ARP болтове и шпилки Nissan за Nissan Juke 1.2 DIG-T - 115 коня бензин HRA2DDT - онлайн магазин
115 к.с - бензин
05.2014 - 12.2019
-
ARP 2000 5/16" connecting rod screws in 38.1mm length.
Universally applicable for all H-shank connecting rods.
ARP connecting rod bolts have been developed for the highest requirements and offer optimum safety.
The connecting rod bolts are heat treated and rolled, which gives them up to 10 times higher fatigue strength.
Especially for tuned engines highly recommended!
Connecting rod bearings best to replace directly with.A 3/8" nut should be used for installation.
More information on the correct tightening of the connecting rod bolts HERE
-
ARP 5/16 "rod bolts with 38,1mm in length.
Universally applicable for all H-Beam conrods .
ARP custom age 625 + have been developed for the highest requirements and provide optimum safety.
At high engine speed, it arrives at the Aufwertsbewegung the piston to high tensile forces acting on the connecting rod according to Kurbelwellenhub more or less.
To avoid this, a screw is recommended Pleulschraube tear as it has a tensile strength of 260-280 PSI, compared to having only a 2000 ARP Zugfestigkit of 220 PSI
The rod bolts are heat treated and rolled, giving them up to 10 times higher fatigue strength.
Especially for tuned engines highly recommended!
Best exchange directly connecting rod bearings.
(Price for one Bolt.)More information on how to properly tighten the connecting rod bolts
-
Digital High End Dial Indicator from ARP for measuring the extension of expansion screws.
When fitting connecting rod bolts, the tightening torque is only of secondary importance. Much more important is the extension of the screw.
This stretch can be measured accurately with the ARP dial gauge.
ARP has taken accuracy to the next level with the introduction of a digital stretch gauge that measures to the ten-thousandth (0.0001-inch).
Accurate readings are made by opposing ball and pin probes centered on the bolt. A uniquely designed aluminum handle facilitates operation.
ALWAYS fit and tighten connecting rod bolts with sufficient ARP Ultra Torque Paste!
For further information about assambling rod bolts correctly, click here
Here is our video on the correct installation of connecting rods and connecting rod bolts:
ARP strech gauge for a perfect conrod bolts assembly. If you want to torque your conrod bolts in a professional way you have to measure the strech and not the torque. This ARP gauge is individually adjustable to measure each kind of conrod bolts. Always use ARP ultra torque grease for conrod assembly.
Here is our video on the correct installation of connecting rods and connecting rod bolts:
"Spezial ARP ultra torque assembly lubricant for professional fittment of each kind of ARP bolts or studs.
All ARP bolts and studs threads should be thigthen up with this ARP Moly Assembly Lubricant called ultra torque to mentain correct torques specifications.
All ARP kit have this lubricant included.
"
"Spezial ARP ultra torque assembly lubricant for professional fittment of each kind of ARP bolts or studs.
All ARP bolts and studs threads should be thigthen up with this ARP Moly Assembly Lubricant called ultra torque to mentain correct torques specifications.
Big can (approx. 350 gramms) with brush included.
"
Main bolt for the vibration damper from the well-known US manufacturer ARP for the reinforcement of the vibration damper in the RB26 2.6L engine.
The screw has a higher clamping force and corresponds to the aviation standard. It is made of high-strength quality steel and can even be reused. Perfect for the highest tuning requirements!
Features of the ARP Master Bolt for the Vibration Damper:- 10% higher clamping force
- Meets the aviation standard
- grade steel
- Hardened
- reusable
- Plug and play
M10 x 1.25 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M10 x 1.25 x 20 20 mm n.a. M10 x 1.25 x 25 25 mm n.a. M10 x 1.25 x 30 30 mm n.a. M10 x 1.25 x 35 35 mm n.a. M10 x 1.25 x 40 26 mm 14 mm M10 x 1.25 x 45 26 mm 19 mm M10 x 1.25 x 50 26 mm 24 mm M10 x 1.25 x 60 26 mm 34 mm M10 x 1.25 x 70 26 mm 44 mm M10 x 1.25 x 80 26 mm 54 mm M10 x 1.25 x 90 26 mm 64 mm M10 x 1.25 x 100 26 mm 74 mm
M10 x 1.50 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M10 x 1.50 x 20 20 mm n.a. M10 x 1.50 x 25 25 mm n.a. M10 x 1.50 x 30 30 mm n.a. M10 x 1.50 x 35 35 mm n.a. M10 x 1.50 x 40 26 mm 14 mm M10 x 1.50 x 45 26 mm 19 mm M10 x 1.50 x 50 26 mm 24 mm M10 x 1.50 x 60 26 mm 34 mm M10 x 1.50 x 65 26 mm 39 mm M10 x 1.50 x 70 26 mm 44 mm M10 x 1.50 x 80 26 mm 54 mm M10 x 1.50 x 90 26 mm 64 mm M10 x 1.50 x 100 26 mm 74 mm
M12 x 1.50 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M12 x 1.50 x 25 25 mm n.a. M12 x 1.50 x 30 30 mm n.a. M12 x 1.50 x 35 30 mm 5 mm M12 x 1.50 x 40 30 mm 10 mm M12 x 1.50 x 45 30 mm 15 mm M12 x 1.50 x 50 30 mm 20 mm M12 x 1.50 x 60 30 mm 30 mm M12 x 1.50 x 70 30 mm 40 mm M12 x 1.50 x 80 30 mm 50 mm M12 x 1.50 x 90 30 mm 60 mm M12 x 1.50 x 100 30 mm 70 mm
M12 x 1.75 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M12 x 1.75 x 25 25 mm n.a. M12 x 1.75 x 30 30 mm n.a. M12 x 1.75 x 35 30 mm 5 mm M12 x 1.75 x 40 30 mm 10 mm M12 x 1.75 x 45 30 mm 15 mm M12 x 1.75 x 50 30 mm 20 mm M12 x 1.75 x 60 30 mm 30 mm M12 x 1.75 x 70 30 mm 40 mm M12 x 1.75 x 80 30 mm 50 mm M12 x 1.75 x 90 30 mm 60 mm M12 x 1.75 x 100 30 mm 70 mm
M6 x 1.00 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M6 x 1.00 x 12 12 mm n.a. M6 x 1.00 x 16 16 mm n.a. M6 x 1.00 x 20 20 mm n.a. M6 x 1.00 x 25 25 mm n.a. M6 x 1.00 x 30 18 mm 12 mm M6 x 1.00 x 35 18 mm 17 mm M6 x 1.00 x 40 18 mm 22 mm M6 x 1.00 x 45 18 mm 27 mm M6 x 1.00 x 50 18 mm 32 mm M6 x 1.00 x 55 18 mm 37 mm M6 x 1.00 x 60 18 mm 42 mm M6 x 1.00 x 65 18 mm 47 mm M6 x 1.00 x 70 18 mm 52 mm M6 x 1.00 x 75 18 mm 57 mm M6 x 1.00 x 80 18 mm 62 mm M6 x 1.00 x 90 18 mm 72 mm M6 x 1.00 x 100 18 mm 82 mm M6 x 1.00 x 135 18 mm 117 mm
M8 x 1.25 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M8 x 1.25 x 12 12 mm n.a. M8 x 1.25 x 16 16 mm n.a. M8 x 1.25 x 20 20 mm n.a. M8 x 1.25 x 25 25 mm n.a. M8 x 1.25 x 30 22 mm 8 mm M8 x 1.25 x 35 22 mm 13 mm M8 x 1.25 x 40 22 mm 18 mm M8 x 1.25 x 45 22 mm 23 mm M8 x 1.25 x 50 22 mm 28 mm M8 x 1.25 x 55 22 mm 33 mm M8 x 1.25 x 60 22 mm 38 mm M8 x 1.25 x 65 22 mm 43 mm M8 x 1.25 x 70 22 mm 48 mm M8 x 1.25 x 75 22 mm 53 mm M8 x 1.25 x 80 22 mm 58 mm M8 x 1.25 x 85 22 mm 63 mm M8 x 1.25 x 90 22 mm 68 mm M8 x 1.25 x 100 22 mm 78 mm
ARP Conrod bolt kit for Nissan 2.0L (SR20DE/DET) 11/32".
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
ARP Main Stud Kit for NISSAN/DATSUN 2.0L (SR20DE/DET).
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP conrod bolt set for Nissan/Datsun 2.4L (KA24DE) 11/32".
Forged from high-strength chrome moly steel with 200,000 psi tensile strength nearly twice as strong as the best factory OEM stock bolts.
- Perfectly rolled threads are virtually indestructible with the material used.
- These bolts are especially recommended for tuned engines.
ARP - world leader in the field of engine bolts produces top quality products of unparalleled quality, unsurpassed strength and forged to the nanometer.
ARP Head Stud Kit for NISSAN/DATSUN 2.6L RB25DETT GT-R inline 6, ARP2000.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- -Fully reusable.
12pt Head Stud Kit for NISSAN 240SX ARP.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Main Stud Kit for NISSAN/DATSUN 3.5L (VQ35) DOHC V6.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
(Click on the PDF box to download instruction)
ARP 12pt Head Stud Kit for NISSAN/DATSUN A-12 Engines.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Conrod bolt kit for Nissan/Datsun A-Series (A12-A12A-A13-A14-A15).
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
ARP MAIN (crank) Stud Kit for NISSAN/DATSUN 1.6L & 1.8L, Nissan CA16&18DE, CA16&18DET.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP HEAD Stud Kit for NISSAN/DATSUN 1.6L & 1.8L, Nissan CA16&18DE, CA16&18DET.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for NISSAN VR38DETT V6 CA625+
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Main Stud Kit for NISSAN/DATSUN 3,8L VR38 (GTR 2008-UP).
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP 12pt Head Stud Kit for NISSAN/DATSUN L20 Serie 4 cylinder.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Conrod bolt kit for Nissan/Datsun L20 Series 4 cylinder & 2.2L (Z22) M9.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
ARP Main Stud Kit for NISSAN/DATSUN L20 Serie 4-cylinder.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
-Due to advanced manufacturing processes ARP studs reach highest strength and stability.
-Tensile strength of 200.000 psi (13,8t/cm²).
-Absolutely perfectly round and straight studs for a first-class assembly.
-All kits come with ARP hardened washers and high quality nuts.
-Harder, more durable, stable, and processed better than any OEM products.
-10 times stronger threads than the competetive products by thread cut after curing.
-Highest ARP quality product for professional use.
-Fully reusable.
(Click on the PDF box to download instruction)
ARP conrod Bolt set for Nissan L24 series (early) inline6 M8.
Forged from high-strength chrome moly steel with 200,000 psi tensile strength nearly twice as strong as the best factory OEM series bolts.
- Perfectly rolled threads are virtually indestructible with the material used.
- These bolts are especially recommended for tuned engines.
ARP - world leader in the field of engine bolts produces top quality products of unparalleled quality, unsurpassed strength and forged to the nanometer.
ARP Main Stud Kit for NISSAN/DATSUN L24, L26 & L28 Serie 6-cylinder.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for NISSAN/DATSUN L24, L26, L28 Serie 6 cylinder.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for NISSAN/DATSUN 2.0L DOHC Turbo (1991-01) GTiR DET M12.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for NISSAN/DATSUN 2.0L & 2.5L RB20, RB20DET, RB25, RB25DET inline 6.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Main Stud Kit for NISSAN/DATSUN RB26 6 cylinder.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Conrod bolt kit for Nissan/Datsun 2.6L (RB26DET/DETT) inline6 11/32".
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
ARP Stehbolzen Kit Zylinderkopf for NISSAN/DATSUN Sentra SR20 & SR20DET 2.0.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for NISSAN/DATSUN 3.0L & 3,5L DOHC V6, NISSAN VQ30 + VQ35 12pt.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Conrod bolt kit for Nissan VQ35.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
(Click on the PDF box to download instruction)
ARP 12pt Head Stud Kit for NISSAN/DATSUN A-14 Engines.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Flywheel bolt kit for Opel/Vauxhall 2.0L 16V.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.- Perfectly crafted rolled threads from indestructible material.
- These bolts are ideal for tuned engines and are highly recommended by higher tourqe.
- Set of 8 pcs of high-strenght bolts
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
Single nut for all ARP studs. Should you ever lose one, no problem.
- 100% reusable
- Stainless
- Extremely temperature resistant
Price for a nut with a washer
Single nut in our high boost version for almost all stud bolt from ARP. Should you ever lose or damage one, no problem.
- 100% reusable
- stainless
- extremely temperature resistant
Price for one nut.
Spezial tool to fit ARP studs in the Cylinder head.
Some kits from ARP may include this tool, but we just sell it always seperately. This makes the kits much more cheaper in the end.
This tool is needed for the 1.8T engine.
Internal multi-tooth socket for mounting ARP nuts and bolts.
12 square socket with 1/2 inch drive for tightening ARP nuts. This ARP tool is available in different sizes and is needed for the assembly of all ARP stud bolt and screws.
Available in the following sizes: 8-20mm
Спирачна системаСпирачна система - Nissan Juke 1.2 DIG-TЗатвориОкачване на колелатаОкачване на колелата - Nissan Juke 1.2 DIG-TЗатвориКормилна системаКормилна система - Nissan Juke 1.2 DIG-TЗатвориЗадвижване на колелатаЗадвижване на колелата - Nissan Juke 1.2 DIG-TЗатвориТрансмисияТрансмисия - Nissan Juke 1.2 DIG-TЗатвориРемъчно задвижванеРемъчно задвижване - Nissan Juke 1.2 DIG-TЗатвориЧасти за двигателЧасти за двигател - Nissan Juke 1.2 DIG-TЗатвориЧасти за цилиндров блокЧасти за цилиндров блок - Nissan Juke 1.2 DIG-TЗатвориГарнитуриГарнитури - Nissan Juke 1.2 DIG-TЗатвориОхладителна системаОхладителна система - Nissan Juke 1.2 DIG-TЗатвориКлиматична системаКлиматична система - Nissan Juke 1.2 DIG-TЗатвориОтопление и вентилацияОтопление и вентилация - Nissan Juke 1.2 DIG-TЗатвориФилтриФилтри - Nissan Juke 1.2 DIG-TЗатвориМасла и течностиМасла и течности - Nissan Juke 1.2 DIG-TЗатвориЗапалителна системаЗапалителна система - Nissan Juke 1.2 DIG-TЗатвориДатчици и сензориДатчици и сензори - Nissan Juke 1.2 DIG-TЗатвориГоривна системаГоривна система - Nissan Juke 1.2 DIG-TЗатвориЕлектрическа системаЕлектрическа система - Nissan Juke 1.2 DIG-TЗатвориСтартова системаСтартова система - Nissan Juke 1.2 DIG-TЗатвориПочистване на стъклатаПочистване на стъклата - Nissan Juke 1.2 DIG-TЗатвориАуспуси и гърнетаАуспуси и гърнета - Nissan Juke 1.2 DIG-TЗатвориЕдрогабаритни частиЕдрогабаритни части - Nissan Juke 1.2 DIG-TЗатвориСветлиниСветлини - Nissan Juke 1.2 DIG-TЗатвориИнтериорИнтериор - Nissan Juke 1.2 DIG-TЗатвориДобавкиДобавки - Nissan Juke 1.2 DIG-TЗатвориТунингТунинг - Nissan Juke 1.2 DIG-TЗатвориАвтоаксесоариАвтоаксесоари - Nissan Juke 1.2 DIG-TЗатвориЗадължително оборудванеЗадължително оборудване - Nissan Juke 1.2 DIG-TЗатвориИнструментиИнструменти - Nissan Juke 1.2 DIG-TЗатвориТехнически характеристики
Общи данни
Запалителна система
Консумативи
Осветление
Интервали за смянаОбщи данниОбщи сведения основни стойностиВид на управлението на двигателяАнгренажна веригаХод73,10 ммВътрешен диаметър на цилиндъра72,20 ммЛуфт на вентила - всмукателен клапан0,25 - 0,35 ммЛуфт на вентила - изпускателен клапан0,46 - 0,54 ммДиаметър на стъблото на вентила - всмукателен клапан5,475 - 5,485 ммДиаметър на стъблото на вентила - изпускателен клапан5,455 - 5,470 ммКоличество на нужните запалителни свещи/нагревателни свещи4Последователност на запалване1-3-4-2Степен на сгъстяване10,10 :1Охладителна системаТермостатът отваря при температура77° - 80°Запалителна системаЗапалителна система стойностиРазстояние между електродите0,65 ммЗапалителни свещи/нагревателни свещи NGKILKAR7F7GКонсумативиКоличество запълващи вещества и спецификацииДвигателно масло с филтърКоличество за смяна4,63 литраДвигателно масло с филтърНово запълване5,60 литраВискозност моторно маслоACEA A3/B40W-30, 0W-40, 5W-30, 5W-40, 5W-50, 10W-40, 10W-60, 15W-40Спецификация двигателно маслоACEA A3/B4Масло за скоростната кутияСкоростна кутия RS6F94R2,00 литраСпецификация масло за скоростна кутияAPI GL4 SAE 75W-80Антифриз7,60 литраСпецификация охладителна течностOriginal FrostschutzmittelСпирачна течност при смяна1,00 литраСпецификация спирачна течностDOT 4ОсветлениеПредни фаровеКъси светлинидо 2014/04H4 12V 60/55W P43t
Къси светлиниот 2014/05 и нагоре, с халогенни фаровеH11 12V 55W PGJ19-2Къси светлиниот 2014/05 и нагоре, с ксенонови фаровеD2S 85V 35W P32d-2Дълги светлинидо 2014/04H4 12V 60/55W P43tДълги светлиниот 2014/05 и нагореHB3 12V 65W P20dСветлини за дневно каранеот 2014/05 и нагореLEDОригинален детайлСветлини за дневно каранеПринадлежащи артикулиDAY1Габаритидо 2014/04W5W 12V 5W W2,1x9,5d LonglifeГабаритиот 2014/05 и нагореLEDОригинален детайлФарове за мъгладо 2014/04H8 12V 35W PGJ19-1Фарове за мъглаот 2014/05 и нагореH11 12V 55W PGJ19-2Мигач предендо 2014/04PY21W 12V 21W BAU15s yellowМигач преденот 2014/05 и нагореWY21W 12V 21W WX3x16d yellowМигач страничендо 2014/04WY5W 12V 5W W2,1x9,5d yellowМигач страниченот 2014/05 и нагореLEDОригинален детайлЗадни фаровеМигач задендо 2014/04W21W 12V 21W W3x16dМигач заденот 2014/05 и нагореWY21W 12V 21W WX3x16d yellowЗадна светлинадо 2014/04W21/5W 12V 21/5W W3x16qЗадна светлинаот 2014/05 и нагореLEDОригинален детайлСтопW21/5W 12V 21/5W W3x16qСветлини за обратен ходW16W 12V 16W W2,1x9,5dЗадни фарове за мъглаW21W 12V 21W W3x16dОсветление на табелата с регистрационния номерW5W 12V 5W W2,1x9,5dДопълнителни стоповеLEDОригинален детайлВътрешни лампиВътрешно осветление>Оригинален детайлЛампа в багажникаC5W 12V 5W SV8,5 (11x35)Лампа за четенеW5W 12V 5W W2,1x9,5dИнтервали за смянаЗа сервизни данниУправляваща верига интервал за смянавсички 300.000 kmАгрегатен ремък интервал за смянана всеки 80.000 km / 4 годиниНаправляващата ролка - агрегатен ремък интервал за смянана всеки 80.000 km / 4 годиниОбтяжна ролка - агрегатен ремък интервал за смянана всеки 80.000 km / 4 годиниВъздушен филтър интервал за смянана всеки 60.000 km / 3 годиниЗапалителни свещи интервал за смянас иридийни запалителни свещина всеки 80.000 km / 4 годиниСпирачна течност интервал за смянана всеки 40.000 km / 2 годиниОхлаждащи средства за двигателя интервал за смянапърво на 100.000 km / 5 години, след това всяка 60.000 km / 4 годинаМоторно масло и филтър интервал за смянана всяка 20.000 km / 1 годинаФилтър купе интервал за смянана всеки 40.000 km / 2 годиниИзбраното МПС е успешно добавено във вашия гараж. +Alfa Romeo 147 (937) Hatchback 2.0 16V T.SPARK (937.AXA1, 937.AXC1, 937.BXC1) - 150 коня Въведете рама
Запази
Ford Transit BUS (FD,FB,FS,FZ,FC) 2.4 TDE (F_C_, F_B_, F_A_) - 125 коня Въведете рама
Запази
Iveco Daily 4 Platform 65C14 G, 65C14 G/P, 65C14 GD, 65C14 GD/P - 136 коня Въведете рама
Запази
Renault Master 3 Box (FV) 2.3 dCi 145 FWD (FV0E, FV0F, FV0H, FV02, FV0M, FV0S,... - 146 коня Въведете рама
Запази
Iveco Eurocargo 1-2-3 80 E 18 tector, 80 E 18 P tector, 80 E 18 FP tector - 177 коня Въведете рама Запази
![ARP Custom Age 625+ 5/16" Connection Bolts with 1.5" lenghts ARP arp3006708 Nissan Juke 1.2 DIG-T](images/arp-custom-age-625+-5/16"-connection-bolts-with-1.5"-lenghts-imageaplist-5243-3861780.jpg)
![Nissan 2.0L (SR20DE/DET) 11/32" conrod-Bolt Set ARP 202-6005 Nissan Juke 1.2 DIG-T](images/nissan-2.0l-sr20de/det-11/32"-conrod-bolt-set-imageaplist-5251-3861884.jpg)
![Nissan 2.4L KA24DE 11/32" conrod-bolts set ARP 102-6003 Nissan Juke 1.2 DIG-T](images/nissan-2.4l-ka24de-11/32"-conrod-bolts-set-imageaplist-5251-3861886.jpg)
Запази
Запази
Запази
Запази
Запази
Запази
Запази
Запази
Запази
Запази
Запази
Запази
Запази
Запази
Запази
Запази
Запази
Запази
Запази
Запази
Запази
Запази
ЗапазиПоследно разгледани
-
ремонтен комплект стъклоповдигач BLIC
6205-05-013824P
-
Зарядно устройство за акумулатор CTEK
40-310
-
Кора под двигател STARLINE
20.62.345
-
Комплект гарнитури ангренажен капак ELRING
597.490
-
Динамометричен ключ въртящ момент 190Nm-190Nm дълж TOPTUL
ANAC1614
-
Накрайници AMG за Mercedes CLA W117,C117, A класа AP
BZ52020-11L/R
-
Хидравличен филтър кормилна уредба CLEAN FILTERS
ML 026
-
Жило за ръчна спирачка BLUE PRINT
ADS74624
-
ключ(бутон), стъклоповдигане METZGER
09161110
-
КОМПЛЕКТ ЧИСТАЧКИ Е90 /Е91 BMW OE
61612455439
-
Накрайник за ауспух ULTER-SPORT
ULT N1-90RS* P/55
-
Комплект спирачни челюсти JAPANPARTS
GF-117AF
-
Спрей за контакти и електроника BARDAHL
BAR-4459
-
крушка с нагреваема жичка, мигачи VALEO
032107
-
Горна помпа за съединител BREMBO
C 85 002
-
Огромен избор Над 800 000 авточасти
-
Купи на кредит с ТБИ Минимална сума 150 лв.
-
Експресна доставка Наложен платеж и преглед
-
14 дни срок Връщане или замяна
ТОП производители
