ARP болтове и шпилки Nissan за Nissan Primera Traveller (WP11) 2.0 16V - 140 коня бензин SR20DE - онлайн магазин
140 к.с - бензин
08.1999 - 12.2001
-
ARP 2000 5/16" connecting rod screws in 38.1mm length.
Universally applicable for all H-shank connecting rods.
ARP connecting rod bolts have been developed for the highest requirements and offer optimum safety.
The connecting rod bolts are heat treated and rolled, which gives them up to 10 times higher fatigue strength.
Especially for tuned engines highly recommended!
Connecting rod bearings best to replace directly with.A 3/8" nut should be used for installation.
More information on the correct tightening of the connecting rod bolts HERE
-
ARP 5/16 "rod bolts with 38,1mm in length.
Universally applicable for all H-Beam conrods .
ARP custom age 625 + have been developed for the highest requirements and provide optimum safety.
At high engine speed, it arrives at the Aufwertsbewegung the piston to high tensile forces acting on the connecting rod according to Kurbelwellenhub more or less.
To avoid this, a screw is recommended Pleulschraube tear as it has a tensile strength of 260-280 PSI, compared to having only a 2000 ARP Zugfestigkit of 220 PSI
The rod bolts are heat treated and rolled, giving them up to 10 times higher fatigue strength.
Especially for tuned engines highly recommended!
Best exchange directly connecting rod bearings.
(Price for one Bolt.)More information on how to properly tighten the connecting rod bolts
-
Digital High End Dial Indicator from ARP for measuring the extension of expansion screws.
When fitting connecting rod bolts, the tightening torque is only of secondary importance. Much more important is the extension of the screw.
This stretch can be measured accurately with the ARP dial gauge.
ARP has taken accuracy to the next level with the introduction of a digital stretch gauge that measures to the ten-thousandth (0.0001-inch).
Accurate readings are made by opposing ball and pin probes centered on the bolt. A uniquely designed aluminum handle facilitates operation.
ALWAYS fit and tighten connecting rod bolts with sufficient ARP Ultra Torque Paste!
For further information about assambling rod bolts correctly, click here
Here is our video on the correct installation of connecting rods and connecting rod bolts:
ARP strech gauge for a perfect conrod bolts assembly. If you want to torque your conrod bolts in a professional way you have to measure the strech and not the torque. This ARP gauge is individually adjustable to measure each kind of conrod bolts. Always use ARP ultra torque grease for conrod assembly.
Here is our video on the correct installation of connecting rods and connecting rod bolts:
"Spezial ARP ultra torque assembly lubricant for professional fittment of each kind of ARP bolts or studs.
All ARP bolts and studs threads should be thigthen up with this ARP Moly Assembly Lubricant called ultra torque to mentain correct torques specifications.
All ARP kit have this lubricant included.
""Spezial ARP ultra torque assembly lubricant for professional fittment of each kind of ARP bolts or studs.
All ARP bolts and studs threads should be thigthen up with this ARP Moly Assembly Lubricant called ultra torque to mentain correct torques specifications.
Big can (approx. 350 gramms) with brush included.
"Main bolt for the vibration damper from the well-known US manufacturer ARP for the reinforcement of the vibration damper in the RB26 2.6L engine.
The screw has a higher clamping force and corresponds to the aviation standard. It is made of high-strength quality steel and can even be reused. Perfect for the highest tuning requirements!
Features of the ARP Master Bolt for the Vibration Damper:- 10% higher clamping force
- Meets the aviation standard
- grade steel
- Hardened
- reusable
- Plug and play
M10 x 1.25 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M10 x 1.25 x 20 20 mm n.a. M10 x 1.25 x 25 25 mm n.a. M10 x 1.25 x 30 30 mm n.a. M10 x 1.25 x 35 35 mm n.a. M10 x 1.25 x 40 26 mm 14 mm M10 x 1.25 x 45 26 mm 19 mm M10 x 1.25 x 50 26 mm 24 mm M10 x 1.25 x 60 26 mm 34 mm M10 x 1.25 x 70 26 mm 44 mm M10 x 1.25 x 80 26 mm 54 mm M10 x 1.25 x 90 26 mm 64 mm M10 x 1.25 x 100 26 mm 74 mm M10 x 1.50 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M10 x 1.50 x 20 20 mm n.a. M10 x 1.50 x 25 25 mm n.a. M10 x 1.50 x 30 30 mm n.a. M10 x 1.50 x 35 35 mm n.a. M10 x 1.50 x 40 26 mm 14 mm M10 x 1.50 x 45 26 mm 19 mm M10 x 1.50 x 50 26 mm 24 mm M10 x 1.50 x 60 26 mm 34 mm M10 x 1.50 x 65 26 mm 39 mm M10 x 1.50 x 70 26 mm 44 mm M10 x 1.50 x 80 26 mm 54 mm M10 x 1.50 x 90 26 mm 64 mm M10 x 1.50 x 100 26 mm 74 mm M12 x 1.50 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M12 x 1.50 x 25 25 mm n.a. M12 x 1.50 x 30 30 mm n.a. M12 x 1.50 x 35 30 mm 5 mm M12 x 1.50 x 40 30 mm 10 mm M12 x 1.50 x 45 30 mm 15 mm M12 x 1.50 x 50 30 mm 20 mm M12 x 1.50 x 60 30 mm 30 mm M12 x 1.50 x 70 30 mm 40 mm M12 x 1.50 x 80 30 mm 50 mm M12 x 1.50 x 90 30 mm 60 mm M12 x 1.50 x 100 30 mm 70 mm M12 x 1.75 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M12 x 1.75 x 25 25 mm n.a. M12 x 1.75 x 30 30 mm n.a. M12 x 1.75 x 35 30 mm 5 mm M12 x 1.75 x 40 30 mm 10 mm M12 x 1.75 x 45 30 mm 15 mm M12 x 1.75 x 50 30 mm 20 mm M12 x 1.75 x 60 30 mm 30 mm M12 x 1.75 x 70 30 mm 40 mm M12 x 1.75 x 80 30 mm 50 mm M12 x 1.75 x 90 30 mm 60 mm M12 x 1.75 x 100 30 mm 70 mm M6 x 1.00 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M6 x 1.00 x 12 12 mm n.a. M6 x 1.00 x 16 16 mm n.a. M6 x 1.00 x 20 20 mm n.a. M6 x 1.00 x 25 25 mm n.a. M6 x 1.00 x 30 18 mm 12 mm M6 x 1.00 x 35 18 mm 17 mm M6 x 1.00 x 40 18 mm 22 mm M6 x 1.00 x 45 18 mm 27 mm M6 x 1.00 x 50 18 mm 32 mm M6 x 1.00 x 55 18 mm 37 mm M6 x 1.00 x 60 18 mm 42 mm M6 x 1.00 x 65 18 mm 47 mm M6 x 1.00 x 70 18 mm 52 mm M6 x 1.00 x 75 18 mm 57 mm M6 x 1.00 x 80 18 mm 62 mm M6 x 1.00 x 90 18 mm 72 mm M6 x 1.00 x 100 18 mm 82 mm M6 x 1.00 x 135 18 mm 117 mm M8 x 1.25 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M8 x 1.25 x 12 12 mm n.a. M8 x 1.25 x 16 16 mm n.a. M8 x 1.25 x 20 20 mm n.a. M8 x 1.25 x 25 25 mm n.a. M8 x 1.25 x 30 22 mm 8 mm M8 x 1.25 x 35 22 mm 13 mm M8 x 1.25 x 40 22 mm 18 mm M8 x 1.25 x 45 22 mm 23 mm M8 x 1.25 x 50 22 mm 28 mm M8 x 1.25 x 55 22 mm 33 mm M8 x 1.25 x 60 22 mm 38 mm M8 x 1.25 x 65 22 mm 43 mm M8 x 1.25 x 70 22 mm 48 mm M8 x 1.25 x 75 22 mm 53 mm M8 x 1.25 x 80 22 mm 58 mm M8 x 1.25 x 85 22 mm 63 mm M8 x 1.25 x 90 22 mm 68 mm M8 x 1.25 x 100 22 mm 78 mm ARP Conrod bolt kit for Nissan 2.0L (SR20DE/DET) 11/32".
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.ARP Main Stud Kit for NISSAN/DATSUN 2.0L (SR20DE/DET).
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP conrod bolt set for Nissan/Datsun 2.4L (KA24DE) 11/32".
Forged from high-strength chrome moly steel with 200,000 psi tensile strength nearly twice as strong as the best factory OEM stock bolts.
- Perfectly rolled threads are virtually indestructible with the material used.
- These bolts are especially recommended for tuned engines.
ARP - world leader in the field of engine bolts produces top quality products of unparalleled quality, unsurpassed strength and forged to the nanometer.ARP Head Stud Kit for NISSAN/DATSUN 2.6L RB25DETT GT-R inline 6, ARP2000.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- -Fully reusable.
12pt Head Stud Kit for NISSAN 240SX ARP.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Main Stud Kit for NISSAN/DATSUN 3.5L (VQ35) DOHC V6.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
(Click on the PDF box to download instruction)ARP 12pt Head Stud Kit for NISSAN/DATSUN A-12 Engines.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Conrod bolt kit for Nissan/Datsun A-Series (A12-A12A-A13-A14-A15).
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.ARP MAIN (crank) Stud Kit for NISSAN/DATSUN 1.6L & 1.8L, Nissan CA16&18DE, CA16&18DET.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP HEAD Stud Kit for NISSAN/DATSUN 1.6L & 1.8L, Nissan CA16&18DE, CA16&18DET.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for NISSAN VR38DETT V6 CA625+
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Main Stud Kit for NISSAN/DATSUN 3,8L VR38 (GTR 2008-UP).
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP 12pt Head Stud Kit for NISSAN/DATSUN L20 Serie 4 cylinder.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Conrod bolt kit for Nissan/Datsun L20 Series 4 cylinder & 2.2L (Z22) M9.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.ARP Main Stud Kit for NISSAN/DATSUN L20 Serie 4-cylinder.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
-Due to advanced manufacturing processes ARP studs reach highest strength and stability.
-Tensile strength of 200.000 psi (13,8t/cm²).
-Absolutely perfectly round and straight studs for a first-class assembly.
-All kits come with ARP hardened washers and high quality nuts.
-Harder, more durable, stable, and processed better than any OEM products.
-10 times stronger threads than the competetive products by thread cut after curing.
-Highest ARP quality product for professional use.
-Fully reusable.
(Click on the PDF box to download instruction)ARP conrod Bolt set for Nissan L24 series (early) inline6 M8.
Forged from high-strength chrome moly steel with 200,000 psi tensile strength nearly twice as strong as the best factory OEM series bolts.
- Perfectly rolled threads are virtually indestructible with the material used.
- These bolts are especially recommended for tuned engines.
ARP - world leader in the field of engine bolts produces top quality products of unparalleled quality, unsurpassed strength and forged to the nanometer.
ARP Main Stud Kit for NISSAN/DATSUN L24, L26 & L28 Serie 6-cylinder.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for NISSAN/DATSUN L24, L26, L28 Serie 6 cylinder.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for NISSAN/DATSUN 2.0L DOHC Turbo (1991-01) GTiR DET M12.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for NISSAN/DATSUN 2.0L & 2.5L RB20, RB20DET, RB25, RB25DET inline 6.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Main Stud Kit for NISSAN/DATSUN RB26 6 cylinder.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Conrod bolt kit for Nissan/Datsun 2.6L (RB26DET/DETT) inline6 11/32".
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.ARP Stehbolzen Kit Zylinderkopf for NISSAN/DATSUN Sentra SR20 & SR20DET 2.0.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for NISSAN/DATSUN 3.0L & 3,5L DOHC V6, NISSAN VQ30 + VQ35 12pt.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Conrod bolt kit for Nissan VQ35.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
(Click on the PDF box to download instruction)ARP 12pt Head Stud Kit for NISSAN/DATSUN A-14 Engines.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Flywheel bolt kit for Opel/Vauxhall 2.0L 16V.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.- Perfectly crafted rolled threads from indestructible material.
- These bolts are ideal for tuned engines and are highly recommended by higher tourqe.
- Set of 8 pcs of high-strenght bolts
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
Single nut for all ARP studs. Should you ever lose one, no problem.
- 100% reusable
- Stainless
- Extremely temperature resistant
Price for a nut with a washer
Single nut in our high boost version for almost all stud bolt from ARP. Should you ever lose or damage one, no problem.
- 100% reusable
- stainless
- extremely temperature resistant
Price for one nut.
Spezial tool to fit ARP studs in the Cylinder head.
Some kits from ARP may include this tool, but we just sell it always seperately. This makes the kits much more cheaper in the end.
This tool is needed for the 1.8T engine.Internal multi-tooth socket for mounting ARP nuts and bolts.
12 square socket with 1/2 inch drive for tightening ARP nuts. This ARP tool is available in different sizes and is needed for the assembly of all ARP stud bolt and screws.
Available in the following sizes: 8-20mm
Спирачна система - Nissan Primera Traveller (WP11) 2.0 16VЗатвориОкачване на колелата - Nissan Primera Traveller (WP11) 2.0 16VЗатвориКормилна система - Nissan Primera Traveller (WP11) 2.0 16VЗатвориЗадвижване на колелата - Nissan Primera Traveller (WP11) 2.0 16VЗатвориТрансмисия - Nissan Primera Traveller (WP11) 2.0 16VЗатвориРемъчно задвижване - Nissan Primera Traveller (WP11) 2.0 16VЗатвориЧасти за двигател - Nissan Primera Traveller (WP11) 2.0 16VЗатвориЧасти за цилиндров блок - Nissan Primera Traveller (WP11) 2.0 16VЗатвориГарнитури - Nissan Primera Traveller (WP11) 2.0 16VЗатвориОхладителна система - Nissan Primera Traveller (WP11) 2.0 16VЗатвориКлиматична система - Nissan Primera Traveller (WP11) 2.0 16VЗатвориФилтри - Nissan Primera Traveller (WP11) 2.0 16VЗатвориМасла и течности - Nissan Primera Traveller (WP11) 2.0 16VЗатвориЗапалителна система - Nissan Primera Traveller (WP11) 2.0 16VЗатвориДатчици и сензори - Nissan Primera Traveller (WP11) 2.0 16VЗатвориГоривна система - Nissan Primera Traveller (WP11) 2.0 16VЗатвориЕлектрическа система - Nissan Primera Traveller (WP11) 2.0 16VЗатвориСтартова система - Nissan Primera Traveller (WP11) 2.0 16VЗатвориПочистване на стъклата - Nissan Primera Traveller (WP11) 2.0 16VЗатвориАуспуси и гърнета - Nissan Primera Traveller (WP11) 2.0 16VЗатвориЕдрогабаритни части - Nissan Primera Traveller (WP11) 2.0 16VЗатвориСветлини - Nissan Primera Traveller (WP11) 2.0 16VЗатвориИнтериор - Nissan Primera Traveller (WP11) 2.0 16VЗатвориДобавки - Nissan Primera Traveller (WP11) 2.0 16VЗатвориТунинг - Nissan Primera Traveller (WP11) 2.0 16VЗатвориАвтоаксесоари - Nissan Primera Traveller (WP11) 2.0 16VЗатвориЗадължително оборудване - Nissan Primera Traveller (WP11) 2.0 16VЗатвориИнструменти - Nissan Primera Traveller (WP11) 2.0 16VЗатвориТехнически характеристикиОбщи данниОбщи сведения основни стойностиВид на управлението на двигателяАнгренажна веригаОбороти при макс. мощност5800 1/minОбороти при макс. въртящ момент4800 1/minМаксимален въртящ момент181 NmХод86,00 ммВътрешен диаметър на цилиндъра86,00 ммВентили за един цилиндър4Компенсация на луфта на вентилаХидроповдигачЪгъл на гнездото на вентила - всмукателен клапан45°Ъгъл на гнездото на вентила - изпускателен клапан45°Диаметър на стъблото на вентила - всмукателен клапан5,960 - 5,980 ммДиаметър на стъблото на вентила - изпускателен клапан5,940 - 5,960 ммКоличество на нужните запалителни свещи/нагревателни свещи4Последователност на запалване1-3-4-2Налягане при сгъстяване10,80 - 12,80 barРазлика макс. 0,98 barСтепен на сгъстяване10,00 :1Минимално налягане на маслото при празен ход0,78 barМаксимално забавяне глава на цилиндъра0,100 ммМинимална височина на цилиндричната глава136,90 ммОхладителна системаНалягане в охладителната система (налягане при отваряне капак на радиатора)0,78 - 0,98 barМинимална стойност 0,59 barТермостатът отваря при температура82°Запалителна системаЗапалителна система стойностиМомент на запалване-15°00'±2°00' - преди ГМТ + след ГМТСистема за горивоСистема за гориво общи сведенияВид на моторното горивоOTTO 95 ROZОбработка на сместа обозначениеВпръскване на бензинОбработка на сместа типECCSНалягане на системата2,50 - 3,00 barКонтролни стойности за изгорелите газовеОбщи стойности, съществени за изгорелите газовеПоложение щепсел за диагнозаОбороти на празен ход при скоростната кутия700 - 800 1/minОбороти на празен ход при автоматична скоростна кутия700 - 800 1/minМинимална температура на моторното масло при AU85 °CСтойности за изгорелите газове бензинМомент на запалване-15°00'±2°00' - преди ГМТ + след ГМТСъдържание на CO-при празен ход0,50 %Повишени обороти при празен ход2800 - 3200 1/minСъдържание на CO-при повишен празен ход0,30 %Максимално съдържание на HC-при празен ход100 ppmСтойност ламбда0,97 - 1,03 λДанни за ходовата частДжанти и гумиНалягане при пълнене на гумите отпред185/65 R 152,00 barНалягане при пълнене на гумите отзад185/65 R 152,30 barСпирачна уредбаИзмерения на спирачкатаДебелина на спирачния диск преден мост22,00 ммДебелина на спирачния диск граница на износване преден мост20,00 ммМаксимално странично биене на спирачния диск преден мост0,07 ммДебелина на спирачния диск заден мост10,00 ммДебелина на спирачния диск граница на износване заден мост9,00 ммМаксимално странично биене на спирачния диск заден мост0,07 ммДебелина на спирачната накладка преден мостбез задна пластина11,00 ммДебелина на спирачната накладка заден мостбез задна пластина9,30 ммДебелина на спирачната накладка граница на износване преден мостбез задна пластина2,00 ммДебелина на спирачната накладка граница на износване заден мостбез задна пластина2,00 ммЕлектроникаОбщи сведения за електрическата частНапрежение на акумулатора12 волтаНапрежение на регулатора14,10 - 14,70 волтаКонсумативиКоличество запълващи вещества и спецификацииДвигателно масло с филтър3,70 литраВискозност моторно маслоACEA A3/B30W-40, 5W-30, 5W-40, 10W-40, 10W-60, 15W-40Спецификация двигателно маслоACEA A3/B3Масло за скоростната кутияСкоростна кутия RS5F32A3,70 литраДанни на производителя 3,6 - 3,8 литраМасло за скоростната кутияСкоростна кутия RS5F70A3,00 литраСпецификация масло за скоростна кутияСкоростна кутия RS5F32AAPI GL4 SAE 75W-80Спецификация масло за скоростна кутияСкоростна кутия RS5F70AAPI GL4 SAE 75W-80Масло за автоматична скоростна кутияс CVT скоростна кутия8,10 литраМасло за автоматична скоростна кутияс автоматична скоростна кутия7,00 литраСпецификация масло за автоматична скоростна кутияОригинално маслоСпецификация масло за автоматична скоростна кутияс CVT скоростна кутияОригинално маслоМасло за сервоуправлението1,10 литраСпецификация масло за сервоуправлениетоATF Dexron IIIАнтифризсъс скоростна кутия6,60 литраАнтифризс CVT скоростна кутия6,80 литраСпецификация охладителна течностСредства за защита от замръзване на основата на етиленгликолСпирачна течност при смяна1,20 литраСпецификация спирачна течностDOT 4Средства за охлаждане климатична инсталация550 - 650 грамаСпецификация охлаждащи средстваR134aМасло климатична инсталация200 cm³Спецификация охлаждащо маслоKLH00 - PAGS0Обем на резервоара за гориво60 литраОсветлениеПредни фаровеСветлини за дневно каранеПринадлежащи артикулиDAY1Задни фаровеДопълнителни стоповеLEDВътрешни лампиИнтервали за смянаЗа сервизни данниАгрегатен ремък - интервал за проверкавсички 15.000 kmВъздушен филтър интервал за смянана всеки 60.000 km / 2 годиниФилтър за гориво интервал за смянана всеки 90.000 km / 6 годиниЗапалителни свещи интервал за смянана всеки 30.000 km / 2 годиниЗапалителни свещи интервал за смянасъс свещ за запалване с платинен централен електродвсички 90.000 kmСпирачна течност интервал за смянана всеки 60.000 km / 2 годиниОхлаждащи средства за двигателя интервал за смянапърво на 90.000 km / 5 години, след това всяка 60.000 km / 4 годинаМасло за автоматична скоростна кутия интервал за смянана всеки 60.000 km / 4 годиниМоторно масло и филтър интервал за смянавсички 15.000 kmПодновете батерията за дистанционно управлениена всеки 60.000 km / 2 годиниФилтър купе интервал за смянана всеки 30.000 km / веднъж годишноИнтервал на смяна на хладилния агент на климатикана всеки 2 годиниФилтър вентилация на картера интервал за смянана всеки 60.000 km / 2 годиниТечност за съединителя интервал за смянана всеки 60.000 km / 2 годиниИзбраното МПС е успешно добавено във вашия гараж. +
-
Огромен избор Над 800 000 авточасти
-
Купи на кредит с ТБИ Минимална сума 150 лв.
-
Експресна доставка Наложен платеж и преглед
-
14 дни срок Връщане или замяна