ARP болтове и шпилки Mitsubishi за Mitsubishi Shogun (V60,V70) 3.2 DI-D (V68W, V78W) - 165 коня дизел 4M41 - онлайн магазин
165 к.с - дизел
04.2000 - 12.2006
-
ARP 2000 5/16" connecting rod screws in 38.1mm length.
Universally applicable for all H-shank connecting rods.
ARP connecting rod bolts have been developed for the highest requirements and offer optimum safety.
The connecting rod bolts are heat treated and rolled, which gives them up to 10 times higher fatigue strength.
Especially for tuned engines highly recommended!
Connecting rod bearings best to replace directly with.A 3/8" nut should be used for installation.
More information on the correct tightening of the connecting rod bolts HERE
-
ARP 5/16 "rod bolts with 38,1mm in length.
Universally applicable for all H-Beam conrods .
ARP custom age 625 + have been developed for the highest requirements and provide optimum safety.
At high engine speed, it arrives at the Aufwertsbewegung the piston to high tensile forces acting on the connecting rod according to Kurbelwellenhub more or less.
To avoid this, a screw is recommended Pleulschraube tear as it has a tensile strength of 260-280 PSI, compared to having only a 2000 ARP Zugfestigkit of 220 PSI
The rod bolts are heat treated and rolled, giving them up to 10 times higher fatigue strength.
Especially for tuned engines highly recommended!
Best exchange directly connecting rod bearings.
(Price for one Bolt.)More information on how to properly tighten the connecting rod bolts
-
ARP 625+ custom age headstud KIT for Mitsubishi 4G63 engines M11
ARP custom age 625+ have been developed for the highest requirements and provide optimum safety.
The Studs are heat treated and rolled, giving them up to 10 times higher fatigue strength compared to normal ARP bolts!
(Price for a complete Set) -
Digital High End Dial Indicator from ARP for measuring the extension of expansion screws.
When fitting connecting rod bolts, the tightening torque is only of secondary importance. Much more important is the extension of the screw.
This stretch can be measured accurately with the ARP dial gauge.
ARP has taken accuracy to the next level with the introduction of a digital stretch gauge that measures to the ten-thousandth (0.0001-inch).
Accurate readings are made by opposing ball and pin probes centered on the bolt. A uniquely designed aluminum handle facilitates operation.
ALWAYS fit and tighten connecting rod bolts with sufficient ARP Ultra Torque Paste!
For further information about assambling rod bolts correctly, click here
Here is our video on the correct installation of connecting rods and connecting rod bolts:
ARP strech gauge for a perfect conrod bolts assembly. If you want to torque your conrod bolts in a professional way you have to measure the strech and not the torque. This ARP gauge is individually adjustable to measure each kind of conrod bolts. Always use ARP ultra torque grease for conrod assembly.
Here is our video on the correct installation of connecting rods and connecting rod bolts:
"Spezial ARP ultra torque assembly lubricant for professional fittment of each kind of ARP bolts or studs.
All ARP bolts and studs threads should be thigthen up with this ARP Moly Assembly Lubricant called ultra torque to mentain correct torques specifications.
All ARP kit have this lubricant included.
"
"Spezial ARP ultra torque assembly lubricant for professional fittment of each kind of ARP bolts or studs.
All ARP bolts and studs threads should be thigthen up with this ARP Moly Assembly Lubricant called ultra torque to mentain correct torques specifications.
Big can (approx. 350 gramms) with brush included.
"
M10 x 1.25 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M10 x 1.25 x 20 20 mm n.a. M10 x 1.25 x 25 25 mm n.a. M10 x 1.25 x 30 30 mm n.a. M10 x 1.25 x 35 35 mm n.a. M10 x 1.25 x 40 26 mm 14 mm M10 x 1.25 x 45 26 mm 19 mm M10 x 1.25 x 50 26 mm 24 mm M10 x 1.25 x 60 26 mm 34 mm M10 x 1.25 x 70 26 mm 44 mm M10 x 1.25 x 80 26 mm 54 mm M10 x 1.25 x 90 26 mm 64 mm M10 x 1.25 x 100 26 mm 74 mm
M10 x 1.50 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M10 x 1.50 x 20 20 mm n.a. M10 x 1.50 x 25 25 mm n.a. M10 x 1.50 x 30 30 mm n.a. M10 x 1.50 x 35 35 mm n.a. M10 x 1.50 x 40 26 mm 14 mm M10 x 1.50 x 45 26 mm 19 mm M10 x 1.50 x 50 26 mm 24 mm M10 x 1.50 x 60 26 mm 34 mm M10 x 1.50 x 65 26 mm 39 mm M10 x 1.50 x 70 26 mm 44 mm M10 x 1.50 x 80 26 mm 54 mm M10 x 1.50 x 90 26 mm 64 mm M10 x 1.50 x 100 26 mm 74 mm
M12 x 1.50 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M12 x 1.50 x 25 25 mm n.a. M12 x 1.50 x 30 30 mm n.a. M12 x 1.50 x 35 30 mm 5 mm M12 x 1.50 x 40 30 mm 10 mm M12 x 1.50 x 45 30 mm 15 mm M12 x 1.50 x 50 30 mm 20 mm M12 x 1.50 x 60 30 mm 30 mm M12 x 1.50 x 70 30 mm 40 mm M12 x 1.50 x 80 30 mm 50 mm M12 x 1.50 x 90 30 mm 60 mm M12 x 1.50 x 100 30 mm 70 mm
M12 x 1.75 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M12 x 1.75 x 25 25 mm n.a. M12 x 1.75 x 30 30 mm n.a. M12 x 1.75 x 35 30 mm 5 mm M12 x 1.75 x 40 30 mm 10 mm M12 x 1.75 x 45 30 mm 15 mm M12 x 1.75 x 50 30 mm 20 mm M12 x 1.75 x 60 30 mm 30 mm M12 x 1.75 x 70 30 mm 40 mm M12 x 1.75 x 80 30 mm 50 mm M12 x 1.75 x 90 30 mm 60 mm M12 x 1.75 x 100 30 mm 70 mm
M6 x 1.00 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M6 x 1.00 x 12 12 mm n.a. M6 x 1.00 x 16 16 mm n.a. M6 x 1.00 x 20 20 mm n.a. M6 x 1.00 x 25 25 mm n.a. M6 x 1.00 x 30 18 mm 12 mm M6 x 1.00 x 35 18 mm 17 mm M6 x 1.00 x 40 18 mm 22 mm M6 x 1.00 x 45 18 mm 27 mm M6 x 1.00 x 50 18 mm 32 mm M6 x 1.00 x 55 18 mm 37 mm M6 x 1.00 x 60 18 mm 42 mm M6 x 1.00 x 65 18 mm 47 mm M6 x 1.00 x 70 18 mm 52 mm M6 x 1.00 x 75 18 mm 57 mm M6 x 1.00 x 80 18 mm 62 mm M6 x 1.00 x 90 18 mm 72 mm M6 x 1.00 x 100 18 mm 82 mm M6 x 1.00 x 135 18 mm 117 mm
M8 x 1.25 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M8 x 1.25 x 12 12 mm n.a. M8 x 1.25 x 16 16 mm n.a. M8 x 1.25 x 20 20 mm n.a. M8 x 1.25 x 25 25 mm n.a. M8 x 1.25 x 30 22 mm 8 mm M8 x 1.25 x 35 22 mm 13 mm M8 x 1.25 x 40 22 mm 18 mm M8 x 1.25 x 45 22 mm 23 mm M8 x 1.25 x 50 22 mm 28 mm M8 x 1.25 x 55 22 mm 33 mm M8 x 1.25 x 60 22 mm 38 mm M8 x 1.25 x 65 22 mm 43 mm M8 x 1.25 x 70 22 mm 48 mm M8 x 1.25 x 75 22 mm 53 mm M8 x 1.25 x 80 22 mm 58 mm M8 x 1.25 x 85 22 mm 63 mm M8 x 1.25 x 90 22 mm 68 mm M8 x 1.25 x 100 22 mm 78 mm
ARP Conrod bolt kit for Mitsubishi 2.0L (4B11) DOHC (2008 & later) M8.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
(Click on the PDF box to download instruction)
ARP Turbo Head Stud Kit for MITSUBISHI 2.0L 4B11 DOHC (2008 & später).
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for MITSUBISHI 2.0L 4G63 DOHC (1994-07) M11.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP conrod bolt set for Mitsubishi 2.0L (4G63) DOHC (1994-2007) M8.
Forged from high strength chrome moly steel with 200,000 psi tensile strength nearly twice as strong as the best factory OEM stock bolts.
- Perfectly rolled threads are virtually indestructible with the material used.
- These bolts are especially recommended for tuned engines.
ARP - world leader in the field of engine bolts produces top quality products of unparalleled quality, unsurpassed strength and forged to the nanometer.
ARP Head Stud Kit for MITSUBISHI 2.0L 4G63 DOHC M11.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for MITSUBISHI 2.0L 4G63 M12.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Conrod bolt kit for Mitsubishi 2.0L (4G63) DOHC (1993 & earlier) M9.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
ARP Head Stud Kit for MITSUBISHI 2.0L DOHC (1993 & earlier) M12 ARP 4 cyl. 16V.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Main Stud Kit für MITSUBISHI 2.0L (4B11) DOHC (2008 & later) turbo.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
-Due to advanced manufacturing processes ARP studs reach highest strength and stability.
-Tensile strength of 200.000 psi (13,8t/cm²).
-Absolutely perfectly round and straight studs for a first-class assembly.
-All kits come with ARP hardened washers and high quality nuts.
-Harder, more durable, stable, and processed better than any OEM products.
-10 times stronger threads than the competetive products by thread cut after curing.
-Highest ARP quality product for professional use.
-Fully reusable.
(Click on the PDF box to download instruction)
ARP Main Stud Kit for MITSUBISHI 2.0L (4G63) DOHC (2007 & earlier), 4-cylinder 12pt.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Main Stud Kit for MITSUBISHI 2.6L (G54B) 2-bolt.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for MITSUBISHI 2.6L 12pt.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP conrod bolt set for Mitsubishi 2.6L.
Forged from high-strength chrome moly steel with 200,000 psi tensile strength nearly twice as strong as the best factory OEM stock bolts.
- Perfectly rolled threads are virtually indestructible with the material used.
- These bolts are especially recommended for tuned engines.
ARP - world leader in the field of engine bolts produces top quality products of unparalleled quality, unsurpassed strength and forged to the nanometer.
ARP Conrod bolt kit for Mitsubishi 3.0L & 3.5L V6.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
ARP Head Stud Kit for MITSUBISHI 3.0L 6G72 DOHC V6 ARP2000.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Main Stud Kit for MITSUBISHI 3.0L, 6G72 V6 (1993 & later).
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Flywheel bolt kit for Opel/Vauxhall 2.0L 16V.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.- Perfectly crafted rolled threads from indestructible material.
- These bolts are ideal for tuned engines and are highly recommended by higher tourqe.
- Set of 8 pcs of high-strenght bolts
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
Single nut for all ARP studs. Should you ever lose one, no problem.
- 100% reusable
- Stainless
- Extremely temperature resistant
Price for a nut with a washer
Single nut in our high boost version for almost all stud bolt from ARP. Should you ever lose or damage one, no problem.
- 100% reusable
- stainless
- extremely temperature resistant
Price for one nut.
Spezial tool to fit ARP studs in the Cylinder head.
Some kits from ARP may include this tool, but we just sell it always seperately. This makes the kits much more cheaper in the end.
This tool is needed for the 1.8T engine.
Internal multi-tooth socket for mounting ARP nuts and bolts.
12 square socket with 1/2 inch drive for tightening ARP nuts. This ARP tool is available in different sizes and is needed for the assembly of all ARP stud bolt and screws.
Available in the following sizes: 8-20mm
Спирачна системаСпирачна система - Mitsubishi Shogun (V60,V70) 3.2 DI-D (V68W, V78W)ЗатвориОкачване на колелатаОкачване на колелата - Mitsubishi Shogun (V60,V70) 3.2 DI-D (V68W, V78W)ЗатвориКормилна системаКормилна система - Mitsubishi Shogun (V60,V70) 3.2 DI-D (V68W, V78W)ЗатвориЗадвижване на колелатаЗадвижване на колелата - Mitsubishi Shogun (V60,V70) 3.2 DI-D (V68W, V78W)ЗатвориТрансмисияТрансмисия - Mitsubishi Shogun (V60,V70) 3.2 DI-D (V68W, V78W)ЗатвориРемъчно задвижванеРемъчно задвижване - Mitsubishi Shogun (V60,V70) 3.2 DI-D (V68W, V78W)ЗатвориЧасти за двигателЧасти за двигател - Mitsubishi Shogun (V60,V70) 3.2 DI-D (V68W, V78W)ЗатвориЧасти за цилиндров блокЧасти за цилиндров блок - Mitsubishi Shogun (V60,V70) 3.2 DI-D (V68W, V78W)ЗатвориГарнитуриГарнитури - Mitsubishi Shogun (V60,V70) 3.2 DI-D (V68W, V78W)ЗатвориОхладителна системаОхладителна система - Mitsubishi Shogun (V60,V70) 3.2 DI-D (V68W, V78W)ЗатвориКлиматична системаКлиматична система - Mitsubishi Shogun (V60,V70) 3.2 DI-D (V68W, V78W)ЗатвориОтопление и вентилацияФилтриФилтри - Mitsubishi Shogun (V60,V70) 3.2 DI-D (V68W, V78W)ЗатвориМасла и течностиМасла и течности - Mitsubishi Shogun (V60,V70) 3.2 DI-D (V68W, V78W)ЗатвориЗапалителна системаЗапалителна система - Mitsubishi Shogun (V60,V70) 3.2 DI-D (V68W, V78W)ЗатвориДатчици и сензориДатчици и сензори - Mitsubishi Shogun (V60,V70) 3.2 DI-D (V68W, V78W)ЗатвориГоривна системаГоривна система - Mitsubishi Shogun (V60,V70) 3.2 DI-D (V68W, V78W)ЗатвориЕлектрическа системаЕлектрическа система - Mitsubishi Shogun (V60,V70) 3.2 DI-D (V68W, V78W)ЗатвориСтартова системаСтартова система - Mitsubishi Shogun (V60,V70) 3.2 DI-D (V68W, V78W)ЗатвориПочистване на стъклатаПочистване на стъклата - Mitsubishi Shogun (V60,V70) 3.2 DI-D (V68W, V78W)ЗатвориАуспуси и гърнетаАуспуси и гърнета - Mitsubishi Shogun (V60,V70) 3.2 DI-D (V68W, V78W)ЗатвориЕдрогабаритни частиЕдрогабаритни части - Mitsubishi Shogun (V60,V70) 3.2 DI-D (V68W, V78W)ЗатвориСветлиниСветлини - Mitsubishi Shogun (V60,V70) 3.2 DI-D (V68W, V78W)ЗатвориИнтериорИнтериор - Mitsubishi Shogun (V60,V70) 3.2 DI-D (V68W, V78W)ЗатвориДобавкиДобавки - Mitsubishi Shogun (V60,V70) 3.2 DI-D (V68W, V78W)ЗатвориТунингТунинг - Mitsubishi Shogun (V60,V70) 3.2 DI-D (V68W, V78W)ЗатвориАвтоаксесоариАвтоаксесоари - Mitsubishi Shogun (V60,V70) 3.2 DI-D (V68W, V78W)ЗатвориЗадължително оборудванеЗадължително оборудване - Mitsubishi Shogun (V60,V70) 3.2 DI-D (V68W, V78W)ЗатвориИнструментиИнструменти - Mitsubishi Shogun (V60,V70) 3.2 DI-D (V68W, V78W)ЗатвориТехнически характеристики
Общи данни
Система за гориво
Контролни стойности за изгорелите газове
Данни за ходовата част
Спирачна уредба
Консумативи
Осветление
Интервали за смянаОбщи данниОбщи сведения основни стойностиВид на управлението на двигателяАнгренажна веригаХод105,00 ммВътрешен диаметър на цилиндъра98,50 ммВентили за един цилиндър4Луфт на вентила - всмукателен клапанДвигател студен0,10 ммЛуфт на вентила - изпускателен клапанДвигател студен0,15 ммВсмукателен клапан отваря/ затваря в градуси от ъгъла на ръчката13°-/31°+ - преди горна мъртва точка (ГМТ) + след ГМТ/- преди долна мъртва точка (ДМТ)+ след ДМТИзпускателен клапан отваря/ затваря в градуси от ъгъла на ръчката55°-/17°+ - преди ДМТ+ след ДМТ/- преди ГМТ+ след ГМТЪгъл на гнездото на вентила - всмукателен клапан45°Ъгъл на гнездото на вентила - изпускателен клапан45°Диаметър на стъблото на вентила - всмукателен клапан7,960 - 7,970 ммДиаметър на стъблото на вентила - изпускателен клапан7,930 - 7,950 ммКоличество на нужните запалителни свещи/нагревателни свещи4Последователност на запалване1-3-4-2Позиция на 1.-цилиндърПо отношение на отдаващата мощност страна.
Налягане при сгъстяване22,0 - 28,0 barРазлика макс. 3 barСтепен на сгъстяване17,00 :1Максимално налягане при зареждане турбо/компресор0,90 barМинимално налягане на маслото при празен ход1,45 barОхладителна системаНалягане в охладителната система (налягане при отваряне капак на радиатора)0,74 - 1,03 barМинимална стойност 0,64 barТермостатът отваря при температура74° - 78°Система за горивоСистема за гориво общи сведенияВид на моторното горивоДизелОбработка на сместа обозначениеВпръскваща помпа на разпределителяОбработка на сместа производителNippon DensoВпръскващи дюзи производителKikiНалягане при впръскване дизел150 - 160 barКонтролни стойности за изгорелите газовеОбщи стойности, съществени за изгорелите газовеПоложение щепсел за диагнозаКонтактът за диагностика се намира от страната на водача, при краката под арматурното табло.Обороти на празен ход при скоростната кутия730 - 770 1/minОбороти на празен ход при автоматична скоростна кутия730 - 770 1/minМинимална температура на моторното масло при AU80 °CСтойности за изгорелите газове дизелово горивоОбороти, ограничавани от регулатора4800 - 5200 1/minМаксимална стойност K2,00 1/mДанни за ходовата частХодова част размериБаза2540 ммКоловоз предни колела1560 ммКоловоз задни колела1560 ммСпирачна уредбаИзмерения на спирачкатаДебелина на спирачния диск преден мост26,00 ммДебелина на спирачния диск граница на износване преден мост24,40 ммДебелина на спирачния диск заден мост22,00 ммДебелина на спирачния диск граница на износване заден мост20,40 ммДебелина на спирачната накладка преден мостбез задна пластина10,00 ммДебелина на спирачната накладка заден мостбез задна пластина10,00 ммДебелина на спирачната накладка граница на износване преден мостбез задна пластина2,00 ммДебелина на спирачната накладка граница на износване заден мостбез задна пластина2,00 ммКонсумативиКоличество запълващи вещества и спецификацииДвигателно масло с филтър9,80 литраВискозност моторно маслоAPI CD30W, 10W-30, 15W-40, 20W-50Спецификация двигателно маслоAPI CDМасло за скоростната кутияСкоростна кутия V5M313,20 литраСпецификация масло за скоростна кутияAPI GL4 SAE 75W-90Масло за автоматична скоростна кутияСкоростна кутия V5A519,30 литраСпецификация масло за автоматична скоростна кутияATF SP-IIIМасло на диференциала заден мост1,20 литраСпецификация масло за преден мостAPI GL5 SAE 80WДиференциално масло заден мост1,60 литраСпецификация масло за заден мостAPI GL5 SAE 80WМасло за разпределеителна скоростна кутияс автоматична скоростна кутия2,80 литраМасло за разпределеителна скоростна кутиясъс скоростна кутия2,50 литраСпецификация разпределителна предавателна кутияAPI GL4 SAE 75W-90Масло за сервоуправлението0,60 литраСпецификация масло за сервоуправлениетоATF Dexron IIАнтифриз9,00 литраАнтифризсъс задно отопление10,50 литраСпецификация охладителна течностОригинален антифризСпирачна течност при смяна1,20 литраСпецификация спирачна течностDOT 4Течност за съединителя0,00 литраНапълнете изравнителния резервоар - течност за съединителя до самата горна маркировка.Спецификация на течности за съединителяDOT 3|DOT 4Средства за охлаждане климатична инсталация530 - 570 грамаСредства за охлаждане климатична инсталацияс климатик в задната част на купето730 - 770 грамаСпецификация охлаждащи средстваR134aМасло климатична инсталация100 - 140 cm³Масло климатична инсталацияс климатик в задната част на купето120 - 160 cm³Спецификация охлаждащо маслоDenso ND - OIL 6ОсветлениеПредни фаровеКъси светлиниH4 12V 60/55W P43tДълги светлиниH4 12V 60/55W P43tСветлини за дневно каранеПринадлежащи артикулиDAY1ГабаритиW5W 12V 5W W2,1x9,5d LonglifeФарове за мъглаHB4 12V 51W P22dМигач преденW21W 12V 21W W3x16dМигач страниченот 2002/10 и нагореWY5W 12V 5W W2,1x9,5d yellowМигач страничендо 2002/09W5W 12V 5W W2,1x9,5dЗадни фаровеМигач заденбял мигачPY21W 12V 21W BAU15s yellowМигач заденжълт мигачP21W 12V 21W BA15sЗадна светлинадо 2002/09P21/5W 12V 21/5W BAY15dЗадна светлинаот 2002/10 и нагореW21/5W 12V 21/5W W3x16qСтопдо 2002/09P21/5W 12V 21/5W BAY15dСтопот 2002/10 и нагореW21/5W 12V 21/5W W3x16qСветлини за обратен ходW21W 12V 21W W3x16dЗадни фарове за мъглаW21W 12V 21W W3x16dОсветление на табелата с регистрационния номерW5W 12V 5W W2,1x9,5dДопълнителни стоповеW16W 12V 16W W2,1x9,5dВътрешни лампиВътрешно осветлениеFestoon 12V 8W SV8,5 (8,2x28)Лампа за врататаC5W 12V 5W SV8,5 (11x35)Лампа при качванеW5W 12V 5W W2,1x9,5dЛампа за четенеFestoon 12V 8W SV8,5 (8,2x28)Интервали за смянаЗа сервизни данниЛуфт на клапана - проверочен режим.на всеки 15.000 km / веднъж годишноИзбраното МПС е успешно добавено във вашия гараж. +
![ARP Custom Age 625+ 5/16" Connection Bolts with 1.5" lenghts ARP arp3006708 Mitsubishi Shogun (V60,V70) 3.2 DI-D (V68W, V78W)](images/arp-custom-age-625+-5/16"-connection-bolts-with-1.5"-lenghts-imageaplist-5243-3861780.jpg)
-
Огромен избор Над 800 000 авточасти
-
Купи на кредит с ТБИ Минимална сума 150 лв.
-
Експресна доставка Наложен платеж и преглед
-
14 дни срок Връщане или замяна
ТОП производители
