ARP болтове и шпилки Mitsubishi за Mitsubishi Outlander (CU) 2.0 (CU2W) - 136 коня бензин 4G63 (DOHC 16V) - онлайн магазин
136 к.с - бензин
05.2003 - 10.2006
-
ARP 2000 5/16" connecting rod screws in 38.1mm length.
Universally applicable for all H-shank connecting rods.
ARP connecting rod bolts have been developed for the highest requirements and offer optimum safety.
The connecting rod bolts are heat treated and rolled, which gives them up to 10 times higher fatigue strength.
Especially for tuned engines highly recommended!
Connecting rod bearings best to replace directly with.A 3/8" nut should be used for installation.
More information on the correct tightening of the connecting rod bolts HERE
-
ARP 5/16 "rod bolts with 38,1mm in length.
Universally applicable for all H-Beam conrods .
ARP custom age 625 + have been developed for the highest requirements and provide optimum safety.
At high engine speed, it arrives at the Aufwertsbewegung the piston to high tensile forces acting on the connecting rod according to Kurbelwellenhub more or less.
To avoid this, a screw is recommended Pleulschraube tear as it has a tensile strength of 260-280 PSI, compared to having only a 2000 ARP Zugfestigkit of 220 PSI
The rod bolts are heat treated and rolled, giving them up to 10 times higher fatigue strength.
Especially for tuned engines highly recommended!
Best exchange directly connecting rod bearings.
(Price for one Bolt.)More information on how to properly tighten the connecting rod bolts
-
ARP 625+ custom age headstud KIT for Mitsubishi 4G63 engines M11
ARP custom age 625+ have been developed for the highest requirements and provide optimum safety.
The Studs are heat treated and rolled, giving them up to 10 times higher fatigue strength compared to normal ARP bolts!
(Price for a complete Set) -
Digital High End Dial Indicator from ARP for measuring the extension of expansion screws.
When fitting connecting rod bolts, the tightening torque is only of secondary importance. Much more important is the extension of the screw.
This stretch can be measured accurately with the ARP dial gauge.
ARP has taken accuracy to the next level with the introduction of a digital stretch gauge that measures to the ten-thousandth (0.0001-inch).
Accurate readings are made by opposing ball and pin probes centered on the bolt. A uniquely designed aluminum handle facilitates operation.
ALWAYS fit and tighten connecting rod bolts with sufficient ARP Ultra Torque Paste!
For further information about assambling rod bolts correctly, click here
Here is our video on the correct installation of connecting rods and connecting rod bolts:
ARP strech gauge for a perfect conrod bolts assembly. If you want to torque your conrod bolts in a professional way you have to measure the strech and not the torque. This ARP gauge is individually adjustable to measure each kind of conrod bolts. Always use ARP ultra torque grease for conrod assembly.
Here is our video on the correct installation of connecting rods and connecting rod bolts:
"Spezial ARP ultra torque assembly lubricant for professional fittment of each kind of ARP bolts or studs.
All ARP bolts and studs threads should be thigthen up with this ARP Moly Assembly Lubricant called ultra torque to mentain correct torques specifications.
All ARP kit have this lubricant included.
""Spezial ARP ultra torque assembly lubricant for professional fittment of each kind of ARP bolts or studs.
All ARP bolts and studs threads should be thigthen up with this ARP Moly Assembly Lubricant called ultra torque to mentain correct torques specifications.
Big can (approx. 350 gramms) with brush included.
"M10 x 1.25 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M10 x 1.25 x 20 20 mm n.a. M10 x 1.25 x 25 25 mm n.a. M10 x 1.25 x 30 30 mm n.a. M10 x 1.25 x 35 35 mm n.a. M10 x 1.25 x 40 26 mm 14 mm M10 x 1.25 x 45 26 mm 19 mm M10 x 1.25 x 50 26 mm 24 mm M10 x 1.25 x 60 26 mm 34 mm M10 x 1.25 x 70 26 mm 44 mm M10 x 1.25 x 80 26 mm 54 mm M10 x 1.25 x 90 26 mm 64 mm M10 x 1.25 x 100 26 mm 74 mm M10 x 1.50 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M10 x 1.50 x 20 20 mm n.a. M10 x 1.50 x 25 25 mm n.a. M10 x 1.50 x 30 30 mm n.a. M10 x 1.50 x 35 35 mm n.a. M10 x 1.50 x 40 26 mm 14 mm M10 x 1.50 x 45 26 mm 19 mm M10 x 1.50 x 50 26 mm 24 mm M10 x 1.50 x 60 26 mm 34 mm M10 x 1.50 x 65 26 mm 39 mm M10 x 1.50 x 70 26 mm 44 mm M10 x 1.50 x 80 26 mm 54 mm M10 x 1.50 x 90 26 mm 64 mm M10 x 1.50 x 100 26 mm 74 mm M12 x 1.50 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M12 x 1.50 x 25 25 mm n.a. M12 x 1.50 x 30 30 mm n.a. M12 x 1.50 x 35 30 mm 5 mm M12 x 1.50 x 40 30 mm 10 mm M12 x 1.50 x 45 30 mm 15 mm M12 x 1.50 x 50 30 mm 20 mm M12 x 1.50 x 60 30 mm 30 mm M12 x 1.50 x 70 30 mm 40 mm M12 x 1.50 x 80 30 mm 50 mm M12 x 1.50 x 90 30 mm 60 mm M12 x 1.50 x 100 30 mm 70 mm M12 x 1.75 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M12 x 1.75 x 25 25 mm n.a. M12 x 1.75 x 30 30 mm n.a. M12 x 1.75 x 35 30 mm 5 mm M12 x 1.75 x 40 30 mm 10 mm M12 x 1.75 x 45 30 mm 15 mm M12 x 1.75 x 50 30 mm 20 mm M12 x 1.75 x 60 30 mm 30 mm M12 x 1.75 x 70 30 mm 40 mm M12 x 1.75 x 80 30 mm 50 mm M12 x 1.75 x 90 30 mm 60 mm M12 x 1.75 x 100 30 mm 70 mm M6 x 1.00 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M6 x 1.00 x 12 12 mm n.a. M6 x 1.00 x 16 16 mm n.a. M6 x 1.00 x 20 20 mm n.a. M6 x 1.00 x 25 25 mm n.a. M6 x 1.00 x 30 18 mm 12 mm M6 x 1.00 x 35 18 mm 17 mm M6 x 1.00 x 40 18 mm 22 mm M6 x 1.00 x 45 18 mm 27 mm M6 x 1.00 x 50 18 mm 32 mm M6 x 1.00 x 55 18 mm 37 mm M6 x 1.00 x 60 18 mm 42 mm M6 x 1.00 x 65 18 mm 47 mm M6 x 1.00 x 70 18 mm 52 mm M6 x 1.00 x 75 18 mm 57 mm M6 x 1.00 x 80 18 mm 62 mm M6 x 1.00 x 90 18 mm 72 mm M6 x 1.00 x 100 18 mm 82 mm M6 x 1.00 x 135 18 mm 117 mm M8 x 1.25 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M8 x 1.25 x 12 12 mm n.a. M8 x 1.25 x 16 16 mm n.a. M8 x 1.25 x 20 20 mm n.a. M8 x 1.25 x 25 25 mm n.a. M8 x 1.25 x 30 22 mm 8 mm M8 x 1.25 x 35 22 mm 13 mm M8 x 1.25 x 40 22 mm 18 mm M8 x 1.25 x 45 22 mm 23 mm M8 x 1.25 x 50 22 mm 28 mm M8 x 1.25 x 55 22 mm 33 mm M8 x 1.25 x 60 22 mm 38 mm M8 x 1.25 x 65 22 mm 43 mm M8 x 1.25 x 70 22 mm 48 mm M8 x 1.25 x 75 22 mm 53 mm M8 x 1.25 x 80 22 mm 58 mm M8 x 1.25 x 85 22 mm 63 mm M8 x 1.25 x 90 22 mm 68 mm M8 x 1.25 x 100 22 mm 78 mm ARP Conrod bolt kit for Mitsubishi 2.0L (4B11) DOHC (2008 & later) M8.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
(Click on the PDF box to download instruction)ARP Turbo Head Stud Kit for MITSUBISHI 2.0L 4B11 DOHC (2008 & später).
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for MITSUBISHI 2.0L 4G63 DOHC (1994-07) M11.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP conrod bolt set for Mitsubishi 2.0L (4G63) DOHC (1994-2007) M8.
Forged from high strength chrome moly steel with 200,000 psi tensile strength nearly twice as strong as the best factory OEM stock bolts.
- Perfectly rolled threads are virtually indestructible with the material used.
- These bolts are especially recommended for tuned engines.
ARP - world leader in the field of engine bolts produces top quality products of unparalleled quality, unsurpassed strength and forged to the nanometer.ARP Head Stud Kit for MITSUBISHI 2.0L 4G63 DOHC M11.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for MITSUBISHI 2.0L 4G63 M12.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Conrod bolt kit for Mitsubishi 2.0L (4G63) DOHC (1993 & earlier) M9.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.ARP Head Stud Kit for MITSUBISHI 2.0L DOHC (1993 & earlier) M12 ARP 4 cyl. 16V.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Main Stud Kit für MITSUBISHI 2.0L (4B11) DOHC (2008 & later) turbo.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
-Due to advanced manufacturing processes ARP studs reach highest strength and stability.
-Tensile strength of 200.000 psi (13,8t/cm²).
-Absolutely perfectly round and straight studs for a first-class assembly.
-All kits come with ARP hardened washers and high quality nuts.
-Harder, more durable, stable, and processed better than any OEM products.
-10 times stronger threads than the competetive products by thread cut after curing.
-Highest ARP quality product for professional use.
-Fully reusable.
(Click on the PDF box to download instruction)ARP Main Stud Kit for MITSUBISHI 2.0L (4G63) DOHC (2007 & earlier), 4-cylinder 12pt.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Main Stud Kit for MITSUBISHI 2.6L (G54B) 2-bolt.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for MITSUBISHI 2.6L 12pt.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP conrod bolt set for Mitsubishi 2.6L.
Forged from high-strength chrome moly steel with 200,000 psi tensile strength nearly twice as strong as the best factory OEM stock bolts.
- Perfectly rolled threads are virtually indestructible with the material used.
- These bolts are especially recommended for tuned engines.
ARP - world leader in the field of engine bolts produces top quality products of unparalleled quality, unsurpassed strength and forged to the nanometer.
ARP Conrod bolt kit for Mitsubishi 3.0L & 3.5L V6.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
ARP Head Stud Kit for MITSUBISHI 3.0L 6G72 DOHC V6 ARP2000.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Main Stud Kit for MITSUBISHI 3.0L, 6G72 V6 (1993 & later).
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Flywheel bolt kit for Opel/Vauxhall 2.0L 16V.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.- Perfectly crafted rolled threads from indestructible material.
- These bolts are ideal for tuned engines and are highly recommended by higher tourqe.
- Set of 8 pcs of high-strenght bolts
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
Single nut for all ARP studs. Should you ever lose one, no problem.
- 100% reusable
- Stainless
- Extremely temperature resistant
Price for a nut with a washer
Single nut in our high boost version for almost all stud bolt from ARP. Should you ever lose or damage one, no problem.
- 100% reusable
- stainless
- extremely temperature resistant
Price for one nut.
Spezial tool to fit ARP studs in the Cylinder head.
Some kits from ARP may include this tool, but we just sell it always seperately. This makes the kits much more cheaper in the end.
This tool is needed for the 1.8T engine.Internal multi-tooth socket for mounting ARP nuts and bolts.
12 square socket with 1/2 inch drive for tightening ARP nuts. This ARP tool is available in different sizes and is needed for the assembly of all ARP stud bolt and screws.
Available in the following sizes: 8-20mm
Спирачна система - Mitsubishi Outlander (CU) 2.0 (CU2W)ЗатвориОкачване на колелата - Mitsubishi Outlander (CU) 2.0 (CU2W)ЗатвориКормилна система - Mitsubishi Outlander (CU) 2.0 (CU2W)ЗатвориЗадвижване на колелата - Mitsubishi Outlander (CU) 2.0 (CU2W)ЗатвориТрансмисия - Mitsubishi Outlander (CU) 2.0 (CU2W)ЗатвориРемъчно задвижване - Mitsubishi Outlander (CU) 2.0 (CU2W)ЗатвориЧасти за двигател - Mitsubishi Outlander (CU) 2.0 (CU2W)ЗатвориЧасти за цилиндров блок - Mitsubishi Outlander (CU) 2.0 (CU2W)ЗатвориГарнитури - Mitsubishi Outlander (CU) 2.0 (CU2W)ЗатвориОхладителна система - Mitsubishi Outlander (CU) 2.0 (CU2W)ЗатвориКлиматична система - Mitsubishi Outlander (CU) 2.0 (CU2W)ЗатвориОтопление и вентилация - Mitsubishi Outlander (CU) 2.0 (CU2W)ЗатвориФилтри - Mitsubishi Outlander (CU) 2.0 (CU2W)ЗатвориМасла и течности - Mitsubishi Outlander (CU) 2.0 (CU2W)ЗатвориЗапалителна система - Mitsubishi Outlander (CU) 2.0 (CU2W)ЗатвориДатчици и сензори - Mitsubishi Outlander (CU) 2.0 (CU2W)ЗатвориГоривна система - Mitsubishi Outlander (CU) 2.0 (CU2W)ЗатвориЕлектрическа система - Mitsubishi Outlander (CU) 2.0 (CU2W)ЗатвориСтартова система - Mitsubishi Outlander (CU) 2.0 (CU2W)ЗатвориПочистване на стъклата - Mitsubishi Outlander (CU) 2.0 (CU2W)ЗатвориАуспуси и гърнета - Mitsubishi Outlander (CU) 2.0 (CU2W)ЗатвориЕдрогабаритни части - Mitsubishi Outlander (CU) 2.0 (CU2W)ЗатвориСветлини - Mitsubishi Outlander (CU) 2.0 (CU2W)ЗатвориИнтериор - Mitsubishi Outlander (CU) 2.0 (CU2W)ЗатвориДобавки - Mitsubishi Outlander (CU) 2.0 (CU2W)ЗатвориТунинг - Mitsubishi Outlander (CU) 2.0 (CU2W)ЗатвориАвтоаксесоари - Mitsubishi Outlander (CU) 2.0 (CU2W)ЗатвориЗадължително оборудване - Mitsubishi Outlander (CU) 2.0 (CU2W)ЗатвориИнструменти - Mitsubishi Outlander (CU) 2.0 (CU2W)ЗатвориТехнически характеристикиОбщи данниОбщи сведения основни стойностиВид на управлението на двигателяАнгренажен ремъкОбороти при макс. мощност6000 1/minОбороти при макс. въртящ момент4500 1/minМаксимален въртящ момент176 NmХод88,00 ммВътрешен диаметър на цилиндъра85,00 ммВентили за един цилиндър4Компенсация на луфта на вентилаХидроповдигачВсмукателен клапан отваря/ затваря в градуси от ъгъла на ръчката17°-/51°+ - преди горна мъртва точка (ГМТ) + след ГМТ/- преди долна мъртва точка (ДМТ)+ след ДМТИзпускателен клапан отваря/ затваря в градуси от ъгъла на ръчката57°-/13°+ - преди ДМТ+ след ДМТ/- преди ГМТ+ след ГМТКоличество на нужните запалителни свещи/нагревателни свещи4Последователност на запалване1-3-4-2Налягане при сгъстяване9,30 - 13,70 barРазлика макс. 0,98 barСтепен на сгъстяване10,00 :1Минимално налягане на маслото при празен ход0,29 barМаксимално забавяне глава на цилиндъраПределна стойност0,200 ммМинимална височина на цилиндричната глава131,90 ммОхладителна системаНалягане в охладителната система (налягане при отваряне капак на радиатора)0,93 - 1,23 barМинимална стойност 0,83 barТермостатът отваря при температура80° - 84°Запалителна системаЗапалителна система стойностиМомент на запалване-10°00' - преди ГМТ + след ГМТСистема за горивоСистема за гориво общи сведенияВид на моторното горивоOTTO 95 ROZОбработка на сместа обозначениеВпръскване на бензинКонтролни стойности за изгорелите газовеОбщи стойности, съществени за изгорелите газовеПоложение щепсел за диагнозаОбороти на празен ход при скоростната кутия650 - 850 1/minСтойности за изгорелите газове бензинМомент на запалване-10°00' - преди ГМТ + след ГМТСъдържание на CO-при празен ход0,00 - 0,50 %Максимално съдържание на HC-при празен ход100 ppmДанни за ходовата частДжанти и гумиНалягане при пълнене на гумите отпред0,00 barвиж стикера на B -колона от страната на водачаНалягане при пълнене на гумите отзад0,00 barвиж стикера на B -колона от страната на водачаХодова част размериБаза2625 ммКоловоз предни колела1495 ммКоловоз задни колела1505 ммСпирачна уредбаИзмерения на спирачкатаДебелина на спирачния диск преден мост24,00 ммДебелина на спирачния диск граница на износване преден мост22,40 ммМаксимално странично биене на спирачния диск преден мост0,04 ммДебелина на спирачния диск заден мост10,00 ммДебелина на спирачния диск граница на износване заден мост8,40 ммМаксимално странично биене на спирачния диск заден мост0,05 ммДиаметър на спирачния барабан заден мостРъчна спирачка168,00 ммДиаметър на спирачния барабан граница на износване заден мостРъчна спирачка169,00 ммДебелина на спирачната накладка преден мостбез задна пластина10,00 ммДебелина на спирачната накладка заден мостбез задна пластина10,00 ммДебелина на спирачната накладка заден мостРъчна спирачка, без задна пластина2,80 ммДебелина на спирачната накладка граница на износване преден мостбез задна пластина2,00 ммДебелина на спирачната накладка граница на износване заден мостбез задна пластина2,00 ммДебелина на спирачната накладка граница на износване заден мостРъчна спирачка, без задна пластина1,00 ммСпирачен диск диаметър преден мост246,00 ммСпирачен диск диаметър заден мост226,00 ммЕлектроникаИзмервани стойности от датчиците и изпълнителните елементиСъпротивление - температурен датчик за двигателя при 0°6000±700 OhmСъпротивление - температурен датчик за двигателя при 20°2400±300 OhmСъпротивление - температурен датчик за двигателя при 40°1100±200 OhmСъпротивление - температурен датчик за двигателя при 60°580±100 OhmСъпротивление - температурен датчик за двигателя при 80°310±50 OhmСъпротивление - впръскващи клапани10,50 - 13,50 Ohmпри 20°CОбщи сведения за електрическата частНапрежение на акумулатора12 волтаСъпротивление на ротора4,00Данни на производителя 3 - 5 OhmКонсумативиКоличество запълващи вещества и спецификацииДвигателно масло с филтър4,30 литраВискозност моторно маслоAPI SJ0W-30, 0W-40, 10W-40, 15W-40, 20W-50Вискозност моторно маслоAPI SLSAE 0W-30|SAE 0W-40|SAE 5W-30|SAE 5W-40|SAE 10W-40|SAE 10W-60|SAE 15W-40|SAE 20W-50Вискозност моторно маслоAPI SMSAE 0W-20|SAE 0W-30|SAE 0W-40|SAE 5W-30|SAE 5W-40|SAE 10W-40|SAE 10W-60Вискозност моторно маслоAPI SNSAE 0W-30|SAE 0W-40|SAE 5W-30|SAE 5W-40|SAE 10W-40|SAE 10W-60Вискозност моторно маслоACEA A1/B1SAE 0W-30|SAE 5W-30Вискозност моторно маслоACEA A2/B2SAE 10W-30|SAE 10W-40|SAE 15W-40Вискозност моторно маслоACEA A3/B3SAE 0W-40|SAE 5W-30|SAE 5W-40|SAE 10W-40|SAE 10W-60|SAE 15W-40Вискозност моторно маслоAPI SGSAE 10W-40|SAE 15W-40|SAE 20W-50Вискозност моторно маслоAPI SHSAE 10W-30|SAE 10W-40|SAE 15W-40|SAE 15W-50|SAE 20W-50Спецификация двигателно маслоACEA A1/B1|ACEA A2/B2|ACEA A3/B3|API SG|API SH|API SJ|API SK/SL|API SM|API SNМасло за скоростната кутияс предвателната кутия 5-ход2,20 литраСпецификация масло за скоростна кутияс предвателната кутия 5-ходAPI GL4 SAE 75W-90Масло за разпределеителна скоростна кутия0,55 литраСпецификация разпределителна предавателна кутияAPI GL5 SAE 90Масло за сервоуправлението1,00 литраСпецификация масло за сервоуправлениетоATF Dexron II|ATF Dexron IIIАнтифриз7,00 литраСпецификация охладителна течностОригинален антифризСпирачна течност при смяна1,20 литраСпецификация спирачна течностDOT 4Средства за охлаждане климатична инсталация530 - 570 грамаСпецификация охлаждащи средстваR134aСпецификация охлаждащо маслоSUN PAG 56ОсветлениеПредни фаровеСветлини за дневно каранеПринадлежащи артикулиDAY1Задни фаровеДопълнителни стоповеLEDИнтервали за смянаЗа сервизни данниУправление на двигателя със зъбчат ремък променлив интервална всеки 90.000 km / 6 годиниУправление на двигателя със зъбчат ремък режим на контролне е предписано от производителяБалансов вал със зъбчат ремък променлив интервална всеки 90.000 km / 6 годиниВъздушен филтър интервал за смянадо 2004/03на всеки 30.000 km / 2 годиниВъздушен филтър интервал за смянаот 2004/04 и нагорена всеки 45.000 km / 3 годиниФилтър за гориво интервал за смянана всеки 150.000 km / 10 годиниЗапалителни свещи интервал за смянана всеки 90.000 km / 6 годиниСпирачна течност интервал за смянадо 2004/03на всеки 30.000 km / 2 годиниСпирачна течност интервал за смянаот 2004/04 и нагорена всеки 45.000 km / 3 годиниОхлаждащи средства за двигателя интервал за смянана всеки 60.000 km / 4 годиниМасло за предавателна кутия интервал за смянана всеки 105.000 km / 7 годиниМоторно масло и филтър интервал за смянана всеки 15.000 km / веднъж годишноПодновете батерията за дистанционно управлениена всеки 30.000 km / 2 годиниФилтър купе интервал за смянана всеки 15.000 km / веднъж годишноИзбраното МПС е успешно добавено във вашия гараж. +
-
Огромен избор Над 800 000 авточасти
-
Купи на кредит с ТБИ Минимална сума 150 лв.
-
Експресна доставка Наложен платеж и преглед
-
14 дни срок Връщане или замяна