API GL5 SAE 80WПод 10°CМасло за разпределеителна скоростна кутия2,50 литраСпецификация разпределителна предавателна кутияAPI GL3 SAE 75W-85Масло за сервоуправлението1,00 литраСпецификация масло за сервоуправлениетоATF Dexron II|ATF Dexron IIIАнтифриз8,20 литраСпецификация охладителна течностDIA QUEEN SUPER LONG LIFE COOLANTСпирачна течност при смяна1,20 литраСпецификация спирачна течностDOT 3|DOT 4Спецификация на течности за съединителяDOT 3|DOT 4Средства за охлаждане климатична инсталация535 - 575 грамаМасло климатична инсталация120 - 140 cm³Спецификация охлаждащо маслоZXL 100PGОбем на резервоара за гориво75 литраОсветлениеПредни фаровеСветлини за дневно каранеПринадлежащи артикулиDAY1Блок фарове за мъглаПринадлежащи артикулиFOG1Задни фаровеИнтервали за смянаЗа сервизни данниУправление на двигателя със зъбчат ремък променлив интервалдо 2011на всеки 100.000 km / 5 годиниУправление на двигателя със зъбчат ремък променлив интервалот 2012 и нагорена всеки 90.000 km / 6 годиниВъздушен филтър интервал за смянаот 2012 и нагорена всеки 45.000 km / 3 годиниФилтър за гориво интервал за смянаот 2012 и нагорена всеки 30.000 km / 2 годиниФилтър за гориво интервал за смянадо 2011на всеки 40.000 km / 2 годиниОхлаждащи средства за двигателя интервал за смянаот 2012 и нагорена всеки 60.000 km / 4 годиниМасло за предавателна кутия интервал за смянадо 2011на всеки 100.000 km / 5 годиниМасло за предавателна кутия интервал за смянаот 2012 и нагорена всеки 105.000 km / 7 годиниМасло за автоматична скоростна кутия интервал за смянаот 2012 и нагорена всеки 90.000 km / 6 годиниМасло за автоматична скоростна кутия интервал за смянадо 2011на всеки 80.000 km / 4 годиниМасло за разпределителна кутия интервал за смянадо 2011на всеки 100.000 km / 5 годиниМасло за разпределителна кутия интервал за смянаот 2012 и нагорена всеки 105.000 km / 7 годиниТрансмисионно масло за преден мост интервал за смянаот 2012 и нагорена всеки 75.000 km / 5 годиниТрансмисионно масло за преден мост интервал за смянаот 2012 и нагоре, с блокиращ диференциална всеки 60.000 km / 4 годиниТрансмисионно масло за преден мост интервал за смянадо 2011на всеки 80.000 km / 4 годиниТрансмисионно масло за заден мост интервал за смянадо 2011на всеки 80.000 km / 4 годиниТрансмисионно масло за заден мост интервал за смянаот 2012 и нагорена всеки 75.000 km / 5 годиниТрансмисионно масло за заден мост интервал за смянаот 2012 и нагоре, с блокиращ диференциална всеки 60.000 km / 4 годиниМоторно масло и филтър интервал за смянадо 2011на всеки 20.000 km / веднъж годишноМоторно масло и филтър интервал за смянаот 2012 и нагорена всеки 15.000 / веднъж годишноПодновете батерията за дистанционно управлениедо 2011на всеки 20.000 km / веднъж годишноПодновете батерията за дистанционно управлениеот 2012 и нагорена всеки 15.000 km / веднъж годишноФилтър купе интервал за смянадо 2011на всеки 20.000 km / веднъж годишно(ако е наличен)Филтър купе интервал за смянаот 2012 и нагорена всеки 15.000 km / веднъж годишно(ако е наличен)Избраното МПС е успешно добавено във вашия гараж. +
-
Огромен избор Над 800 000 авточасти
-
Купи на кредит с ТБИ Минимална сума 150 лв.
-
Експресна доставка Наложен платеж и преглед
-
14 дни срок Връщане или замяна