ARP болтове и шпилки Mitsubishi за Mitsubishi Pajero Van (V90,V80) 3.2 TD 4WD (V88V, V98V) - 200 коня дизел 4M41 - онлайн магазин
.jpg)
200 к.с - дизел
от 01.2010
-
ARP 2000 5/16" connecting rod screws in 38.1mm length.
Universally applicable for all H-shank connecting rods.
ARP connecting rod bolts have been developed for the highest requirements and offer optimum safety.
The connecting rod bolts are heat treated and rolled, which gives them up to 10 times higher fatigue strength.
Especially for tuned engines highly recommended!
Connecting rod bearings best to replace directly with.A 3/8" nut should be used for installation.
More information on the correct tightening of the connecting rod bolts HERE
-
ARP 5/16 "rod bolts with 38,1mm in length.
Universally applicable for all H-Beam conrods .
ARP custom age 625 + have been developed for the highest requirements and provide optimum safety.
At high engine speed, it arrives at the Aufwertsbewegung the piston to high tensile forces acting on the connecting rod according to Kurbelwellenhub more or less.
To avoid this, a screw is recommended Pleulschraube tear as it has a tensile strength of 260-280 PSI, compared to having only a 2000 ARP Zugfestigkit of 220 PSI
The rod bolts are heat treated and rolled, giving them up to 10 times higher fatigue strength.
Especially for tuned engines highly recommended!
Best exchange directly connecting rod bearings.
(Price for one Bolt.)More information on how to properly tighten the connecting rod bolts
-
ARP 625+ custom age headstud KIT for Mitsubishi 4G63 engines M11
ARP custom age 625+ have been developed for the highest requirements and provide optimum safety.
The Studs are heat treated and rolled, giving them up to 10 times higher fatigue strength compared to normal ARP bolts!
(Price for a complete Set) -
Digital High End Dial Indicator from ARP for measuring the extension of expansion screws.
When fitting connecting rod bolts, the tightening torque is only of secondary importance. Much more important is the extension of the screw.
This stretch can be measured accurately with the ARP dial gauge.
ARP has taken accuracy to the next level with the introduction of a digital stretch gauge that measures to the ten-thousandth (0.0001-inch).
Accurate readings are made by opposing ball and pin probes centered on the bolt. A uniquely designed aluminum handle facilitates operation.
ALWAYS fit and tighten connecting rod bolts with sufficient ARP Ultra Torque Paste!
For further information about assambling rod bolts correctly, click here
Here is our video on the correct installation of connecting rods and connecting rod bolts:
ARP strech gauge for a perfect conrod bolts assembly. If you want to torque your conrod bolts in a professional way you have to measure the strech and not the torque. This ARP gauge is individually adjustable to measure each kind of conrod bolts. Always use ARP ultra torque grease for conrod assembly.
Here is our video on the correct installation of connecting rods and connecting rod bolts:
"Spezial ARP ultra torque assembly lubricant for professional fittment of each kind of ARP bolts or studs.
All ARP bolts and studs threads should be thigthen up with this ARP Moly Assembly Lubricant called ultra torque to mentain correct torques specifications.
All ARP kit have this lubricant included.
"
"Spezial ARP ultra torque assembly lubricant for professional fittment of each kind of ARP bolts or studs.
All ARP bolts and studs threads should be thigthen up with this ARP Moly Assembly Lubricant called ultra torque to mentain correct torques specifications.
Big can (approx. 350 gramms) with brush included.
"
M10 x 1.25 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M10 x 1.25 x 20 20 mm n.a. M10 x 1.25 x 25 25 mm n.a. M10 x 1.25 x 30 30 mm n.a. M10 x 1.25 x 35 35 mm n.a. M10 x 1.25 x 40 26 mm 14 mm M10 x 1.25 x 45 26 mm 19 mm M10 x 1.25 x 50 26 mm 24 mm M10 x 1.25 x 60 26 mm 34 mm M10 x 1.25 x 70 26 mm 44 mm M10 x 1.25 x 80 26 mm 54 mm M10 x 1.25 x 90 26 mm 64 mm M10 x 1.25 x 100 26 mm 74 mm
M10 x 1.50 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M10 x 1.50 x 20 20 mm n.a. M10 x 1.50 x 25 25 mm n.a. M10 x 1.50 x 30 30 mm n.a. M10 x 1.50 x 35 35 mm n.a. M10 x 1.50 x 40 26 mm 14 mm M10 x 1.50 x 45 26 mm 19 mm M10 x 1.50 x 50 26 mm 24 mm M10 x 1.50 x 60 26 mm 34 mm M10 x 1.50 x 65 26 mm 39 mm M10 x 1.50 x 70 26 mm 44 mm M10 x 1.50 x 80 26 mm 54 mm M10 x 1.50 x 90 26 mm 64 mm M10 x 1.50 x 100 26 mm 74 mm
M12 x 1.50 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M12 x 1.50 x 25 25 mm n.a. M12 x 1.50 x 30 30 mm n.a. M12 x 1.50 x 35 30 mm 5 mm M12 x 1.50 x 40 30 mm 10 mm M12 x 1.50 x 45 30 mm 15 mm M12 x 1.50 x 50 30 mm 20 mm M12 x 1.50 x 60 30 mm 30 mm M12 x 1.50 x 70 30 mm 40 mm M12 x 1.50 x 80 30 mm 50 mm M12 x 1.50 x 90 30 mm 60 mm M12 x 1.50 x 100 30 mm 70 mm
M12 x 1.75 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M12 x 1.75 x 25 25 mm n.a. M12 x 1.75 x 30 30 mm n.a. M12 x 1.75 x 35 30 mm 5 mm M12 x 1.75 x 40 30 mm 10 mm M12 x 1.75 x 45 30 mm 15 mm M12 x 1.75 x 50 30 mm 20 mm M12 x 1.75 x 60 30 mm 30 mm M12 x 1.75 x 70 30 mm 40 mm M12 x 1.75 x 80 30 mm 50 mm M12 x 1.75 x 90 30 mm 60 mm M12 x 1.75 x 100 30 mm 70 mm
M6 x 1.00 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M6 x 1.00 x 12 12 mm n.a. M6 x 1.00 x 16 16 mm n.a. M6 x 1.00 x 20 20 mm n.a. M6 x 1.00 x 25 25 mm n.a. M6 x 1.00 x 30 18 mm 12 mm M6 x 1.00 x 35 18 mm 17 mm M6 x 1.00 x 40 18 mm 22 mm M6 x 1.00 x 45 18 mm 27 mm M6 x 1.00 x 50 18 mm 32 mm M6 x 1.00 x 55 18 mm 37 mm M6 x 1.00 x 60 18 mm 42 mm M6 x 1.00 x 65 18 mm 47 mm M6 x 1.00 x 70 18 mm 52 mm M6 x 1.00 x 75 18 mm 57 mm M6 x 1.00 x 80 18 mm 62 mm M6 x 1.00 x 90 18 mm 72 mm M6 x 1.00 x 100 18 mm 82 mm M6 x 1.00 x 135 18 mm 117 mm
M8 x 1.25 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M8 x 1.25 x 12 12 mm n.a. M8 x 1.25 x 16 16 mm n.a. M8 x 1.25 x 20 20 mm n.a. M8 x 1.25 x 25 25 mm n.a. M8 x 1.25 x 30 22 mm 8 mm M8 x 1.25 x 35 22 mm 13 mm M8 x 1.25 x 40 22 mm 18 mm M8 x 1.25 x 45 22 mm 23 mm M8 x 1.25 x 50 22 mm 28 mm M8 x 1.25 x 55 22 mm 33 mm M8 x 1.25 x 60 22 mm 38 mm M8 x 1.25 x 65 22 mm 43 mm M8 x 1.25 x 70 22 mm 48 mm M8 x 1.25 x 75 22 mm 53 mm M8 x 1.25 x 80 22 mm 58 mm M8 x 1.25 x 85 22 mm 63 mm M8 x 1.25 x 90 22 mm 68 mm M8 x 1.25 x 100 22 mm 78 mm
ARP Conrod bolt kit for Mitsubishi 2.0L (4B11) DOHC (2008 & later) M8.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
(Click on the PDF box to download instruction)
ARP Turbo Head Stud Kit for MITSUBISHI 2.0L 4B11 DOHC (2008 & später).
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for MITSUBISHI 2.0L 4G63 DOHC (1994-07) M11.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP conrod bolt set for Mitsubishi 2.0L (4G63) DOHC (1994-2007) M8.
Forged from high strength chrome moly steel with 200,000 psi tensile strength nearly twice as strong as the best factory OEM stock bolts.
- Perfectly rolled threads are virtually indestructible with the material used.
- These bolts are especially recommended for tuned engines.
ARP - world leader in the field of engine bolts produces top quality products of unparalleled quality, unsurpassed strength and forged to the nanometer.
ARP Head Stud Kit for MITSUBISHI 2.0L 4G63 DOHC M11.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for MITSUBISHI 2.0L 4G63 M12.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Conrod bolt kit for Mitsubishi 2.0L (4G63) DOHC (1993 & earlier) M9.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
ARP Head Stud Kit for MITSUBISHI 2.0L DOHC (1993 & earlier) M12 ARP 4 cyl. 16V.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Main Stud Kit für MITSUBISHI 2.0L (4B11) DOHC (2008 & later) turbo.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
-Due to advanced manufacturing processes ARP studs reach highest strength and stability.
-Tensile strength of 200.000 psi (13,8t/cm²).
-Absolutely perfectly round and straight studs for a first-class assembly.
-All kits come with ARP hardened washers and high quality nuts.
-Harder, more durable, stable, and processed better than any OEM products.
-10 times stronger threads than the competetive products by thread cut after curing.
-Highest ARP quality product for professional use.
-Fully reusable.
(Click on the PDF box to download instruction)
ARP Main Stud Kit for MITSUBISHI 2.0L (4G63) DOHC (2007 & earlier), 4-cylinder 12pt.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Main Stud Kit for MITSUBISHI 2.6L (G54B) 2-bolt.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for MITSUBISHI 2.6L 12pt.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP conrod bolt set for Mitsubishi 2.6L.
Forged from high-strength chrome moly steel with 200,000 psi tensile strength nearly twice as strong as the best factory OEM stock bolts.
- Perfectly rolled threads are virtually indestructible with the material used.
- These bolts are especially recommended for tuned engines.
ARP - world leader in the field of engine bolts produces top quality products of unparalleled quality, unsurpassed strength and forged to the nanometer.
ARP Conrod bolt kit for Mitsubishi 3.0L & 3.5L V6.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
ARP Head Stud Kit for MITSUBISHI 3.0L 6G72 DOHC V6 ARP2000.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Main Stud Kit for MITSUBISHI 3.0L, 6G72 V6 (1993 & later).
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Flywheel bolt kit for Opel/Vauxhall 2.0L 16V.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.- Perfectly crafted rolled threads from indestructible material.
- These bolts are ideal for tuned engines and are highly recommended by higher tourqe.
- Set of 8 pcs of high-strenght bolts
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
Single nut for all ARP studs. Should you ever lose one, no problem.
- 100% reusable
- Stainless
- Extremely temperature resistant
Price for a nut with a washer
Single nut in our high boost version for almost all stud bolt from ARP. Should you ever lose or damage one, no problem.
- 100% reusable
- stainless
- extremely temperature resistant
Price for one nut.
Spezial tool to fit ARP studs in the Cylinder head.
Some kits from ARP may include this tool, but we just sell it always seperately. This makes the kits much more cheaper in the end.
This tool is needed for the 1.8T engine.
Internal multi-tooth socket for mounting ARP nuts and bolts.
12 square socket with 1/2 inch drive for tightening ARP nuts. This ARP tool is available in different sizes and is needed for the assembly of all ARP stud bolt and screws.
Available in the following sizes: 8-20mm
Спирачна системаСпирачна система - Mitsubishi Pajero Van (V90,V80) 3.2 TD 4WD (V88V, V98V)ЗатвориОкачване на колелатаОкачване на колелата - Mitsubishi Pajero Van (V90,V80) 3.2 TD 4WD (V88V, V98V)ЗатвориКормилна системаКормилна система - Mitsubishi Pajero Van (V90,V80) 3.2 TD 4WD (V88V, V98V)ЗатвориЗадвижване на колелатаЗадвижване на колелата - Mitsubishi Pajero Van (V90,V80) 3.2 TD 4WD (V88V, V98V)ЗатвориТрансмисияТрансмисия - Mitsubishi Pajero Van (V90,V80) 3.2 TD 4WD (V88V, V98V)ЗатвориРемъчно задвижванеРемъчно задвижване - Mitsubishi Pajero Van (V90,V80) 3.2 TD 4WD (V88V, V98V)ЗатвориЧасти за двигателЧасти за двигател - Mitsubishi Pajero Van (V90,V80) 3.2 TD 4WD (V88V, V98V)ЗатвориЧасти за цилиндров блокЧасти за цилиндров блок - Mitsubishi Pajero Van (V90,V80) 3.2 TD 4WD (V88V, V98V)ЗатвориГарнитуриГарнитури - Mitsubishi Pajero Van (V90,V80) 3.2 TD 4WD (V88V, V98V)ЗатвориОхладителна системаОхладителна система - Mitsubishi Pajero Van (V90,V80) 3.2 TD 4WD (V88V, V98V)ЗатвориКлиматична системаКлиматична система - Mitsubishi Pajero Van (V90,V80) 3.2 TD 4WD (V88V, V98V)ЗатвориОтопление и вентилацияОтопление и вентилация - Mitsubishi Pajero Van (V90,V80) 3.2 TD 4WD (V88V, V98V)ЗатвориФилтриФилтри - Mitsubishi Pajero Van (V90,V80) 3.2 TD 4WD (V88V, V98V)ЗатвориМасла и течностиМасла и течности - Mitsubishi Pajero Van (V90,V80) 3.2 TD 4WD (V88V, V98V)ЗатвориЗапалителна системаЗапалителна система - Mitsubishi Pajero Van (V90,V80) 3.2 TD 4WD (V88V, V98V)ЗатвориДатчици и сензориДатчици и сензори - Mitsubishi Pajero Van (V90,V80) 3.2 TD 4WD (V88V, V98V)ЗатвориГоривна системаГоривна система - Mitsubishi Pajero Van (V90,V80) 3.2 TD 4WD (V88V, V98V)ЗатвориЕлектрическа системаЕлектрическа система - Mitsubishi Pajero Van (V90,V80) 3.2 TD 4WD (V88V, V98V)ЗатвориСтартова системаСтартова система - Mitsubishi Pajero Van (V90,V80) 3.2 TD 4WD (V88V, V98V)ЗатвориПочистване на стъклатаПочистване на стъклата - Mitsubishi Pajero Van (V90,V80) 3.2 TD 4WD (V88V, V98V)ЗатвориАуспуси и гърнетаАуспуси и гърнета - Mitsubishi Pajero Van (V90,V80) 3.2 TD 4WD (V88V, V98V)ЗатвориЕдрогабаритни частиЕдрогабаритни части - Mitsubishi Pajero Van (V90,V80) 3.2 TD 4WD (V88V, V98V)ЗатвориСветлиниСветлини - Mitsubishi Pajero Van (V90,V80) 3.2 TD 4WD (V88V, V98V)ЗатвориИнтериорИнтериор - Mitsubishi Pajero Van (V90,V80) 3.2 TD 4WD (V88V, V98V)ЗатвориДобавкиДобавки - Mitsubishi Pajero Van (V90,V80) 3.2 TD 4WD (V88V, V98V)ЗатвориТунингТунинг - Mitsubishi Pajero Van (V90,V80) 3.2 TD 4WD (V88V, V98V)ЗатвориАвтоаксесоариАвтоаксесоари - Mitsubishi Pajero Van (V90,V80) 3.2 TD 4WD (V88V, V98V)ЗатвориЗадължително оборудванеЗадължително оборудване - Mitsubishi Pajero Van (V90,V80) 3.2 TD 4WD (V88V, V98V)ЗатвориИнструментиИнструменти - Mitsubishi Pajero Van (V90,V80) 3.2 TD 4WD (V88V, V98V)ЗатвориТехнически характеристики
Общи данни
Консумативи
Осветление
Интервали за смянаОбщи данниОбщи сведения основни стойностиВид на управлението на двигателяАнгренажна веригаКоличество на нужните запалителни свещи/нагревателни свещи4Последователност на запалване1-3-4-2КонсумативиКоличество запълващи вещества и спецификацииДвигателно масло с филтър9,80 литраВискозност моторно маслоACEA A3/B40W-30, 0W-40, 5W-30, 5W-40, 5W-50, 10W-40, 10W-60, 15W-40Вискозност моторно маслоAPI CDSAE 30W|SAE 10W-30|SAE 15W-40|SAE 20W-50Вискозност моторно маслоAPI CESAE 10W-40Вискозност моторно маслоAPI CF-4SAE 10W-30|SAE 10W-40|SAE 15W-40Вискозност моторно маслоACEA A1/B1SAE 0W-30|SAE 5W-30Вискозност моторно маслоACEA A3/B3SAE 0W-40|SAE 5W-30|SAE 5W-40|SAE 10W-40|SAE 10W-60|SAE 15W-40Вискозност моторно маслоACEA A5/B5SAE 0W-20|SAE 0W-30|SAE 5W-30Вискозност моторно маслоACEA C1SAE 5W-30Вискозност моторно маслоACEA C2SAE 0W-30|SAE 5W-30|SAE 0W-40|SAE 5W-40Вискозност моторно маслоACEA C3SAE 0W-30|SAE 5W-30|SAE 0W-40|SAE 5W-40Вискозност моторно маслоACEA C4SAE 5W-30Спецификация двигателно маслобез филтър за частициACEA A1/B1|ACEA A3/B3|ACEA A3/B4|ACEA A5/B5|API CD|API CE|API CF-4Спецификация двигателно маслос противопрахов филтърACEA C1|ACEA C2|ACEA C3|ACEA C4Масло за скоростната кутияСкоростна кутия V5M313,20 литраСпецификация масло за скоростна кутияСкоростна кутия V5M31API GL4 SAE 75W-85Масло за автоматична скоростна кутияСкоростна кутия V5AWF10,90 литраСпецификация масло за автоматична скоростна кутияСкоростна кутия V5AWFATF PAМасло на диференциала заден мост1,15 литраСпецификация масло за преден мостНад 10°CAPI GL5 SAE 90Спецификация масло за преден мостПод 10°CAPI GL5 SAE 80WДиференциално масло заден мост1,60 литраСпецификация масло за заден мостНад 10°CAPI GL5 SAE 90Спецификация масло за заден мостПод 10°CAPI GL5 SAE 80WМасло за разпределеителна скоростна кутия2,80 литраСпецификация разпределителна предавателна кутияAPI GL4 SAE 75W-90Масло за сервоуправлението1,00 литраСпецификация масло за сервоуправлениетоATF Dexron II|ATF Dexron IIIАнтифриз9,00 литраАнтифризсъс задно отопление10,50 литраСпецификация охладителна течностMITSUBISHI MOTORS Genuine CoolantОригинален антифризСпирачна течност при смяна1,20 литраСпецификация спирачна течностDOT 3|DOT 4Средства за охлаждане климатична инсталациябез климатик в задната част на купето530 - 570 грамаСредства за охлаждане климатична инсталацияс климатик в задната част на купето850 - 890 грамаСпецификация охлаждащи средстваR134aМасло климатична инсталациябез климатик в задната част на купето120 cm³Масло климатична инсталацияс климатик в задната част на купето180 cm³Спецификация охлаждащо маслоDenso ND - OIL 6Обем на резервоара за горивокъса база на автомобила69 литраОбем на резервоара за гориводълга база на автомобила88 литраОсветлениеПредни фаровеКъси светлинис халогенни фаровеH11 12V 55W PGJ19-2
Къси светлинидо 2013/03, с ксенонови фаровеD2S 85V 35W P32d-2Къси светлиниот 2013/04 и нагоре, с ксенонови фаровеD4S 85V 35W P32d-5Дълги светлиниH9 12V 65W PGJ19-5Светлини за дневно каранеПринадлежащи артикулиDAY1ГабаритиW5W 12V 5W W2,1x9,5d LonglifeФарове за мъглаH11 12V 55W PGJ19-2Мигач преденWY21W 12V 21W WX3x16d yellowМигач страниченW5W 12V 5W W2,1x9,5dСветлини за окръжаващото полеW5W 12V 5W W2,1x9,5dБлок фарове за мъглаПринадлежащи артикулиFOG1Задни фаровеМигач заденWY21W 12V 21W WX3x16d yellowЗадна светлинаW21/5W 12V 21/5W W3x16qСтопW21/5W 12V 21/5W W3x16qСветлини за обратен ходW21W 12V 21W W3x16dЗадни фарове за мъглаW21W 12V 21W W3x16dОсветление на табелата с регистрационния номерW5W 12V 5W W2,1x9,5dДопълнителни стоповедо 2008W16W 12V 16W W2,1x9,5dДопълнителни стоповеот 2009 и нагореLEDОригинален детайлВътрешни лампиВътрешно осветлениеFestoon 12V 8W SV8,5 (8,2x28)Интервали за смянаЗа сервизни данниАгрегатен ремък - интервал за проверкадо 2010на всеки 20.000 km / веднъж годишноАгрегатен ремък - интервал за проверкаот 2011 и нагорена всеки 15.000 km / веднъж годишноАгрегатен ремък - интервал за проверкаот 2013 и нагорена всеки 20.000 km / веднъж годишноВъздушен филтър интервал за смянадо 2010на всеки 60.000 km / 3 годиниВъздушен филтър интервал за смянаот 2011 и нагорена всеки 45.000 km / 3 годиниВъздушен филтър интервал за смянаот 2013 и нагорена всеки 40.000 km / 2 годиниВъздушен филтър интервал за почистванедо 2010на всеки 20.000 km / веднъж годишноВъздушен филтър интервал за почистванеот 2011 и нагорена всеки 15.000 km / веднъж годишноВъздушен филтър интервал за почистванеот 2013 и нагорена всеки 20.000 km / веднъж годишноФилтър за гориво интервал за смянадо 2010на всеки 40.000 km / 2 годиниФилтър за гориво интервал за смянаот 2011 и нагорена всеки 30.000 km / 2 годиниФилтър за гориво интервал за смянаот 2013 и нагорена всеки 40.000 km / 2 годиниСпирачна течност интервал за смянадо 2010на всеки 40.000 km / 2 годиниСпирачна течност интервал за смянаот 2011 и нагорена всеки 30.000 km / 2 годиниСпирачна течност интервал за смянаот 2013 и нагорена всеки 40.000 km / 2 годиниОхлаждащи средства за двигателя интервал за смянадо 2010на всеки 80.000 km / 4 годиниОхлаждащи средства за двигателя интервал за смянаот 2011 и нагорена всеки 60.000 km / 4 годиниОхлаждащи средства за двигателя интервал за смянаот 2013 и нагорена всеки 60.000 km / 3 годиниМасло за предавателна кутия интервал за смянадо 2010първо на 120.000 km / 6 години, след това всяка 100.000 km / 5 годинаМасло за предавателна кутия интервал за смянаот 2011 и нагорена всеки 105.000 km / 7 годиниМасло за предавателна кутия интервал за смянаот 2013 и нагорена всеки 100.000 km / 5 годиниМасло на предавателна кутия - контролен режимдо 2010на всеки 20.000 km / веднъж годишноМасло на предавателна кутия - контролен режимот 2011 и нагорена всеки 15.000 km / веднъж годишноМасло на предавателна кутия - контролен режимот 2013 и нагорена всеки 20.000 km / веднъж годишноМасло за автоматична скоростна кутия интервал за смянане е предписано от производителяМасло за автоматична скоростна кутия пробен режимдо 2010на всеки 20.000 km / веднъж годишноМасло за автоматична скоростна кутия пробен режимот 2011 и нагорена всеки 15.000 km / веднъж годишноМасло за автоматична скоростна кутия пробен режимот 2013 и нагорена всеки 20.000 km / веднъж годишноМасло за разпределителна кутия интервал за смянадо 2010на всеки 120.000 km / 6 годиниМасло за разпределителна кутия интервал за смянаот 2011 и нагорена всеки 105.000 km / 7 годиниМасло за разпределителна кутия интервал за смянаот 2013 и нагорена всеки 100.000 km / 5 годиниМасло за разпределителната кутия контролен интервалдо 2010на всеки 20.000 km / веднъж годишноМасло за разпределителната кутия контролен интервалот 2011 и нагорена всеки 15.000 / веднъж годишноМасло за разпределителната кутия контролен интервалот 2013 и нагорена всеки 20.000 km / веднъж годишноТрансмисионно масло преден мост Интервал за проверкадо 2010на всяка 20.000 km / 1 годинаТрансмисионно масло преден мост Интервал за проверкаот 2011 и нагорена всеки 30.000 km / 2 годиниТрансмисионно масло преден мост Интервал за проверкаот 2013 и нагорена всяка 20.000 km / 1 годинаТрансмисионно масло за преден мост интервал за смянадо 2010на всеки 120.000 km / 6 годиниТрансмисионно масло за преден мост интервал за смянаот 2011 и нагорена всеки 90.000 km / 6 годиниТрансмисионно масло за преден мост интервал за смянаот 2013 и нагорена всеки 80.000 km / 4 годиниТрансмисионно масло заден мост контролен интервалдо 2010на всяка 20.000 km / 1 годинаТрансмисионно масло заден мост контролен интервалот 2011 и нагорена всеки 30.000 km / 2 годиниТрансмисионно масло заден мост контролен интервалот 2013 и нагорена всяка 20.000 km / 1 годинаТрансмисионно масло за заден мост интервал за смянадо 2010на всеки 120.000 km / 6 годиниТрансмисионно масло за заден мост интервал за смянаот 2011 и нагорена всеки 90.000 km / 6 годиниТрансмисионно масло за заден мост интервал за смянаот 2013 и нагорена всеки 80.000 km / 4 годиниМоторно масло и филтър интервал за смянадо 2010на всяка 20.000 km / 1 годинаМоторно масло и филтър интервал за смянаот 2011 и нагорена всяка 15.000 km / 1 годинаМоторно масло и филтър интервал за смянаот 2013 и нагорена всяка 20.000 km / 1 годинаПодновете батерията за дистанционно управлениедо 2010на всеки 20.000 km / веднъж годишноПодновете батерията за дистанционно управлениеот 2011 и нагорена всеки 15.000 km / веднъж годишноПодновете батерията за дистанционно управлениеот 2013 и нагорена всеки 20.000 km / веднъж годишноФилтър купе интервал за смянадо 2010на всеки 20.000 km / веднъж годишноФилтър купе интервал за смянаот 2011 и нагорена всеки 15.000 km / веднъж годишноФилтър купе интервал за смянаот 2013 и нагорена всеки 20.000 km / веднъж годишноЛуфт на клапана - проверочен режим.до 2010на всеки 40.000 km / 2 годиниЛуфт на клапана - проверочен режим.от 2011 и нагорена всеки 30.000 km / 2 годиниЛуфт на клапана - проверочен режим.от 2013 и нагорена всяка 20.000 km / 1 година
![ARP Custom Age 625+ 5/16" Connection Bolts with 1.5" lenghts ARP arp3006708 Mitsubishi Pajero Van (V90,V80) 3.2 TD 4WD (V88V, V98V)](images/arp-custom-age-625+-5/16"-connection-bolts-with-1.5"-lenghts-imageaplist-5243-3861780.jpg)
Запази
ЗапазиПоследно разгледани
-
Огромен избор Над 800 000 авточасти
-
Купи на кредит с ТБИ Минимална сума 150 лв.
-
Експресна доставка Наложен платеж и преглед
-
14 дни срок Връщане или замяна
ТОП производители
