ARP болтове и шпилки Opel за Opel Insignia Saloon 2.0 Biturbo CDTI (69) - 190 коня дизел A 20 DTR - онлайн магазин
190 к.с - дизел
07.2008 - 12.2011
-
ARP 2000 5/16" connecting rod screws in 38.1mm length.
Universally applicable for all H-shank connecting rods.
ARP connecting rod bolts have been developed for the highest requirements and offer optimum safety.
The connecting rod bolts are heat treated and rolled, which gives them up to 10 times higher fatigue strength.
Especially for tuned engines highly recommended!
Connecting rod bearings best to replace directly with.A 3/8" nut should be used for installation.
More information on the correct tightening of the connecting rod bolts HERE
-
ARP 5/16 "rod bolts with 38,1mm in length.
Universally applicable for all H-Beam conrods .
ARP custom age 625 + have been developed for the highest requirements and provide optimum safety.
At high engine speed, it arrives at the Aufwertsbewegung the piston to high tensile forces acting on the connecting rod according to Kurbelwellenhub more or less.
To avoid this, a screw is recommended Pleulschraube tear as it has a tensile strength of 260-280 PSI, compared to having only a 2000 ARP Zugfestigkit of 220 PSI
The rod bolts are heat treated and rolled, giving them up to 10 times higher fatigue strength.
Especially for tuned engines highly recommended!
Best exchange directly connecting rod bearings.
(Price for one Bolt.)More information on how to properly tighten the connecting rod bolts
-
Digital High End Dial Indicator from ARP for measuring the extension of expansion screws.
When fitting connecting rod bolts, the tightening torque is only of secondary importance. Much more important is the extension of the screw.
This stretch can be measured accurately with the ARP dial gauge.
ARP has taken accuracy to the next level with the introduction of a digital stretch gauge that measures to the ten-thousandth (0.0001-inch).
Accurate readings are made by opposing ball and pin probes centered on the bolt. A uniquely designed aluminum handle facilitates operation.
ALWAYS fit and tighten connecting rod bolts with sufficient ARP Ultra Torque Paste!
For further information about assambling rod bolts correctly, click here
Here is our video on the correct installation of connecting rods and connecting rod bolts:
ARP strech gauge for a perfect conrod bolts assembly. If you want to torque your conrod bolts in a professional way you have to measure the strech and not the torque. This ARP gauge is individually adjustable to measure each kind of conrod bolts. Always use ARP ultra torque grease for conrod assembly.
Here is our video on the correct installation of connecting rods and connecting rod bolts:
"Spezial ARP ultra torque assembly lubricant for professional fittment of each kind of ARP bolts or studs.
All ARP bolts and studs threads should be thigthen up with this ARP Moly Assembly Lubricant called ultra torque to mentain correct torques specifications.
All ARP kit have this lubricant included.
""Spezial ARP ultra torque assembly lubricant for professional fittment of each kind of ARP bolts or studs.
All ARP bolts and studs threads should be thigthen up with this ARP Moly Assembly Lubricant called ultra torque to mentain correct torques specifications.
Big can (approx. 350 gramms) with brush included.
"M10 x 1.25 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M10 x 1.25 x 20 20 mm n.a. M10 x 1.25 x 25 25 mm n.a. M10 x 1.25 x 30 30 mm n.a. M10 x 1.25 x 35 35 mm n.a. M10 x 1.25 x 40 26 mm 14 mm M10 x 1.25 x 45 26 mm 19 mm M10 x 1.25 x 50 26 mm 24 mm M10 x 1.25 x 60 26 mm 34 mm M10 x 1.25 x 70 26 mm 44 mm M10 x 1.25 x 80 26 mm 54 mm M10 x 1.25 x 90 26 mm 64 mm M10 x 1.25 x 100 26 mm 74 mm M10 x 1.50 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M10 x 1.50 x 20 20 mm n.a. M10 x 1.50 x 25 25 mm n.a. M10 x 1.50 x 30 30 mm n.a. M10 x 1.50 x 35 35 mm n.a. M10 x 1.50 x 40 26 mm 14 mm M10 x 1.50 x 45 26 mm 19 mm M10 x 1.50 x 50 26 mm 24 mm M10 x 1.50 x 60 26 mm 34 mm M10 x 1.50 x 65 26 mm 39 mm M10 x 1.50 x 70 26 mm 44 mm M10 x 1.50 x 80 26 mm 54 mm M10 x 1.50 x 90 26 mm 64 mm M10 x 1.50 x 100 26 mm 74 mm M12 x 1.50 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M12 x 1.50 x 25 25 mm n.a. M12 x 1.50 x 30 30 mm n.a. M12 x 1.50 x 35 30 mm 5 mm M12 x 1.50 x 40 30 mm 10 mm M12 x 1.50 x 45 30 mm 15 mm M12 x 1.50 x 50 30 mm 20 mm M12 x 1.50 x 60 30 mm 30 mm M12 x 1.50 x 70 30 mm 40 mm M12 x 1.50 x 80 30 mm 50 mm M12 x 1.50 x 90 30 mm 60 mm M12 x 1.50 x 100 30 mm 70 mm M12 x 1.75 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M12 x 1.75 x 25 25 mm n.a. M12 x 1.75 x 30 30 mm n.a. M12 x 1.75 x 35 30 mm 5 mm M12 x 1.75 x 40 30 mm 10 mm M12 x 1.75 x 45 30 mm 15 mm M12 x 1.75 x 50 30 mm 20 mm M12 x 1.75 x 60 30 mm 30 mm M12 x 1.75 x 70 30 mm 40 mm M12 x 1.75 x 80 30 mm 50 mm M12 x 1.75 x 90 30 mm 60 mm M12 x 1.75 x 100 30 mm 70 mm M6 x 1.00 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M6 x 1.00 x 12 12 mm n.a. M6 x 1.00 x 16 16 mm n.a. M6 x 1.00 x 20 20 mm n.a. M6 x 1.00 x 25 25 mm n.a. M6 x 1.00 x 30 18 mm 12 mm M6 x 1.00 x 35 18 mm 17 mm M6 x 1.00 x 40 18 mm 22 mm M6 x 1.00 x 45 18 mm 27 mm M6 x 1.00 x 50 18 mm 32 mm M6 x 1.00 x 55 18 mm 37 mm M6 x 1.00 x 60 18 mm 42 mm M6 x 1.00 x 65 18 mm 47 mm M6 x 1.00 x 70 18 mm 52 mm M6 x 1.00 x 75 18 mm 57 mm M6 x 1.00 x 80 18 mm 62 mm M6 x 1.00 x 90 18 mm 72 mm M6 x 1.00 x 100 18 mm 82 mm M6 x 1.00 x 135 18 mm 117 mm M8 x 1.25 screws made of high quality ARP steel for universal use. Wherever you need it!
ARP screws are made from 8740 chromoly steel and have rounded threads.
With a tensile strength of up to 180,000 PSI, these are up to 30% stronger tensile steel than standard screws.
Further advantages of the ARP screws:
- 12 pt screw head
- 100% reusable
- rust free
- maintenance free
- extremely temperature resistant
- ARP design for easy installation
Price for a set of ARP screws with special washers (5 pieces)
ARP products are made of high quality material and can be reused for life!
specifications:
Underhead length (1) Thread length (2) Grip length (3) M8 x 1.25 x 12 12 mm n.a. M8 x 1.25 x 16 16 mm n.a. M8 x 1.25 x 20 20 mm n.a. M8 x 1.25 x 25 25 mm n.a. M8 x 1.25 x 30 22 mm 8 mm M8 x 1.25 x 35 22 mm 13 mm M8 x 1.25 x 40 22 mm 18 mm M8 x 1.25 x 45 22 mm 23 mm M8 x 1.25 x 50 22 mm 28 mm M8 x 1.25 x 55 22 mm 33 mm M8 x 1.25 x 60 22 mm 38 mm M8 x 1.25 x 65 22 mm 43 mm M8 x 1.25 x 70 22 mm 48 mm M8 x 1.25 x 75 22 mm 53 mm M8 x 1.25 x 80 22 mm 58 mm M8 x 1.25 x 85 22 mm 63 mm M8 x 1.25 x 90 22 mm 68 mm M8 x 1.25 x 100 22 mm 78 mm ARP Conrod bolt kit for Opel/Vauxhall 1.4L & 1.6L 8V M8.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
(Click on the PDF box to download instruction)ARP Conrod bolt kit for Opel/Vauxhall 1.4L 16V M9.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.ARP Conrod bolt kit for Opel/Vauxhall 2.0L 16V.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.
Perfectly crafted rolled threads from indestructible material.
These bolts are ideal for tuned engines and are highly recommended.
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.ARP Flywheel bolt kit for Opel/Vauxhall 2.0L 16V.
Forged from high strength chrome-molybdenum steel with 200,000 psi tensile strength nearly twice as stable as the best series bolts from factory OEM.- Perfectly crafted rolled threads from indestructible material.
- These bolts are ideal for tuned engines and are highly recommended by higher tourqe.
- Set of 8 pcs of high-strenght bolts
ARP - world market leader in the field of engine bolts produces top-quality products with unparalleled quality, unmatched strength and forged with highest precision.
ARP Head Stud Kit for VAUXHALL/OPEL 2.0L 16V.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Main Stud Kit for VAUXHALL/OPEL 2.0L 16 Valve.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel and so they are ideal for use in racing engines.
- Due to advanced manufacturing processes ARP studs reach highest strength and stability.
- Tensile strength of 200.000 psi (13,8t/cm²).
- Absolutely perfectly round and straight studs for a first-class assembly.
- All kits come with ARP hardened washers and high quality nuts.
- Harder, more durable, stable, and processed better than any OEM products.
- 10 times stronger threads than the competetive products by thread cut after curing.
- Highest ARP quality product for professional use.
- Fully reusable.
ARP Head Stud Kit for VAUXHALL/OPEL 2.0L 16V undercut studs.
ARP heavy duty studs are made of high strength and heat treated 8740 chrome-moly forged steel.
-Due to advanced manufacturing processes ARP studs reach highest strength and stability.
-Tensile strength of 200.000 psi (13,8t/cm²).
-Absolutely perfectly round and straight studs for a first-class assembly.
-All kits come with ARP hardened washers and high quality nuts.
-Harder, more durable, stable, and processed better than any OEM products.
-10 times stronger threads than the competetive products by thread cut after curing.
-Highest ARP quality product for professional use.
-Fully reusable.
(Click on the PDF box to download instruction)Single nut for all ARP studs. Should you ever lose one, no problem.
- 100% reusable
- Stainless
- Extremely temperature resistant
Price for a nut with a washer
Single nut in our high boost version for almost all stud bolt from ARP. Should you ever lose or damage one, no problem.
- 100% reusable
- stainless
- extremely temperature resistant
Price for one nut.
Spezial tool to fit ARP studs in the Cylinder head.
Some kits from ARP may include this tool, but we just sell it always seperately. This makes the kits much more cheaper in the end.
This tool is needed for the 1.8T engine.Internal multi-tooth socket for mounting ARP nuts and bolts.
12 square socket with 1/2 inch drive for tightening ARP nuts. This ARP tool is available in different sizes and is needed for the assembly of all ARP stud bolt and screws.
Available in the following sizes: 8-20mm
Спирачна система - Opel Insignia Saloon 2.0 Biturbo CDTI (69)ЗатвориОкачване на колелата - Opel Insignia Saloon 2.0 Biturbo CDTI (69)ЗатвориКормилна система - Opel Insignia Saloon 2.0 Biturbo CDTI (69)ЗатвориЗадвижване на колелата - Opel Insignia Saloon 2.0 Biturbo CDTI (69)ЗатвориТрансмисия - Opel Insignia Saloon 2.0 Biturbo CDTI (69)ЗатвориРемъчно задвижване - Opel Insignia Saloon 2.0 Biturbo CDTI (69)ЗатвориЧасти за двигател - Opel Insignia Saloon 2.0 Biturbo CDTI (69)ЗатвориЧасти за цилиндров блок - Opel Insignia Saloon 2.0 Biturbo CDTI (69)ЗатвориГарнитури - Opel Insignia Saloon 2.0 Biturbo CDTI (69)ЗатвориОхладителна система - Opel Insignia Saloon 2.0 Biturbo CDTI (69)ЗатвориКлиматична система - Opel Insignia Saloon 2.0 Biturbo CDTI (69)ЗатвориОтопление и вентилация - Opel Insignia Saloon 2.0 Biturbo CDTI (69)ЗатвориФилтри - Opel Insignia Saloon 2.0 Biturbo CDTI (69)ЗатвориМасла и течности - Opel Insignia Saloon 2.0 Biturbo CDTI (69)ЗатвориЗапалителна система - Opel Insignia Saloon 2.0 Biturbo CDTI (69)ЗатвориДатчици и сензори - Opel Insignia Saloon 2.0 Biturbo CDTI (69)ЗатвориГоривна система - Opel Insignia Saloon 2.0 Biturbo CDTI (69)ЗатвориЕлектрическа система - Opel Insignia Saloon 2.0 Biturbo CDTI (69)ЗатвориСтартова система - Opel Insignia Saloon 2.0 Biturbo CDTI (69)ЗатвориПочистване на стъклата - Opel Insignia Saloon 2.0 Biturbo CDTI (69)ЗатвориАуспуси и гърнета - Opel Insignia Saloon 2.0 Biturbo CDTI (69)ЗатвориЕдрогабаритни части - Opel Insignia Saloon 2.0 Biturbo CDTI (69)ЗатвориСветлини - Opel Insignia Saloon 2.0 Biturbo CDTI (69)ЗатвориИнтериор - Opel Insignia Saloon 2.0 Biturbo CDTI (69)ЗатвориДобавки - Opel Insignia Saloon 2.0 Biturbo CDTI (69)ЗатвориТунинг - Opel Insignia Saloon 2.0 Biturbo CDTI (69)ЗатвориАвтоаксесоари - Opel Insignia Saloon 2.0 Biturbo CDTI (69)ЗатвориЗадължително оборудване - Opel Insignia Saloon 2.0 Biturbo CDTI (69)ЗатвориИнструменти - Opel Insignia Saloon 2.0 Biturbo CDTI (69)ЗатвориТехнически характеристикиОбщи данниОбщи сведения основни стойностиВид на управлението на двигателяАнгренажен ремъкОбороти при макс. мощност4500 1/minОбороти при макс. въртящ момент2000 1/minМаксимален въртящ момент400 NmХод90,40 ммВътрешен диаметър на цилиндъра83,00 ммВентили за един цилиндър4Компенсация на луфта на вентилаХидроповдигачЪгъл на гнездото на вентила - всмукателен клапан45°Ъгъл на гнездото на вентила - изпускателен клапан45°Количество на нужните запалителни свещи/нагревателни свещи4Последователност на запалване1-3-4-2Степен на сгъстяване16,50 :1Охладителна системаТермостатът отваря при температура88°Вентилаторът на радиатора се изключва при температураВариант 197°при ниски оборотиВентилаторът на радиатора се изключва при температураВариант 2102°при високи оборотиВентилаторът на радиатора се включва при температураВариант 1100°при ниски оборотиВентилаторът на радиатора се включва при температураВариант 2105°при високи оборотиСистема за горивоСистема за гориво общи сведенияВид на моторното горивоДизелОбработка на сместа обозначениеCommon RailОбработка на сместа производител"Бош"Обработка на сместа типEDC 17CP21Контролни стойности за изгорелите газовеОбщи стойности, съществени за изгорелите газовеРециркулация на изгорелите газовеДаПоложение щепсел за диагнозаОбороти на празен ход при скоростната кутия770 - 930 1/minОбороти на празен ход при автоматична скоростна кутия770 - 930 1/minМинимална температура на моторното масло при AU60 °CСтойности за изгорелите газове дизелово горивоКондициониране дизелови двигатели обороти5100 1/minКондициониране дизелови двигатели при рязко увеличаване на газта5Обороти, ограничавани от регулатора5000 - 5200 1/minМаксимална стойност K1,30 1/mДанни за ходовата частДжанти и гумиНалягане при пълнене на гумите отпред2,20 barНалягане при пълнене на гумите отпредEco2,70 barНалягане при пълнене на гумите отпред225/45 R 182,50 barНалягане при пълнене на гумите отпред245/40 R 192,20 barНалягане при пълнене на гумите отпред245/35 R 202,40 barНалягане при пълнене на гумите отзад2,00 barНалягане при пълнене на гумите отзадEco2,60 barНалягане при пълнене на гумите отзад225/45 R 182,30 barНалягане при пълнене на гумите отзад245/40 R 192,00 barНалягане при пълнене на гумите отзад245/35 R 202,20 barХодова част размериБаза2737 ммКоловоз предни колела1585 ммКоловоз задни колела1587 ммСпирачна уредбаИзмерения на спирачкатаДебелина на спирачния диск преден мост30,00 ммДебелина на спирачния диск граница на износване преден мост27,00 ммМаксимално странично биене на спирачния диск преден мост0,05 ммДебелина на спирачния диск заден мостRPO - код J6012,00 ммДебелина на спирачния диск заден мостRPO - код J6123,00 ммДебелина на спирачния диск заден мостRPO - код J6223,00 ммДебелина на спирачния диск граница на износване заден мостRPO - код J6010,00 ммДебелина на спирачния диск граница на износване заден мостRPO - код J6121,00 ммДебелина на спирачния диск граница на износване заден мостRPO - код J6221,00 ммМаксимално странично биене на спирачния диск заден мост0,05 ммСпирачен диск диаметър преден мостRPO - код J60296,00 ммСпирачен диск диаметър преден мостRPO - код J61321,00 ммСпирачен диск диаметър преден мостRPO - код J62337,00 ммСпирачен диск диаметър заден мостRPO - код J60292,00 ммСпирачен диск диаметър заден мостRPO - код J61315,00 ммСпирачен диск диаметър заден мостRPO - код J62315,00 ммЕлектроникаИзмервани стойности от датчиците и изпълнителните елементиСъпротивление - температурен датчик за двигателя при 0°5887 OhmСъпротивление - температурен датчик за двигателя при 5°4707 OhmСъпротивление - температурен датчик за двигателя при 15°3075 OhmСъпротивление - температурен датчик за двигателя при 20°2511 OhmСъпротивление - температурен датчик за двигателя при 25°2063 OhmСъпротивление - температурен датчик за двигателя при 35°1432 OhmСъпротивление - температурен датчик за двигателя при 40°1200 OhmСъпротивление - температурен датчик за двигателя при 45°1009 OhmСъпротивление - температурен датчик за двигателя при 50°851 OhmСъпротивление - температурен датчик за двигателя при 60°612 OhmСъпротивление - температурен датчик за двигателя при 80°329 OhmСъпротивление - температурен датчик за двигателя при 100°186 OhmОбщи сведения за електрическата частНапрежение на акумулатора12 волтаКапацитет на акумулатора54 AhАкумулатор ток на изпитание в студено състояние600 ампераАлтернатор производителВариант 1VALEOАлтернатор производителВариант 2DENSOГенератор типПроизводител ValeoTG13Генератор типDensoSC2Заряден ток за алтернатораПроизводител Valeo125 ампераЗаряден ток за алтернатораDenso155 ампераКонсумативиКоличество запълващи вещества и спецификацииДвигателно масло с филтър4,50 литраВискозност моторно маслоGM-LL-B-0250W-30, 0W-40, 5W-30, 5W-40Вискозност моторно маслоDexos 2SAE 0W-30|SAE 0W-40|SAE 5W-30|SAE 5W-40Спецификация двигателно маслоGM-LL-B-025|DEXOS 2Масло за скоростната кутияпри сменна скоростна кутия1,70 литраНовите скоростни кутии са предварително напълнени с 0,68 литра.Масло за скоростната кутияКоличество за смяна2,20 литраМасло за скоростната кутияПърво пълнене2,38 литраСпецификация масло за скоростна кутияATF AW-1Масло за автоматична скоростна кутияКоличество за смяна3,00 литраСпецификация масло за автоматична скоростна кутияСкоростна кутия AF40-6ATF AW-1Масло за сервоуправлението1,40 литраСпецификация масло за сервоуправлениетоATF Dexron VIАнтифриз9,00 литраСпецификация охладителна течностB 040 1065Спирачна течност при смянасъс скоростна кутия1,25 литраСпирачна течност при смянас автоматична скоростна кутия1,00 литраСпецификация спирачна течностDOT 4 PlusСпецификация на течности за съединителяDOT4Средства за охлаждане климатична инсталация600 грамаСпецификация охлаждащи средстваR134aМасло климатична инсталацияКомпресор Sanden PXE16110 cm³Масло климатична инсталацияКомпресор Delphi150 cm³Спецификация охлаждащо маслоPAGОригинално маслоОбем на резервоара за гориво70 литраОсветлениеПредни фаровеКъси светлиниот 2014 и нагоре, с халогенни фаровеHIR2 12V 55W PX22DДълги светлиниот 2014 и нагоре, с халогенни фаровеHIR2 12V 55W PX22DСветлини за дневно каранес халогенни фарове, с техника LEDLEDОригинален детайлСветлини за дневно каранес би-ксенонLEDОригинален детайлСветлини за дневно каранеПринадлежащи артикулиDAY1Габаритис халогенни фарове, с техника LEDLEDОригинален детайлГабаритис би-ксенонLEDОригинален детайлМигач преденот 2014 и нагоре, с би-ксенонPSY24W 12V 24W PG20/4Задни фаровеЗадна светлинаот 2014 и нагореLEDОригинален детайлСтопот 2014 и нагореLEDОригинален детайлДопълнителни стоповеLEDОригинален детайлВътрешни лампиИнтервали за смянаЗа сервизни данниУправление на двигателя със зъбчат ремък променлив интервалдо 2010на всеки 120.000 km / 10 годиниУправление на двигателя със зъбчат ремък променлив интервалот 2011 и нагорена всеки 120.000 km / 6 годиниОбтяжна ролка управление на двигателя - интервал за смянана всеки 120.000 km / 10 годиниПаразитна ролка - ангренажен ремък интервал за смянана всеки 120.000 km / 10 годиниАгрегатен ремък интервал за смянадо 2010на всеки 150.000 km / 10 годиниАгрегатен ремък интервал за смянаот 2011 и нагорена всеки 150.000 km / 6 годиниВъздушен филтър интервал за смянана всеки 60.000 km / 4 годиниСпирачна течност интервал за смянана всеки 2 годиниПодновете батерията за дистанционно управлениена всеки 2 годиниФилтър купе интервал за смянана всеки 60.000 km / 2 годиниФилтър купе интервал за смянапри тежки условия на експлоатацияна всеки 30.000 km / веднъж годишноФилтър с активен въглен за вътрешното пространство - интервал за смянана всеки 60.000 km / 2 години(ако е наличен)Филтър с активен въглен за вътрешното пространство - интервал за смянапри тежки условия на експлоатацияна всеки 30.000 km / веднъж годишноИзбраното МПС е успешно добавено във вашия гараж. +
-
Огромен избор Над 800 000 авточасти
-
Купи на кредит с ТБИ Минимална сума 150 лв.
-
Експресна доставка Наложен платеж и преглед
-
14 дни срок Връщане или замяна